Cart
← Back to Product Catalog

Danacoid – DA-0404D

I/O Interfaces

More details

Similar Products

Dante官网logo
  • BARE

BARE – DE-6

Features： 1. The audio signal and power transmission of the speaker are realized through the same network cable. 2. The RJ45 interface on the back panel of the box is equipped with XLR firmware, which can be used for waterproofing and strengthen the connection between the box and the wire. 3. The network cable realizes signal transmission and power supply; 4. The IP address is automatically assigned through the router DHCP; 5. Each receiving channel can be controlled independently, and it can be applied to any location in the local area network 6. It has high efficiency and high sound energy output, excellent sound quality, perfect protection function and good electromagnetic compatibility characteristics. 7. The built-in DSP network active speaker can remotely control the EQ and pressure limit of the active speaker on the PC side. 8. It has complete protection functions (short circuit protection, over current protection, over and under protection, DC protection, power limit, temperature limit, long-term output power limit, clipping limiter). 9. The speaker uses Dante digital audio interface and PoE network power supply to drive the power amplifier module, and only one network cable is needed to realize the simultaneous supply of audio signal and power.
    I/O Interfaces
See the product
mansion-DIR1222A|mansion-DIR1222A
  • Mansion

Mansion – DIR1222A

DIR1222A is a high quality Dante interface box for converting Dante channels to Analogue Audio outputs. DIR1222A is a high quality Dante interface box for converting Dante channels to Analogue Audio outputs. Features
  • Dante Interface for Audio Input
  • RCA output Jacks on front panel
  • Converts Dante Audio Signal to Unbalanced Line Level
  • Output Gain Control on front panel
  • Selectable Dante Sample Rates: 44.1 kHz, 48 kHz
  • High Resolution Digital to Analog Conversion
  • Power over Ethernet (PoE)
  • Excellent Audio quality
    I/O Interfaces
See the product
ctp-systems-DIO88|ctp-systems-DIO88
  • CTP Systems

CTP Systems – DIO88

The DIO88 is an inexpensive way to get your analogue signals into and out of the Dante network. The unit has eight XLR inputs and eight XLR outputs. The secondary Dante network connector can be selected to operate either in redundant mode or as a switch output to daisy chain more Dante equipped devices. The DIO88 is an inexpensive way to get your analogue signals into and out of the Dante network. The unit has eight XLR inputs and eight XLR outputs. The secondary Dante network connector can be selected to operate either in redundant mode or as a switch output to daisy chain more Dante equipped devices. The init includes a power indicator and network connection indication on the RJ45 jacks. 
    I/O Interfaces
See the product