Dante-enabled Product Catalog

D-8 is a desktop microphone base with Dante function. It is suitable for quick installation of any XLRM Cannon head output gooseneck microphone. The microphone base is equipped with a capacitive induction tact switch and is equipped with a red / green LED indicator. . In local mode, the user can switch the microphone to mute or speak. You can set the real-time and mute audio switching between the repetitive switching (latch on / off) between speech and mute; or preset mute and only press the button. Speak at any time (jog to speak), or preset to speak and only mute when pressed (jog to mute). The microphone holder is made of heavy-duty die-casting technology, and a silicone sponge pad is installed at the bottom to reduce the noise caused by table vibration. Inconspicuous design and matte black coating can enhance the concealment when used in serious occasions. The microphone holder is designed for flat placement applications, providing high-quality radio applications such as high-quality radio, conferences, and distance education.

The speaker uses a patented design of a 4-inch bass + 3 0.5-inch tweeter coaxial unit. In terms of sound quality, it not only has the characteristics of high phase fidelity of the full-range speaker, but also realizes the output of a more natural sound in the form of a standard point source. At the same time, it also has the powerful expressive power of the crossover speakers in the high and low frequencies, making its sound level more distinct and the sense of detail more prominent. Three tweeters are arranged in a vertical line to form a linear array pattern, which makes the high-frequency horizontal pointing wider and can take care of more areas. The coaxial unit design can reduce the volume of the speaker as much as possible, and the appearance is more compact and elegant.
The speakers use Dante digital audio interface and POE network power supply to drive the power amplifier module. Only one network cable is needed to supply audio signals and power at the same time. In a digital audio system, our product is a terminal node that provides the terminal playback function of a digital audio system.

The speaker uses a patented design of a 4-inch bass + 3 0.5-inch tweeter coaxial unit. In terms of sound quality, it not only has the characteristics of high phase fidelity of the full-range speaker, but also realizes the output of a more natural sound in the form of a standard point source. At the same time, it also has the powerful expressive power of the crossover speakers in the high and low frequencies, making its sound level more distinct and the sense of detail more prominent. Three tweeters are arranged in a vertical line to form a linear array pattern, which makes the high-frequency horizontal pointing wider and can take care of more areas. The coaxial unit design can reduce the volume of the speaker as much as possible, and the appearance is more compact and elegant.
The speakers use Dante digital audio interface and POE network power supply to drive the power amplifier module. Only one network cable is needed to supply audio signals and power at the same time. In a digital audio system, our product is a terminal node that provides the terminal playback function of a digital audio system.

Features:

• Integration of power over Ethernet and audio data transmission, simplifying cable layout and complying with Ethernet engineering specifications;
• With high efficiency and high sound energy output, excellent sound quality, perfect protection function and good electromagnetic compatibility characteristics.
• ★ The built-in DSP network active speaker can remotely monitor and control the EQ of the active speaker and the voltage and current across the speaker at the PC.
• The sound column is made of wooden box, sandblasted surface treatment, the sound is loud and powerful.
• Automatically assign IP addresses through router DHCP;
• ★ Each receiving channel can be controlled independently and can be applied to any location on the LAN
• With perfect protection function (short circuit protection, over current protection, over and under protection, DC protection, power limit, temperature limit, long-term output power limit, clip limiter).
• ★ The speaker uses Dante digital audio interface and PoE network power supply to drive the power amplifier module. Only one network cable is needed to supply audio signals and power at the same time.

BR-10X6 is a network switching audio processor mainly used for local education and remote interactive education. It is equipped with high-performance digital audio processing technology, including full-band adaptive echo cancellation, automatic noise suppression, and feedback suppression algorithms. Tone microphone, easy installation, simple operation, comes with 6 network ports, supports PoE, 10 / 100M adaptive, 100 meters transmission distance, IEEE802.3at, single port maximum power 30W, 12/36 power supply. Easily meet the high-quality voice needs of local sound reinforcement, recording and broadcasting and remote interactive education.

