ASL – Enchorus ENC 1202


More details

Similar Products

amphenol-amphe-dante-RJD1112-0500_600px|amphenol-amphe-dante-RJD1112-0500_600px
  • Amphenol

Amphenol – Amphe-Dante RJD1112-0050

Amphe-Dante are Dante® audio to analogue audio adapters, with one RJ45 Dante input, and one AX series XLR analogue outputs in a molded housing. Amphe-Dante are Dante® audio to analogue audio adapters, with one RJ45 Dante input, and one AX series XLR analogue outputs in a molded housing. Amphe-Dante products enable simple connection of analogue equipment to a Dante network and can receive audio channels from a Dante network and provide studio-quality, low-latency audio via an XLR connector to analogue audio equipment. Any audio available on the Dante network can be routed via the XLR outputs to an amplifier, powered speaker, mixing console, digital signal processor (DSP), or other analogue audio device.
    I/O Interfaces
  • Dante Ch: 1x0
  • 24-bit
ktdn30
  • Klark Teknik

Klark Teknik – DN 30T

The new DN 30T, a compact Audinate Dante audio transmitter for connecting mic/instrument or line level sources to a Dante network. The DN 30T can be connected to any Dante receiver via a standard CAT5e or CAT6 cable. This same connection can be used to power the device through Power over Ethernet (PoE) or via a 24-volt DC input. The DN 30T has stated 96 kHz analog to digital conversion. Balanced or unbalanced 1/4-inch, RCA or stereo 1/8-inch cables are available for connecting to either a smartphone, tablet, microphone or instrument. Input levels can also be adjusted via the level knob. The compact DN 30T is encased in a thick aluminum extrusion housing to protect the electronics. The enclosure also has rubber corner bumpers. Floor and wall mount brackets are included for fixed installation applications.
    I/O Interfaces
audiopressbox0APB-112_SB-D_0
  • AudioPressBox

AudioPressBox – APB-112 SB-D

The APB-112 SB-D is an active, portable, AudioPressBox unit, 1 channel DANTE input, 12 LINE/Mic outputs.

  • The portable DANTE-enabled unit features 1 channel DANTE input with high quality digital to analog converter.
  • Powered via PoE from DANTE-network.
  • The unit has 12 balanced, individually transformer isolated Line/MIC outputs.
  • The unit is powered only via PoE from DANTE network.
  • This is a PoE level 3 device
    I/O Interfaces