Dante-enabled Product Catalog

The Aimline ALX48 Dante is a digital steerable active Column-Speaker with DANTE®-Input. The Aimline ALX48 Dante is a digital steerable active Column-Speaker with DANTE®-Input. Main features

• DANTE ® -in- and out
• 4”-chassis with fiberglass-membrane
• Strong SPL
• Analogue and AES/EBU inputs
• 10 Band parametric EQ with IIR filter
• FIR filter import
• Networking over IP-protocol
• 24 internal presets
• Preset switch with UDP commands

ALSUB 8A is a powerful subwoofer with integrated 4 x 500 Watt digital amplifier, DSP with flexible input routing and a high efficient 8” chassis. ALSUB 8A is a powerful subwoofer with integrated 4 x 500 Watt digital amplifier, DSP with flexible input routing and a high efficient 8” chassis. Main features

• DANTE®-in- and out
• 8”-chassis
• Strong SPL
• Analogue and AES/EBU inputs
• 10 Band parametric EQ with IIR filter
• FIR filter import
• Networking over IP-protocol
• 24 internal presets
• Preset switch with UDP commands

ALSUB 12A is a powerful subwoofer with integrated 4 x 500 Watt digital amplifier, DSP with flexible input routing and a high efficient 12” chassis. ALSUB 12A is a powerful subwoofer with integrated 4 x 500 Watt digital amplifier, DSP with flexible input routing and a high efficient 12” chassis. Main features

• DANTE®-in- and out
• 12”-chassis
• Strong SPL
• Analogue and AES/EBU inputs
• 10 Band parametric EQ with IIR filter
• FIR filter import
• Networking over IP-protocol
• 24 internal presets
• Preset switch with UDP commands

ALSUB 15A is a powerful subwoofer with integrated 4 x 500 Watt digital amplifier, DSP with flexible input routing and a high efficient 15” chassis. ALSUB 15A is a powerful subwoofer with integrated 4 x 500 Watt digital amplifier, DSP with flexible input routing and a high efficient 15” chassis. Main features

• DANTE®-in- and out
• 15”-chassis
• Strong SPL
• Analogue and AES/EBU inputs
• 10 Band parametric EQ with IIR filter
• FIR filter import
• Networking over IP-protocol
• 24 internal presets
• Preset switch with UDP commands

The AMK DT61-A loudspeaker is powered by a POE+ network amplifier with Dante™ input.  It is a 2x2 lay in grille speaker system for easy ceiling tile installation. No external power supply is required. The AMK DT61-A loudspeaker is powered by a POE+ network amplifier with Dante™ input.  It is a 2x2 lay in grille speaker system for easy ceiling tile installation. No external power supply is required. The speaker system has a Class D amplifier which provides efficient use of power.  The assembly comes with AMK's CX 602, highly efficient coaxial loudspeaker.  This system will solve the issue of having to provide a separate amplifier or I/O interface for speaker installations. The speaker is powered by PoE+ network switch. The CX602 loudspeaker driver has excellent dispersion, wide bandwidth and a smooth frequency response which makes this the top choice for all applications. This assembly can be used in wide range of projects for paging and background music applications.  The DT61-A is ideal for hotels, education, hospitals, retail stores, performing art centers, restaurants, airports, houses of worship, and board rooms.  The end users will appreciate both the sound and visual quality of these speakers.

Digimedia HPA Pro is a 2 channel Dante™ interface with analog headphone output.On board is a high quality DAC from TI/Burr Brown with typical S/N 114dB and a high class amplifier with up to S/N 120dB. There is Dante Domain Manager and AES67 support build in. Digimedia HPA Pro is a 2 channel Dante™ interface with analog headphone output.On board is a high quality DAC from TI/Burr Brown with typical S/N 114dB and a high class amplifier with up to S/N 120dB. There is Dante Domain Manager and AES67 support build in.

Digimedia AMP Pro is a 2 channel Dante™ interface with analog amplifier output and PoE (Power over Ethernet) on board. There is Dante Domain Manager and AES67 support build in. Audio output power depends on PoE and can go up to 20W. Digimedia AMP Pro is a 2 channel Dante™ interface with analog amplifier output and PoE (Power over Ethernet) on board. There is Dante Domain Manager and AES67 support build in. Audio output power depends on PoE and can go up to 20W.

