AudioScience - Iyo Dante 0.32L

AudioScience – Iyo Dante 0.32L

Product Information

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 0.32L provides 32 balanced outputs. The output levels are configurable up to +24dBu. With terminal block termination.

RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status.

The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller.

Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack.

All units can also be operated in Livewire+ AES67 interoperability mode.

Media Vision – MV-ALS-STFM-D

This fixed, rack-mountable transmitter delivers the complete feature package for ADA compliant wireless FM listening systems. This fixed, rack-mountable transmitter delivers the complete feature package for ADA compliant wireless FM listening systems. Programming, channel assignments and settings lock, can be done either from the transmitters and receivers with clear OLED display for menu navigation, or from a user-friendly software interface.

Operates on the FCC protected 72-76 MHz FM bandwidth
57 programmable channels with settings lock.
Simultaneous operation of up to 6 channels
Easy integration: balanced and unbalanced inputs, Dante interface
Operating range: up to 1500ft (depending on the antenna).
SNR: 80 dB
Weight: 3.7 lbs.
Dimension: 8.46” X 8.26” X 1.96”
Lifetime warranty

I/O Interfaces

See the product

DiGiCo

DiGiCo – A164D Wall LCD

The A164D Wall LCD is a 16 input 4 output I/O Expander that uses the Dante network protocol to provide fixed, additional I/O anywhere on a network and is designed for wall or floor mounting. It comes with 16 Mic Preamps on XLR inputs with Phantom Power status LEDs and four XLR Line Outs with direct preamp control from the 4REA4 controller software. It can run at both 48K and 96k sample rates and it is AES67 compatible. Primary and secondary Dante ports come with locking EtherCON connectors and can run in both redundant and switched mode. All LCD labels are dimmable and can be customised using Dante controller software.

I/O Interfaces

See the product

Alfatron Electronics

ALF-DAIO-USB

The ALF-DAIO-USB USB to Dante I/O adapter is a complete high-performance Dante device with the automation and ease-of-use features that make Dante the world's most popular audio networking solution. The Dante I/O Adapter is compatible with all Dante interfaces and provides all the features you would expect from a Dante audio network. Each adapter is capable of providing high-fidelity audio reproduction, ultra-low latency, and sample-accurate synchronization across the entire network.

I/O Interfaces

See the product

AudioScience – Iyo Dante 0.32L

Product Information

Similar Products

Media Vision – MV-ALS-STFM-D

DiGiCo – A164D Wall LCD

ALF-DAIO-USB

Support

Company

Dante Networking Alliance

AudioScience – Iyo Dante 0.32L

Product Information

Similar Products

Media Vision – MV-ALS-STFM-D

DiGiCo – A164D Wall LCD

ALF-DAIO-USB

I would like to receive product notices, training and event information and Dante product marketing updates via email. Opt-out at any time. For further details, including about your rights, see our Privacy Policy.