Cart
← Back to Product Catalog

AudioScience – Iyo Dante 0.16LD

I/O Interfaces

More details

Similar Products

AU-X2IPRO-D
  • TiGHT AV

AU-X2IPRO-D

The AU-X2IPRO-D/ AU-X2IPRO-DA from TiGHT AV effortlessly integrates two channels of analog audio into your Dante network. Utilizing Audinate’s original Dante Ultimo chip, the unit supports sample rates up to 96kHz.
    I/O Interfaces
  • Dante Ch: 2x0
  • 24-bit
See the product
AudioScience - Iyo Dante
  • AudioScience

AudioScience – Iyo Dante 32.0M

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 32.0M provides 32 balanced analog audio inputs and 0 outputs. With terminal block connectors.

Each input accommodates microphone through line level signals with a gain range of -60 to +24dBu. +48V phantom power is individually switchable on each input. With Terminal block termination.

RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status.

The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller.

Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack.

All units can also be operated in Livewire+ AES67 interoperability mode.

    I/O Interfaces
  • Dante Ch: 32x0
  • 16-bit, 24-bit, 32-bit
See the product
Nx-Dante-8-Card-30|Nx-Dante-8-Card-30
  • Crest Audio

Crest Audio – NX Dante-8

Two versions of the NexSys Nx-8 Network Audio Interface modules are available supporting Dante and CobraNet steaming audio protocols. Both cards deliver eight (8) channels of streaming audio to Crest Audio networkable power amplifiers.

    I/O Interfaces
See the product