Cart
← Back to Product Catalog

DSPPA – DT2200

I/O Interfaces

More details

Similar Products

proco-aodom-2|proco-aodom-2
  • ProCo

ProCo – AoDoM 2

The AoDoM 2 channel provides one RJ45 Dante input and two Neutrik NC3MXX-BAG series black XLR analog outputs. Using our rugged aluminum extrusion channels and hand soldered, 3 ft. analog audio tails, ProCo AoDoM modules provide simple connection of analog equipment to a Dante network and provide studio-quality, low-latency audio via the XLR connectors. Comaptible with any Dante ecosystem and provides line level analog audio signal to output devices. 
  • Dante audio input
  • Two channels of analog output
  • Rugged aluminum extrusion housing
  • resilient cable strain relief
  • Neutrik black XLR connectors
  • 3 ft. ProCo MIC3 balanced cable with braises shielf
  • RJ45 metal connector with integrated LED's
  • 1 year limited warranty
    I/O Interfaces
See the product
ru-nl2p_400px
  • RDL

RDL – RU-NL2P

The RU-NL2 is a high quality Dante network to line level interface. The RU-NL2 converts two Dante network audio channels to +4 dBu balanced line level that corresponds to a network digital audio level of -18 dBFS. LED audio signal indicators are provided. Model RU- NL2P operates from PoE. The RU-NL2 is a high quality Dante network to line level interface. The RU-NL2 converts two Dante network audio channels to +4 dBu balanced professional line level. The front panel features signal LEDs that indicate audio presence for each of the received network signal channels. Balanced +4 dBu audio levels correspond to a network digital audio level of -18 dBFS. The noise floor is better than 80 dB below operating level. Crosstalk is below the noise floor between the outputs across the entire audio spectrum. The RU-NL2 is also available in a PoE version (RU-NL2P). If PoE power and an external 24 Vdc supply are both feeding an RU-NL2P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. 
    I/O Interfaces
See the product
  • Turtle AV

Dante 2CH Bluetooth Input Adapter

Dante 2CH Bluetooth Input Adapter
  • Two-channel Bluetooth audio to Dante 2CH digital audio
  • Supports Bluetooth V5.1, SBC/AAC/APTX/APTX-LL/APTX-HD, up to 24bit/192KHz
  • Dante audio sampling rate supports 44.1/48/88.2/96KHz@24bit
  • Configurable Dante audio delay with support for 1, 2, or 5 milliseconds
  • Analog audio input with support for 5-level gain adjustment
  • PoE and USB-C power options
  • TAA compliant
  • Made from 90% recycled plastic, including 5% Ocean Bound Plastic
    I/O Interfaces
  • Dante Ch: 0x2
  • 16-bit, 24-bit
See the product