● Built-in echo cancellation, feedback suppression, and noise algorithms
use a stable two-way simultaneous talk (Double Talk) detection method, which can effectively eliminate redundant echoes even in strong background noise and nonlinear distortion environments; noise suppression algorithms can track quickly and accurately Ambient noise changes and maintains good output sound quality.
● Two-channel MIC input
Provide two microphone interfaces, support gain adjustment, 48V phantom power supply. Increase the flexibility of users to meet the needs of users.
● Two-channel remote audio input
Provides two linear input interfaces, which are usually used to access remote signals during interactive and distance teaching, that is, reference signal adaptive echo cancellation.
● Two-channel local linear input
Provides two linear input interfaces, usually connected to local audio sources, such as DVD, laptop, etc.
● Four-channel Dante network audio input
Provides four Dante network audio inputs through a network connection, which can be connected to any Dante audio in the network .
● Two-channel SPK signal main output
Provides two linear output interfaces. All input signals are processed and mixed for output, which is usually used for external power amplifiers or active speakers.
● Two-channel AEC signal output
Provides two linear AEC signal output interfaces, which are usually output to interactive and distance teaching equipment. Full-band adaptive echo cancellation.
● Two-channel LINE signal output
Provides two linear output interfaces to automatically suppress the noise of two MIC input signals, and simultaneously mixes two LINE signals and two Dante signals for common output.
● Four-channel Dante signal output
Provides four Dante signal mixed outputs, which can be transmitted to any Dante device through the network to achieve IP management and interconnection.
● Six plus one network connection port
Provides six network switch ports, supports PoE power supply, 10 / 100M adaptive, single port maximum power 30W, and provides four-way Dante signal. One network link port for connecting other network switches.
● Plug and play, easy to operate
Pre-set scenes can be opened with one click, plug and play, strong versatility, flexible and convenient deployment, greatly reducing the difficulty and cost of engineering wiring.

The speaker uses a patented design of a 6.5-inch bass + 1 1-inch tweeter coaxial unit. In terms of sound quality, it not only has the characteristics of high phase fidelity of the full-range speaker, but also realizes the output of a more natural sound in the form of a standard point source. At the same time, it also has the powerful expressive power of the crossover speakers in the high and low frequencies, making its sound level more distinct and the sense of detail more prominent. The coaxial unit design can reduce the volume of the speaker as much as possible, and the appearance is more compact and elegant.

    The speakers use the Dante network audio interface and PoE network power supply to drive the power amplifier module. Only one network cable is needed to supply audio signals and power at the same time. Provides the terminal playback function of the digital audio system. Suitable for primary and secondary classrooms, small and medium conference rooms, corridor broadcasting and other places.

The BARE AF-D Series contains five models; AF-6D, AF-8D, AF-10D, AF-12D, AF-15D

AF-D series network active speaker is an active full-range speaker that integrates network transmission, pure digital power amplifier and RS-232 control and monitoring. With high efficiency and high sound energy output, excellent sound quality, perfect protection function and good electromagnetic compatibility characteristics. It has a backup analog input interface and a Dante network interface, and the transmission is dual-backup. A built-in Dante board can be connected through a network cable to implement network audio signal transmission. The router automatically assigns an IP address through the DHCP of the router, and performs signal transmission with the audio matrix with Dante function in the local area network, and can easily set up a fully digital network sound reinforcement system.

The speaker uses a patented design of a 6.5-inch bass + 1 1-inch tweeter coaxial unit. In terms of sound quality, it not only has the characteristics of high phase fidelity of the full-range speaker, but also realizes the output of a more natural sound in the form of a standard point source. At the same time, it also has the powerful expressive power of the crossover speakers in the high and low frequencies, making its sound level more distinct and the sense of detail more prominent. The coaxial unit design can reduce the volume of the speaker as much as possible, and the appearance is more compact and elegant.

    The speakers use the Dante network audio interface and PoE network power supply to drive the power amplifier module. Only one network cable is needed to supply audio signals and power at the same time. Provides the terminal playback function of the digital audio system. Suitable for primary and secondary classrooms, small and medium conference rooms, corridor broadcasting and other places.

DAM-808 is a digital automatic mixer based on digital signal processing technology with 8 MIC / LINE inputs and 4 outputs. Can work in automatic mixing mode or ordinary manual mixing mode. It adopts all-digital method to realize automatic mixing, and uses digital signal processing technology to adjust and compensate the audio signal. At the same time, because the device has a built-in microprocessor and has an RS232 control interface, it is very convenient to connect with various central control devices. AM816 automatic mixer has high intelligence, strong signal processing function, friendly control interface, very simple to use, and can be used in teaching, conferences, churches, entertainment programs and other occasions.

