Dante-enabled Product Catalog

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 16.0MD provides 16 balanced analog audio inputs and 0 outputs. Each input accommodates microphone through line level signals with a gain range of -60 to +24dBu. +48V phantom power is individually switchable on each input. With DB-25/AES59 terminations.

RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status.

The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller.

Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack.

All units can also be operated in Livewire+ AES67 interoperability mode.

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 0.16LD provides 16 balanced outputs. the output levels are configurable up to +24dBu. With DB-25/AES59 terminations.

RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status.

The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller.

Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack.

All units can also be operated in Livewire+ AES67 interoperability mode.

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 0.32LD provides 32 balanced outputs. the output levels are configurable up to +24dBu. With DB-25/AES59 terminations.

RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status.

The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller.

Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack.

All units can also be operated in Livewire+ AES67 interoperability mode.

The world's first paperless multimedia congress system, developed by TAIDEN as early as in 2010, has ushered in a new era for the conferencing industry and has been used at many high-profile international conferences and meeting venues, testifying in return to its excellence and superiority.

Not stopping there, TAIDEN later launched its third generation paperless multimedia congress system in 2016. The new system boasts of superb HD paperless

System Features:

• Especially designed for high-level meetings, such as Summits, congresses, conventions, parliaments and city councils
• The first Paperless Multimedia Congress System in the world
• Based on TAIDEN independent intellectual property mMediaCongress^TM platform, never subject to viral infection, hacker-proof, safe and reliable
• Paperless Multimedia Congress Terminal - equipped with a 14" (1920x1080) HD TFT LCD touch panel, offerrng better paperless event experience including document reading, HD video watching, interactive meeting management (discussion, voting, 64 CHs x 2 interpretation) and meeting services
• Capacitive touch panel supporting multi-touch, convenient and efficient for operation
• Built-in 8-megapixel camera with flashlight, ingenious video conversation function
• Based on TAIDEN originated GMC-STREAM Gigabit Multimedia Congress Stream technology, all audio and video signals are transmitted via a Cat.6 Gigabit network cable. GMC-STREAM fully guarantees the real-time performance and stability of the important data stream of the meeting, such as audio, voting information, and control information
• Based on ingenious CongressMatrix^TM technology, integrated n×8 audio matrix processor to realize 8 channels group output function
• Microphone-array technology for HCS-8368A series
• E-ink nameplate can be connected
• Optional printed nameplate
• Increased reliability with “Closed Loop - Daisy Chain” connection topology
• 48 kHz audio sampling, 64 audio channels, each with a 30 Hz to 20 kHz frequency response for perfect sound quality
• Low power consumption design
• Supports Dante protocol to connect to peripheral digital devices without losing any sound quality
• Equipped with optical fiber interface to combine two widely separated conference rooms to form one unique coherent system
• Dual connection backup via optical fiber and Cat.5 cable between Congress Main Unit and Congress Extension Main Unit
• System power controllable by central control system
• Supports combining and separating conference rooms
• Booth combination & share system
• Connectable to multi channel audio input or output devices for versatile expansion of the system
• Connection facility for additional condenser or dynamic microphones, expanding user’s application spectrum
• Integrated USB interfaces in the Congress Main Unit for system upgrading and saving system parameters. Convenient for system maintenance
• Downward compatible with TAIDEN HCS-4100/50 Fully Digital Congress System

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 32.0MD provides 32 balanced analog audio inputs and 0 outputs. Each input accommodates microphone through line level signals with a gain range of -60 to +24dBu. +48V phantom power is individually switchable on each input. With DB-25/AES59 termination.

RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status.

The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller.

Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack.

All units can also be operated in Livewire+ AES67 interoperability mode.

The world's first paperless multimedia congress system, developed by TAIDEN as early as in 2010, has ushered in a new era for the conferencing industry and has been used at many high-profile international conferences and meeting venues, testifying in return to its excellence and superiority.

Not stopping there, TAIDEN later launched its third generation paperless multimedia congress system in 2016. The new system boasts of superb HD paperless experience, greater system reliability, budget-conscious integration of functions and convenient management with its ultra-thin design, larger capacitive touch screen and higher megapixel camera. Either tabletop or flush-mounted model provides its users with faster, more convenient and efficient operation experience. Another innovative and brand-new member — the dual microphone paperless multimedia congress terminal with an extra backup microphone is also added to the growing product line.

