Cart
← Back to Product Catalog

BARE – BR-102S

I/O Interfaces

More details

Similar Products

avn-aio8r-iso-square
  • Sonifex

Sonifex – AVN-AIO8R 8 Input, 8 Output, Dual Dante® Interface, PoE

The AVN-AIO8R audio converter and interface converts up to eight analogue inputs and eight analogue outputs to and from the Dante Audio-over-IP networking standard. Dual Ethernet ports allow the unit to operate in redundant mode, ensuring audio routing is maintained in the event of loss of link on either of the network connections.

This cost effective 1U rack-mount unit offers an easy solution for AV professionals and system integrators. It is simple to configure and operate, with all set-up, except line-up levels, done via the standard Dante Controller software and power via PoE (Power Over Ethernet).

All analogue inputs and outputs are on high-quality Neutrik XLR connectors and there are front panel status/confidence LEDs for PoE, Link, and Clock. Global 0dBFS line-up can be set to +12dBu, +18dBu or +24dBu to meet your specific requirement via the front panel recessed toggle switch.

    I/O Interfaces
See the product
hugel-pru
  • Hugel

Hugel – PRU

The PRU basically serves as a audio router with up to 4 interfaces with 64 channels each in a 19"/1RU case. Every single input can be routed to one or many outputs using the EmBER+ interface. For each of the 4 interfaces the protocol can be chosen to be either Dante (Audinate's Brooklyn II) or SMPTE-2110 (Ross Video's Liberty). The built-in sample rate converters allow therefore up to 4 independently synchonized clock domains to be connected to the PRU. Using two of each module type, a 128-channel bridge between Dante and SMPTE-2110 can be formed. Optionally PRU can be extended by a central intercom matrix. The 256x256 matrix is fully equipped with summing and level adjusting features.

    I/O Interfaces
See the product
rdl-sf-nd2|rdl-sf-nd2
  • RDL

RDL – SF-ND2

The SF-ND2 is a digital audio interface that converts two Dante network audio channels to a stereo digital audio output. The SF-ND2 is a digital audio interface that converts two Dante network audio channels to a stereo digital audio output. The output is switch-selectable to provide an AES/EBU on XLR, or coaxial and optical S/PDIF. The switch enables the appropriate output jack and any required electrical and data format conversion. Special software is not required to configure the module. The SF-ND2 is a professional grade product for studio quality performance. The SF-ND2 is PoE powered. Valid PoE power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit. The SF-ND2 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured SYSFLEX product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. The versatility of SYSFLEX products adds enormous flexibility in the design and installation of professional A/V systems. Features:
  • Converts Two Dante Network Audio Signals to Left/Right Digital Audio
  • AES/EBU or S/PDIF Coaxial or Optical Output
  • Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
  • Digital Audio Output Sample Rate Equals Dante Sample Rate
  • Transformer-Isolated AES/EBU Output
  • Dante Audio Signals Remain in the Digital Domain through the Output
  • Special Software Not Required for Module Setup
  • LED Indicator for Valid Power and Network Sync
  • Operation from PoE Power (Class 0, IEEE 802.3af)
  • Equipped for SysFlex™ Rack Mounting or Surface Mounting
    I/O Interfaces
See the product