Cart
← Back to Product Catalog

Mandozzi Elettronica – BEA3X

I/O Interfaces

More details

Similar Products

Dante官网logo
  • BARE

BARE – DP-8

Features： 1. The frameless design of the mesh cover makes it fit the wall and ceiling better; 2. The network cable realizes signal transmission and power supply; 3. Automatically assign IP address through router DHCP; 4. Each receiving channel can be controlled independently, and can be applied to any location in the local area network 5. It has high efficiency and high sound energy output, excellent sound quality, perfect protection function and good electromagnetic compatibility characteristics. 6. The built-in DSP network active speaker can remotely control the EQ and pressure limit of the active speaker on the PC side. 7. It has perfect protection functions (short circuit protection, over current protection, over and under protection, DC protection, power limit, temperature limit, long-term output power limit, clipping limiter). 8. The speaker uses Dante digital audio interface and PoE network power supply to drive the power amplifier module, and only one network cable is needed to realize the simultaneous supply of audio signal and power.
    I/O Interfaces
  • Dante Ch: 1x0
  • 24-bit
See the product
hugel-hsm
  • Hugel

Hugel – HSM

The headset module (HSM) enables an attachment of a stereo headset into a Dante network. Either dynamic or electret microphones can be used. The headphone power level can be individually adjusted for left and right channel. With a power boost switch an additional gain of 9dB can be set for noisy environments. The module is PoE powered (13W).

    I/O Interfaces
See the product
ru-bnfp_400px|ru-bnfp_400px
  • RDL

RDL – RU-BNFP

The RU-BNF is a high quality bi-directional interface that converts three Dante channels to RDL Format-A and one Dante channel to balanced AUX output. It also converts three Format-A pairs and one AUX input to Dante channels. The RU-BNF is compatible with Format-A twisted-pair end-points. Model RU-BNFP operates from PoE. The RU-BNF is a high quality bi-directional interface that converts three Dante channels to RDL Format-A and one Dante channel to a balanced AUX output. It also converts three Format-A pairs and one AUX input to Dante channels. The RU-BNF is compatible with RDL Format-A twisted-pair end-point products. RDL’s Format-A system utilizes the 4 pairs of a standard CATx cable; 3 pairs (pairs A, B and C) are designated for sending and receiving audio and the fourth pair is used to distribute 24 Vdc to connected Format-A products.  The RU-BNF provides signal presence metering and is equipped to power connected Format-A endpoints. The RU-BNF is also available in a PoE version (RU-BNFP). If PoE power and an external 24 Vdc supply are both feeding an RU-BNFP, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply.
    I/O Interfaces
See the product