• 24bitA / D, D / A converter, 44.1kHz sampling frequency
• 8 balanced inputs, switchable to LINE / PHM / MIC (line / MIC phantom power / MIC no phantom power) three input methods, EURBLOCK terminal
• 4 line balanced outputs, EURBLOCK terminal,
• Equipped with 4 Dante outputs
• 8 input channels each have 3 segments of parametric equalization, signal level meter and other processing modules
• Built-in 8 × 4 output mixer, the mix ratio of 8 input signal components in 4 output channels can be adjusted independently
• Manual and automatic mixing modes
• When mixing manually, each input signal can be arbitrarily assigned to each output with different proportions
• During automatic mixing, you can set the connected microphones to have only one or two to three microphones on at the same time, and automatically turn off when not talking. In the automatic mixing mode, the system also implements the following functions to ensure the implementation of automatic mixing.
• ▲ FORCE ON and FORCE OFF functions—Forcibly turning MIC on or off
• ▲ VIP setting function-with priority microphone to ensure the orderly conduct of the conference
• ▲ LAST MIC ON function—Keep a MIC on to pick up the background noise of the room
• ▲ NOMA function ～ Automatically adjust the output level of the system according to the number of MICs turned on, which will not increase the output gain of the system due to the superposition of input levels, and effectively suppress the formation of acoustic feedback
•  Multiple sets of factory or user parameter presets
• LCD screen character display, intuitive and concise
• With computer control interface, easy field adjustment
• Basic functions can be set through the panel or running related configuration software
• Input and output signals on the panel are five-segment LED level meters with a range of +6, 0, -10, -20, -40dB, etc.
• Four output channels are designed with 9-band graphic equalization, 24dB / oct roll-off high-pass and low-pass filters, signal compressors and limiters, and output level meters and other processing modules

The network audio power amplifier integrates a four-way digital power amplifier module. Signal processing and power amplification are solved on one motherboard, which shortens the signal path and simplifies engineering wiring.

• Built-in 4 x 600W / 8 Ω ( 800W / 4 Ω) digital power amplifier
• Professional PC- side control software is easy to use, Ethernet TCP / IP online management, can manage every device in the system at the same time
• ★ DANTE network audio technology, low latency without interference, without loss of smooth and full sound quality
• Network dual backup, multiple devices can be connected hand in hand.
• ★ Automatic or manual network IP configuration, can be named independently for easy identification in the network
• Automatic protection memory function in case of power failure

    The network audio power amplifier integrates a two-way digital power amplifier module. Signal processing and power amplification are solved on one motherboard, which shortens the signal path and simplifies engineering wiring.

• Built-in 2x600W / 8Ω (800W / 4Ω) digital power amplifier
• Professional PC-side control software is easy to use, Ethernet TCP / IP online management, can manage every device in the system at the same time
• ★ DANTE network audio technology, low latency without interference, without loss of smooth and full sound quality
• Network dual backup, multiple devices can be connected hand in hand
• ★ Automatic or manual network IP configuration, can be named independently for easy identification in the network
• Automatic protection memory function in case of power failure

The network audio power amplifier integrates a two-way digital power amplifier module. Signal processing and power amplification are solved on one motherboard, which shortens the signal path and simplifies engineering wiring.

Built-in 2x900W / 8Ω (1200W / 4Ω) digital power amplifier
Professional PC-side control software is easy to use, and Ethernet TCP / IP online management can manage each device in the system at the same time.
★ DANTE network audio technology, low latency without interference, without loss of smooth and full sound quality.
Network dual backup, multiple devices can be connected hand in hand.
★ Automatic or manual network IP configuration, can be named independently for easy identification in the network
Automatic protection memory function in case of power failure

The LA-218L compact line array module with built-in amplifier has two high-energy 18-inch ultra-low frequency units with continuous directional coverage. Designed for simple system construction, it can provide the best listening experience in the shortest time. And the entire series is fully integrated with Dante. With the speaker as a system carrier, it has fully integrated the functions of signal transmission, processing, power amplification and remote monitoring. It has abandoned a large number of physical equipment such as power amplifiers and peripheral processing equipment, and has realized network transmission, IT processing, and intelligent operation.

The digitally guided full-frequency sound column adopts a multi-channel high-current digital power amplifier with advanced dedicated coaxial transducers, and each transducer is equipped with a high-frequency array of three tweeters. "Array in an array" three tweeter designs shorten the distance between high-frequency sources, thereby greatly improving high-frequency performance through a continuous and wide horizontal distribution.