HCS-8600MIO/16D Special Features:

16 Channels Audio Input & Output Device (16 channels audio inputs & outputs, Dante interface, single-mode optical fiber interface)

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 8.8LR provides 8x8 balanced analog audio inputs and outputs. Each input accommodates microphone through line level signals with a gain range of -60 to +24dBu. +48V phantom power is individually switchable on each input. Output levels are configurable up to +24dBu. With RJ-45/StudioHub + GPIO Connector close-up.

RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status.

The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller.

Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack.

The world's first paperless multimedia congress system, developed by TAIDEN as early as in 2010, has ushered in a new era for the conferencing industry and has been used at many high-profile international conferences and meeting venues, testifying in return to its excellence and superiority.

Not stopping there, TAIDEN later launched its third generation paperless multimedia congress system in 2016. The new system boasts of superb HD paperless

experience, greater system reliability, budget-conscious integration of functions and convenient management with its ultra-thin design, larger capacitive touch screen and higher megapixel camera. Either tabletop or flush-mounted model provides its users with faster, more convenient and efficient operation experience. Another innovative and brand-new member — the dual microphone paperless multimedia congress terminal with an extra backup microphone is also added to the growing product line.

System Features:

• Especially designed for high-level meetings, such as Summits, congresses, conventions, parliaments and city councils
• The first Paperless Multimedia Congress System in the world
• Based on TAIDEN independent intellectual property mMediaCongressTM platform, never subject to viral infection, hacker-proof, safe and reliable
• Paperless Multimedia Congress Terminal - equipped with a 14" (1920x1080) HD TFT LCD touch panel, offerrng better paperless event experience including document reading, HD video watching, interactive meeting management (discussion, voting, 64 CHs x 2 interpretation) and meeting services
• Capacitive touch panel supporting multi-touch, convenient and efficient for operation
• Built-in 8-megapixel camera with flashlight, ingenious video conversation function
• Based on TAIDEN originated GMC-STREAM Gigabit Multimedia Congress Stream technology, all audio and video signals are transmitted via a Cat.6 Gigabit network cable. GMC-STREAM fully guarantees the real-time performance and stability of the important data stream of the meeting, such as audio, voting information, and control information
• Based on ingenious CongressMatrixTM technology, integrated n×8 audio matrix processor to realize 8 channels group output function
• Microphone-array technology for HCS-8368A series
• E-ink nameplate can be connected
• Optional printed nameplate
• Increased reliability with “Closed Loop - Daisy Chain” connection topology
• 48 kHz audio sampling, 64 audio channels, each with a 30 Hz to 20 kHz frequency response for perfect sound quality
• Low power consumption design
• Supports Dante protocol to connect to peripheral digital devices without losing any sound quality
• Equipped with optical fiber interface to combine two widely separated conference rooms to form one unique coherent system
• Dual connection backup via optical fiber and Cat.5 cable between Congress Main Unit and Congress Extension Main Unit
• System power controllable by central control system
• Supports combining and separating conference rooms
• Booth combination & share system
• Connectable to multi channel audio input or output devices for versatile expansion of the system
• Connection facility for additional condenser or dynamic microphones, expanding user’s application spectrum
• Integrated USB interfaces in the Congress Main Unit for system upgrading and saving system parameters. Convenient for system maintenance
• Downward compatible with TAIDEN HCS-4100/50 Fully Digital Congress System

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 16.16MR provides 16x16 balanced analog audio inputs and outputs. Each input accommodates microphone through line level signals with a gain range of -60 to +24dBu. +48V phantom power is individually switchable on each input. Output levels are configurable up to +24dBu. With RJ-45/StudioHub + GPIO Connector close-up.

RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status.

The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller.

Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack.

The Yamaha SWR switch lineup, featuring high-performance L2 switches for fixed installations, has been expanded to provide a wider range of models for a wider range of applications.

In addition to VLAN functionality, the new SWR2310-28GT and SWR2310-18GT offer high port counts and features such as 10G uplink ports for long-distance transmission of multichannel 96 kHz data, making them ideal choices for safe, stable backbone operation in large-scale systems. As with other SWR/SWP switches, Yamaha LAN Monitor software provides clear visual system status monitoring that makes Dante system setup easy.

Models:

• SWR2310-28GT
• SWR2310-18GT
• SWR2310-10G

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 32.32MR provides 32x32 balanced analog audio inputs and outputs. Each input accommodates microphone through line level signals with a gain range of -60 to +24dBu. +48V phantom power is individually switchable on each input. Output levels are configurable up to +24dBu. With RJ-45/StudioHub + GPIO Connector close-up.

RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status.

The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller.

Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack.

All units can also be operated in Livewire+ AES67 interoperability mode.

The DAC-122 is an audio matrix, equipped with two inputs, that enables you to send uncompressed audio with low latency using standard TCP/ IP Ethernet network. It’s remotely controlled through your network and can be placed anywhere in a facility.

Each of the 2 balanced analog inputs and 2 outputs may be assigned to any Dante™ flow in the system, either by means of the Audinate’s Dante™ Controller Windows or OSX application.

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 16.0MR provides 16 balanced analog audio inputs and 0 outputs. Each input accommodates microphone through line level signals with a gain range of -60 to +24dBu. +48V phantom power is individually switchable on each input. With RJ-45/StudioHub + GPIO Connector close-up.

RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status.

The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller.

Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack.

All units can also be operated in Livewire+ AES67 interoperability mode.

The AV-WALL-DT4o-LE is a cost-effective wall box in an incredibly small size of less than 45x45mm.

Features:

• 2 XLR pro line out
• Mini jack stereo out

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 0.16MR provides 16 balanced outputs. the output levels are configurable up to +24dBu. With RJ-45/StudioHub + GPIO Connector close-up.

RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status.

The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller.

Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack.

All units can also be operated in Livewire+ AES67 interoperability mode.

WP22DN is a wall panel interface with Dante™ and AES67 digital audio transport protocols compatibility.

It features 2 audio MIC/LINE Combo connector inputs in its frontal panel and 2 Dante™ conversion channels either directly or by the sum of the analogue inputs channels (stereo to mono conversion). Also, it features 2 analogue outputs with duplicated connectors in XLR format for the front panel and Euroblock on the rear panel, both linked to 2 Dante™ channels coming from the local network. It supports PoE supply or local power supply.

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 32.0MR provides 32 balanced analog audio inputs and 0 outputs. Each input accommodates microphone through line level signals with a gain range of -60 to +24dBu. +48V phantom power is individually switchable on each input. With RJ-45/StudioHub + GPIO Connector close-up.

RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status.

The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller.

Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack.

Expand Analog I/O Using Dante.  For use with Symetrix Radius, Prism and Edge DSPs, the Symetrix Dante I/O Expanders use Composer for setup. Using Composer eliminates switches, circuit board jumpers, and mechanical adjustments as well as the need for third party software applications.

xIO Stage 4×4

• Premium 4 IN x 4 OUT Dante digital snake.
• Neutrik metal body DL series XLR connectors.
• 14 gauge A1008 steel construction.

The SpeechLine Multi-Channel Receiver with its 10 variants in 2 or 4 channels is the perfect addition to the SpeechLine series. Thanks to its unobtrusive design, the Multi-Channel Receiver can be installed quickly and easily in any room, whether on the wall or ceiling. The device can be operated with a single network cable, thanks to PoE and Dante. Complex analog audio cabling is a thing of the past.

The Multi-Channel Receiver also offers a convenient solution for existing installations. Thanks to an integrated auto mixer and the analog mix output, all audio channels can be used simply as a sum signal. The audio mix is also available digitally via Dante, which allows an extension of the existing setup without exchanging the DSP.

Due to the bidirectional communication between receiver and transmitter, all settings of the mobile transmitters can easily be made in the Sennheiser Control Cockpit. The receiver’s automatic frequency management eliminates the need for manual frequency settings and the automatic interference management guarantees maximum transmission reliability.

The user-friendly pairing function ensures a reliable connection between transmitter and receiver. Network integration also makes it possible to remotely control and monitor the receiver via a media control system (e.g. AMX, Crestron). Due to the integrated antennas, a complex antenna installation is no longer necessary.

Features

• Automatic Gain Control
• Automatic Frequency management
• AES 256 encryption
• 2-port Dante
• PoE
• Analog Mix Output
• One status LED per Link
• Remote control via Control Cockpit or media control
• Wall, ceiling or mic stand mounting
• Integrated Automixer

The SL MCR DW comes in 10 variants

• SL MCR 2 DW-3 (2 channel EU)
• SL MCR 2 DW-4 (2 channel US)
• SL MCR 2 DW-5 (2 channel Japan)
• SL MCR 2 DW-6 (2 channel Taiwan)
• SL MCR 2 DW-7 (2 channel Brazil)
• SL MCR 4 DW-3 (4 channel EU)
• SL MCR 4 DW-4 (4 channel US)
• SL MCR 4 DW-5 (4 channel Japan)
• SL MCR 4 DW-6 (4 channel Taiwan)
• SL MCR 4 DW-7 (4 channel Brazil)

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format.

