BARE - BR-1016

BARE – BR-1016

Product Information

BR-1016 network audio processor is an audio processing and control system that can be freely designed. It uses advanced DSP processing technology and has a new algorithm of automatic mixing and feedback cancellation, which can solve various practical problems in application scenarios. Since most of the controls are operated by software, the appearance is more concise and lively. The operator only needs to click the mouse lightly, instead of adjusting complex large-scale mixers on the spot to complete the function conversion as before, which greatly simplifies the operation.

Bosch – ARNI-S

Bosch's OMN-ARNIS ARNI-S is an OMNEO interface that provides better scalability through the use of either a DHCP server or DNS server, which extends the use of PTP over multiple subnets. The ARNI-S supports redundancy, and up to 450 OMNEO nodes in a single subnet network, or up to 450 OMNEO nodes in each subnet of a routed network when used in conjunction with an ARNI-E device.

I/O Interfaces

Dante Ch: 0x0

See the product

BARE

BARE – PE-66

Features： 1. Easy to install, low cost, less noise; 2. No need to cut the ceiling panel or insert the bottom box on the back, directly replace the original gypsum board 3.60X60 flat panel design, can be personalized inkjet pattern 4. With 360° sound field coverage, it can emit high-fidelity and clear sound; 5. It has high efficiency and high sound energy output, excellent sound quality, perfect protection function and good electromagnetic compatibility characteristics; 6. The integration of power over Ethernet and audio data transmission realizes simplified cable layout and conforms to Ethernet engineering specifications. 7. Automatically assign IP address through router DHCP; 8. It can independently control each receiving channel, and can be applied to any location in the local area network 9. It has perfect protection functions (short circuit protection, over current protection, over and under protection, DC protection, power limit, temperature limit, long-term output power limit, clipping limiter). 10. The speaker uses Dante digital audio interface and PoE network power supply to drive the power amplifier module, and only one network cable is needed to realize the simultaneous supply of audio signal and power.

I/O Interfaces

Dante Ch: 1x0

See the product

BARE

BARE – BR-201L

Product Description： 1. Use RJ45 network cable to connect in a "hand in hand" way; 2. Each connection box can connect 4 speaking units; 3. Use professional plugs to connect between the unit and the connection box 4. Hand in hand to connect to a box or directly connect to the conference host through the RJ45 network port interface; 5. The power supply is supplied by the host

I/O Interfaces

See the product

BARE – BR-1016

Product Information

Similar Products

Bosch – ARNI-S

BARE – PE-66

BARE – BR-201L

Stay connected to Dante

Support

Company

Dante Networking Alliance