As long as it is simple and directly connected to the network, multi-channel digital audio transmission, user-controlled DSP, user-selectable presets, and comprehensive remote system management control can be achieved , and all use standard Ethernet hardware and cables.

With computer remote control, audio system technicians can make settings that cover almost all audience areas. Multiple beams can be set one by one, and a software-controlled DSP is designed to separate them from a single array: up to 4 beams. The acoustic center of the array can also be raised or lowered because all array elements are identical and equidistant. Suitable for large lecture halls, stadiums, theaters, etc.

TX-D is a network media matrix mainly used for local conferences, education, and remote interactive education. It is equipped with high-performance digital audio processing technology and eight-channel audio processing, including full-band adaptive echo cancellation, automatic noise suppression, and feedback suppression algorithms. With long-distance pickup microphone, it is easy to install and easy to operate. It comes with 6 + 1 network ports, supports PoE , 100 / 1000M adaptive, 100 meters transmission distance, supports IEEE802.3af / at standard, single port maximum power 60W . Easily meet the high-demand needs of local sound reinforcement, recording and broadcasting and remote interactive education.

The PE-66 digital network flat panel speaker has a built-in PoE active audio power module. It follows the latest PoE technology standards and uses the international mainstream mainstream high-performance digital media DANTE network to achieve excellent sound, simple wiring, flexible use, simple maintenance, and easy management , Economic and energy saving features, through a network cable to achieve distributed power supply, audio signal transmission, integrated control and other functions. This product is suitable for indoor, corridor wall hanging, customized features, conference rooms with 60 * 60 ceilings and other places.

BR-102D is a Dante interface with 12 microphone inputs . It is ideal for adding microphone inputs to Dante systems. The BR-102D can be installed near the sound source to minimize analog wiring that is prone to interference. Dante connection simplifies the system's infrastructure wiring. Each BR-102D unit can be connected to a network switch using a category 5 network cable. All adjustable parameters of BR-102D can be controlled by dante controller software. The BR-102D has 12 balanced microphone inputs. Each microphone input comes with a 48v phantom power switch that can independently switch phantom power. Each channel independently displays the channel level, and has an independent switch to adjust the input microphone volume. The front panel has indicators to show the power and network status for easy troubleshooting.

WTX-D is a network media matrix mainly used for local conferences, education and remote interactive education. It is equipped with high-performance digital audio processing technology, eight-channel audio processing, including full-band adaptive echo cancellation, automatic noise suppression, Feedback suppression algorithm, with wireless microphone pickup, compact pen-shaped microphone, automatic frequency comparison at startup, simple operation; comes with 6 + 1 network ports, supports PoE, 100 / 1000M adaptive, 100 meters transmission distance, supports IEEE802.3af / at standard, single port maximum power 60W. Easily meet the high-quality voice needs of local sound reinforcement, recording and broadcasting and remote interactive education.

The speaker uses a patented design of a 4-inch bass + 3 0.5-inch tweeter coaxial unit. In terms of sound quality, it not only has the characteristics of high phase fidelity of the full-range speaker, but also realizes the output of a more natural sound in the form of a standard point source. At the same time, it also has the powerful expressive power of the crossover speakers in the high and low frequencies, making its sound level more distinct and the sense of detail more prominent. Three tweeters are arranged in a vertical line to form a linear array pattern, which makes the high-frequency horizontal pointing wider and can take care of more areas. The coaxial unit design can reduce the volume of the speaker as much as possible, and the appearance is more compact and elegant.

The speakers use Dante digital audio interface and POE network power supply to drive the power amplifier module. Only one network cable is needed to supply audio signals and power at the same time. In a digital audio system, our product is a terminal node that provides the terminal playback function of a digital audio system.