Digimedia HPA Rotary Pro is a 2 channel Dante™ interface with analog headphone output.On board is a high quality DAC from TI/Burr Brown with typical S/N 114dB and a high class amplifier with up to S/N 120dB. There is Dante Domain Manager and AES67 support build in. Digimedia HPA Rotary Pro is a 2 channel Dante™ interface with analog headphone output.On board is a high quality DAC from TI/Burr Brown with typical S/N 114dB and a high class amplifier with up to S/N 120dB. There is Dante Domain Manager and AES67 support build in.

Digimedia DAC XLR Pro is a 2 channel Dante™ interface with analog output.On board is a high quality DAC from TI/Burr Brown with typical S/N 114dB. There is Dante Domain Manager and AES67 support build in. Digimedia DAC XLR Pro is a 2 channel Dante™ interface with analog output.On board is a high quality DAC from TI/Burr Brown with typical S/N 114dB. There is Dante Domain Manager and AES67 support build in.

Digimedia DIO XLR Pro is a 2 channel Dante™ interface with digital AES-3 input and output. Input has SRC. There is Dante Domain Manager and AES67 support build in. Digimedia DIO XLR Pro is a 2 channel Dante™ interface with digital AES-3 input and output. Input has SRC. There is Dante Domain Manager and AES67 support build in.

Digimedia DAC RCA Pro is a 2 channel Dante™ interface with analog output.On board is a high quality DAC from TI/Burr Brown with typical S/N 114dB. There is Dante Domain Manager and AES67 support build in. Digimedia DAC RCA Pro is a 2 channel Dante™ interface with analog output.On board is a high quality DAC from TI/Burr Brown with typical S/N 114dB. There is Dante Domain Manager and AES67 support build in.

Digimedia DIO RCA TOS Pro is a 2 channel Dante™ interface with digital SPDIF input and output. Input has SRC and is specially designed to connect CD and DVD players, satellite and digital radio tuners and DJ-consoles to Dante™ network. There is Dante Domain Manager and AES67 support build in. Digimedia DIO RCA TOS Pro is a 2 channel Dante™ interface with digital SPDIF input and output. Input has SRC and is specially designed to connect CD and DVD players, satellite and digital radio tuners and DJ-consoles to Dante™ network. There is Dante Domain Manager and AES67 support build in.

The NBB-04R Networked Audio Receiver receives 4 channels of analog audio and converts them into Dante networked audio stream which in turn can be received by other Dante-enabled devices. It comes with two RJ-45 Ethernet ports and phantom power support, and can be powered by either PoE or 48V external power adapter. The NBB-04R Networked Audio Receiver receives 4 channels of analog audio and converts them into Dante networked audio stream which in turn can be received by other Dante-enabled devices. It comes with two RJ-45 Ethernet ports and phantom power support, and can be powered by either PoE or 48V external power adapter.

• Dante-enabled networked Audio Receiver
• Streaming audio in robust standard Ethernet cable (a.k.a., Digital Snake)
• Easily organize and expand network topology with Ethernet switches
• Uncompressed 24-bit PCM coding with sample rate up to 96KHz
• Two RJ-45 ports make Daisy-chain cascading feasible
• Powered by either PoE or 48V adapter
• Gain or Attenuate control for each channel
• Phantom power engagement control per channel
• A signal clip indicator for all inputs
• XLR Combo sockets for both XLR and phone plugging
• Routing and other configuration are set with Dante Controller software

The NBB-04T Networked Audio Transmitter transmits 4 channels of analog audio converted from Dante networked audio stream which is distributed from other Dante-enabled devices. It comes with two RJ-45 Ethernet ports and can be powered by either PoE or 48V external power adapter. The NBB-04T Networked Audio Transmitter transmits 4 channels of analog audio converted from Dante networked audio stream which is distributed from other Dante-enabled devices. It comes with two RJ-45 Ethernet ports and can be powered by either PoE or 48V external power adapter.

