Glensound - AoIP4O

Glensound – AoIP4O

Product Information

The Glensound AoIP4O is packaged in a small & rugged format and designed for outside broadcast, theatre and location applications.

Both the AoIP4O and AoIP4I units are designed to easily and quickly interface existing analogue equipment to a Dante® / AES67 network audio system. Being powered by PoE means that only one cable needs to be connected to the network to carry both audio and power, providing flexibility and saving time on installation.

AoIP4O provides 4 balanced analogue audio Outputs from a Dante®/AES67 audio network.

Robust proven construction techniques, simple reliable interface and excellent specification will help make your technician’s life hassle free, whilst the low cost and long asset life will keep the accountant satisfied.

Specifications

Dante Ch: 4x0
Bit Depth: 24-bit
Sample Rate: 44.1kHz, 48kHz, 88.2kHz, 96kHz
AES67 Enabled

BARE – BE-1616D

The network audio processor is a network audio processor with 32 inputs (16 analog and 16 digital) and 32 outputs (16 analog and 16 digital), using the industry-leading ADI DSP SHARC21489 chip , The highest operating frequency can reach 450MHz. The input and output modules of the DSP can be customized according to the actual situation. At the same time, it has independent AFC, AEC, ANS, AGC, gain sharing automatic mixing, threshold automatic mixing and other processing modules to meet the needs of audio processors and transmissions in various places. Such as meeting rooms, multi-function halls, conference center auditoriums, administrative centers, etc.

I/O Interfaces

See the product

AudioPressBox

AudioPressBox – APB-112 OW-D

The APB-112 OW-D is an active, on wall AudioPressBox unit with 1 channel DANTE input and 12 LINE/Mic outputs. The DANTE-enabled on wall unit features 1 channel DANTE input with high quality digital to analog converter. Powered via PoE from DANTE-network. The unit has 12 balanced, individually transformer isolated Line/MIC outputs. The unit is powered only via PoE from DANTE network. This is a PoE level 3 device

I/O Interfaces

See the product

WorkPro

WorkPro – DD4

DD4 devices are gateways used to convert DANTETM (Digital Audio Network Through Ethernet - developed by AUDINATE) protocol. These devices allow the extraction of analog audio signals from the DANTETM network as well as the introduction of analog channels within the same network. DD4 devices are gateways used to convert DANTETM (Digital Audio Network Through Ethernet - developed by AUDINATE) protocol. These devices allow the extraction of analog audio signals from the DANTETM network as well as the introduction of analog channels within the same network. DD4 is a device designed for use in installation, for which the analog inputs and outputs are made through Euroblock 3.5mm connectors. It has balanced inputs and outputs to provide greater immunity to noise that interferes with audio signal lines.

I/O Interfaces

See the product

Glensound – AoIP4O

Product Information

Specifications

Similar Products

BARE – BE-1616D

AudioPressBox – APB-112 OW-D

WorkPro – DD4

Stay connected to Dante

Support

Company

Dante Networking Alliance