Features
1. Advanced modular design, four groups of receiving modules, each group has a built-in independent CPU processing system to complete audio processing and transmission.
2. Ultra-high-bandwidth UHF 600MHZ-700MHZ, suitable for occasions that require a large number of microphones, making it easy to form a wireless conference microphone system.
3. Superb reception, overcome long distance and complicated field environments.
4. Use Ethernet cable to connect directly to the network-no need to add and solder audio cables.
5. Can control Dante routing and settings through a computer
6. The entire scalable Dante system has 512 two-way audio channels
7. Both the network volume and the receiver volume can be adjusted separately.
Technical parameters:
IF frequency: first IF: 110MHz, second IF 10.7MHz
wireless interface: BNC / 50 ohm
sensitivity: 12 dB (80dBS / N )
Sensitivity adjustment range: 12-32 dB
spurious suppression: ≥75dB
Maximum output intensity: +10 dBV
Frequency range: 600-700MHz
Modulation mode: FM
adjustable range: 50MHz
Number of channels: 100 or 200)
Channel interval: 250 KHz
frequency stability: within ± 0.005%
dynamic range: 100dB
maximum frequency deviation: ± 45KHz
audio response: 80Hz-18KHz (3dB)
comprehensive signal-to-noise ratio:> 105dB
Comprehensive distortion: ≤0.5%
Working temperature: -10 ℃ ~ + 40 ℃

The speaker uses a patented design of a 4-inch bass + 3 0.5-inch tweeter coaxial unit. In terms of sound quality, it not only has the characteristics of high phase fidelity of the full-range speaker, but also realizes the output of a more natural sound in the form of a standard point source. At the same time, it also has the powerful expressive power of the crossover speakers in the high and low frequencies, making its sound level more distinct and the sense of detail more prominent. Three tweeters are arranged in a vertical line to form a linear array pattern, which makes the high-frequency horizontal pointing wider and can take care of more areas. The coaxial unit design can reduce the volume of the speaker as much as possible, and the appearance is more compact and elegant.

The speakers use Dante digital audio interface and POE network power supply to drive the power amplifier module. Only one network cable is needed to supply audio signals and power at the same time. In a digital audio system, our product is a terminal node that provides the terminal playback function of a digital audio system.

 BR-1016 network audio processor is an audio processing and control system that can be freely designed. It uses advanced DSP processing technology and has a new algorithm of automatic mixing and feedback cancellation, which can solve various practical problems in application scenarios. Since most of the controls are operated by software, the appearance is more concise and lively. The operator only needs to click the mouse lightly, instead of adjusting complex large-scale mixers on the spot to complete the function conversion as before, which greatly simplifies the operation.

BR-102D is a Dante interface with 12 microphone inputs . It is ideal for adding microphone inputs to Dante systems. The BR-102D can be installed near the sound source to minimize analog wiring that is prone to interference. Dante connection simplifies the system's infrastructure wiring. Each BR-102D unit can be connected to a network switch using a category 5 network cable. All adjustable parameters of BR-102D can be controlled by dante controller software. The BR-102D has 12 balanced microphones inputs. Each microphone input comes with a 48v phantom power switch that can independently switch phantom power. Each channel independently displays the channel level, and has an independent switch to adjust the input microphone volume. The front panel has indicators to show the power and network status for easy troubleshooting.

The BR-106S network audio processor is an audio processing and control system that can be freely designed. It uses advanced DSP processing technology and has a new algorithm of automatic mixing and feedback cancellation, which can solve various practical problems in application scenarios. Since most of the controls are operated by software, the appearance is more concise and lively. The operator only needs to click the mouse lightly, instead of adjusting complex large-scale mixers on the spot to complete the function conversion as before, which greatly simplifies the operation.

BR-102S network audio processor is an audio processing and control system that can be freely designed. It uses advanced DSP processing technology and has a new algorithm of automatic mixing and feedback cancellation, which can solve various practical problems in application scenarios. Since most of the controls are operated by software, the appearance is more concise and lively. The operator only needs to click the mouse lightly, instead of adjusting complex large-scale mixers on the spot to complete the function conversion as before, which greatly simplifies the operation.

The BR-108S network audio processor is an audio processing and control system that can be freely designed. It uses advanced DSP processing technology and has a new algorithm of automatic mixing and feedback cancellation, which can solve various practical problems in application scenarios. Since most of the controls are operated by software, the appearance is more concise and lively. The operator only needs to click the mouse lightly, instead of adjusting complex large-scale mixers on the spot to complete the function conversion as before, which greatly simplifies the operation.

   BR-104S digital audio processor is an audio processing and control system that can be freely designed. It uses advanced DSP processing technology and has a new algorithm of automatic mixing and feedback cancellation, which can solve various practical problems in application scenarios. Since most of the controls are operated by software, the appearance is more concise and lively. The operator only needs to click the mouse lightly, instead of adjusting complex large-scale mixers on the spot to complete the function conversion as before, which greatly simplifies the operation.