The 16.16MD provides 16x16 balanced analog audio inputs and outputs. Each input accommodates microphone through line level signals with a gain range of -60 to +24dBu. +48V phantom power is individually switchable on each input. Output levels are configurable up to +24dBu. With DB-25/AES59 terminations.

RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status.

The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller.

Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack.

All units can also be operated in Livewire+ AES67 interoperability mode.

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format.

The 32.32MD provides 32x32 balanced analog audio inputs and outputs. Each input accommodates microphone through line level signals with a gain range of -60 to +24dBu. +48V phantom power is individually switchable on each input. Output levels are configurable up to +24dBu. With DB-25/AES59 terminations.

RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status.

The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller.

Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack.

All units can also be operated in Livewire+ AES67 interoperability mode.

The HC Bridge SRC provides 256 bi-directional channels of sample rate conversion for AoIP networks. HC bridge SRC facilitates connecting audio between devices running at different sample rates or in different clock domains on a Dante (48khz and 96khz), AES67 or ST 2110-30 networks. The two network connections can be physically or virtually separate networks, providing control isolation between two sets of equipment where an “AoIP discovery and control firewall” is required. A HC bridge SRC includes 2 HC cards, each HC card provides 512 Tx and 512 Rx channels at 48khz, 256 Tx and 256 Rx at 96khz, with 128 Tx and 128 Rx streams at all sample rates. Each card includes redundant pair SFP cages for RJ45 or fibre Dante/AoIP connectivity.

The HC Bridge provides 512 bi-directional channels of network bridging and/or conversion for AoIP networks; Dante, AES67 and ST 2110. The two network connections can be physically or virtually separate networks, providing control isolation between two sets of equipment where an “AoIP discovery and control firewall” is required. The HC Bridge and Dante HC cards are also used with System T Tempest processing engines.

A HC bridge includes 2 HC cards, each HC card provides 512 Tx and 512 Rx channels at 48khz, 256 Tx and 256 Rx at 96khz, with 128 Tx and 128 Rx streams at all sample rates. Each card includes redundant pair SFP cages for RJ45 or fibre AoIP connectivity. Plus 4 SFP HC link connections, for redundant cable and redundant tempest engine configurations.

The Symphony I/O Mk II 8×8 MP and Symphony I/O Mk II 16 MP Connect series audio interfaces deliver Symphony-quality sound with robust, high-performance AD/DA converters and Apogee’s Advanced Step Gain Architecture™ mic preamps at unprecedented prices. Using cutting edge components and a simplified, optimized analog circuit design, Apogee engineers are able to place more AD/DA converters and mic preamps on a single module board. The result is a single Symphony I/O Mk II with up 32 mic preamps at an unprecedented price for Symphony Quality and an extremely competitive price for the market. With industry leading sound quality and scalable, high density I/O configurations for Dante®, Pro Tools® HD and Thunderbolt® systems, the Symphony Connect series is the ideal choice for broadcast, live sound, education, post, house of worship and recording studio facilities.

The Symphony I/O Mk II 8×8 MP and Symphony I/O Mk II 16 MP Connect series audio interfaces deliver Symphony-quality sound with robust, high-performance AD/DA converters and Apogee’s Advanced Step Gain Architecture™ mic preamps at unprecedented prices. Using cutting edge components and a simplified, optimized analog circuit design, Apogee engineers are able to place more AD/DA converters and mic preamps on a single module board. The result is a single Symphony I/O Mk II with up 32 mic preamps at an unprecedented price for Symphony Quality and an extremely competitive price for the market. With industry leading sound quality and scalable, high density I/O configurations for Dante®, Pro Tools® HD and Thunderbolt® systems, the Symphony Connect series is the ideal choice for broadcast, live sound, education, post, house of worship and recording studio facilities.

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 8.8MD provides 8x8 balanced analog audio inputs and outputs. Each input accommodates microphone through line level signals with a gain range of -60 to +24dBu. +48V phantom power is individually switchable on each input. Output levels are configurable up to +24dBu. With DB-25/AES59 terminations.

RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status.

The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller.

Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack.

All units can also be operated in Livewire+ AES67 interoperability mode.