Cart
← Back to Product Catalog

Neutrik – NA2-IO-DLINE

I/O Interfaces

More details

Similar Products

focusrite-rednet-D16R_600px_0|focusrite-rednet-D16R_600px_0
  • Focusrite

Focusrite – RedNet D16R

RedNet D16R AES is a 1U, 19in rack-mount Dante interface featuring 16 channels of AES/EBU connectivity to and from the Dante audio network. RedNet D16R AES is a 1U, 19in rack-mount Dante interface featuring 16 channels of AES/EBU connectivity to and from the Dante audio network. Perfect for bridging between digital consoles, power amplifiers or any other AES3 equipped audio equipment and any Dante network, RedNet D16R has SRC (Sample Rate Conversion) on each input pair allowing plug-and-play operation with any AES3 source. Word Clock I/O and DARS (Digital Audio Reference Signal) connections allow synchronisation with a wide range of external sources and hardware, while S/PDIF I/O allows the integration of equipment such as CD or solid-state recorders/players. Key features
  • 16 Channel bi-directional RedNet AES3 Interface for Dante Networks.
  • Power supply and Ethernet redundancy with auto switchover in case of failure, and locking etherCON network connectors.
  • Sample rate conversion allows external equipment to run at any sample rate.
  • Compact 1U chassis allows maximum functionality in minimum rack space.
  • Two 8-channel AES59 combined I/O DB25 connections, plus a pair of XLR3 connectors duplicating channels 1 & 2.
  • Rear panel XLR input connector either be used as a DARS input or as a traditional AES3 audio input.
  • S/PDIF input and outputs provided on RCA connectors; ideal for connecting CD players or solid-state recorders.
  • Word Clock I/O on BNC connectors allows synchronisation of the Dante network to house clock, or syncing external equipment to the Dante network.
  • RedNet Control and Dante control software allow routing and control from your audio computer system via a software control panel – no hardware patching required.
    I/O Interfaces
See the product
Dante官网logo
  • BARE

BARE – DE-6

Features： 1. The audio signal and power transmission of the speaker are realized through the same network cable. 2. The RJ45 interface on the back panel of the box is equipped with XLR firmware, which can be used for waterproofing and strengthen the connection between the box and the wire. 3. The network cable realizes signal transmission and power supply; 4. The IP address is automatically assigned through the router DHCP; 5. Each receiving channel can be controlled independently, and it can be applied to any location in the local area network 6. It has high efficiency and high sound energy output, excellent sound quality, perfect protection function and good electromagnetic compatibility characteristics. 7. The built-in DSP network active speaker can remotely control the EQ and pressure limit of the active speaker on the PC side. 8. It has complete protection functions (short circuit protection, over current protection, over and under protection, DC protection, power limit, temperature limit, long-term output power limit, clipping limiter). 9. The speaker uses Dante digital audio interface and PoE network power supply to drive the power amplifier module, and only one network cable is needed to realize the simultaneous supply of audio signal and power.
    I/O Interfaces
See the product
TASCAM_-_ML-4D-OUT-E
  • TASCAM

TASCAM – ML-4D/OUT-E

Built-in DSP 4 line outputs Dante converter to respond to various needs of contractor market and professional audio scene. Built-in DSP 4 line outputs Dante converter to respond to various needs of contractor market and professional audio scene. The ML-4D/OUT-E is a compact converter that converts Dante input signals into 4-channel line output signals. With half the size of a standard 1U rack, the ML-4D/OUT-E is suitable for different Dante systems as an exquisite analog output unit. The built-in DSP mixer enables small scale systems to fully perform with a variety of input/output models the TASCAM Dante Compact Processor Series offers. ML-4D/OUT-E supports up to 96kHz/24bit and uses Euroblock connectors for analog line output.  
    I/O Interfaces
See the product