• Dante-enabled networked Audio Transmitter
• Streaming audio in robust standard Ethernet cable (a.k.a., Digital Snake)
• Easily organize and expand network topology with Ethernet switches
• Uncompressed 24-bit PCM coding with sample rate up to 96KHz
• Two RJ-45 ports make Daisy-chain cascading feasible
• Powered by either PoE or 48V adapter
• Attenuate control for each channel
• Routing and other configuration are set with Dante Controller software

DCN-2288R wireless microphone conference system support different meeting modes, like, Limit (1/2/3/4), FIFO (1/2/3/4) and Chairman Only. DCN-2288R wireless microphone conference system support different meeting modes, like, Limit (1/2/3/4), FIFO (1/2/3/4) and Chairman Only. Single audio receiver allows messages’ receiving from one thousand microphones simultaneously, and when linked with central processor, video tracking for 256 microphones could be realized. Meanwhile, five microphones could be activated at the same time. Signal’s transmission could be realized with FM (frequency modulation), featuring high fidelity, high signal-to-noise ratio, and low latency. Unique state-of-art condenser microphone cartridge is introduced, which is resistant to whistle, highly sensitive, allowing excellent audio transmission effect. Wireless transmission is introduced for both audio channel and control channel with no need for extra cable routing. Besides, the system could be installed anywhere as soon as there is a signal coverage, so conference room’s displaying is more convenient. The system features ultra-low power, so continuous speaking for more than eight hours or more than thirty hours stand-by is supportable. AA battery and original lithium battery provided by our company are all supportable. Meanwhile, coupled charging case is designed with intelligent power management integrated circuit, so the battery could be well protected for prolonged service life and safe us. Built-in USB is installed on its audio receiver, allowing both the audio recording and playing function. Besides, when used together with a Bluetooth device, the audios inside the device could also be played with our system. Built-in Dante audio transmission interface is installed. The system allows an average working distance of 60m, but 80m is also possible. 

The conference system is composed by a DCN-6600 unit and two kinds of microphones, including one for representatives and one for chairman. With latest technology, our HTDZ digital conference system is managed to integrate discussion, voting, simultaneous interpreting (SI), registering, video tracking and software management together, so it could be installed on varied conference rooms, from the smallest up to the very largest ones. The conference system is composed by a DCN-6600 unit and two kinds of microphones, including one for representatives and one for chairman. Both these two kinds of microphones have built-in speaker and directional cardioid microphone with light ring, allowing excellent audio sensitivity and wide frequency response. Meanwhile, since the routing for the system is quite easy, a fast and correct installation could be guaranteed. As many as 64 microphones could be installed on our conference system. The conference system has four independent lines, each of them allowing an installation of 30 microphones. When installing HT-08EX, 60 microphones could be installed on the system (six network interfaces). And as many as 30 microphones are allowed to be installed on a single interface.

The conference system is composed by a DCN-7300 unit and two kinds of microphones, including one for representatives and one for chairman. With latest technology, our HTDZ digital conference system is managed to integrate discussion, voting, simultaneous interpreting (SI), registering, video tracking and software management together, so it could be installed on varied conference rooms, from the smallest up to the very largest ones. The conference system is composed by a DCN-7300 unit and two kinds of microphones, including one for representatives and one for chairman. Both these two kinds of microphones have built-in speaker and directional cardioid microphone with light ring, allowing excellent audio sensitivity and wide frequency response. Meanwhile, since the routing for the system is quite easy, a fast and correct installation could be guaranteed. As many as 64 microphones could be installed on our conference system. The conference system has four independent lines, each of them allowing an installation of 30 microphones. When installing HT-08EX, 60 microphones could be installed on the system (six network interfaces). And as many as 30 microphones are allowed to be installed on a single interface.

Powerful and flexible, the HT-9500M fully digital conference system allows both medium and large-scale meetings to be managed with complete control and reliability.  Powerful and flexible, the HT-9500M fully digital conference system allows both medium and large-scale meetings to be managed with complete control and reliability. The conference system combines PC control, software package, and digital processing unit in one integrated system, whose central controller is designed digitally. A comprehensive powerful options, like, the management of multi-mode microphone, video tracking, video switching, recording, monitoring and etc. are displayed clearly on the menu, so operator could find the required function promptly and correctly. Besides, the conference controlling is done by a management software, which could work well on independent windows PC when Ethernet cables are adopted.

Get the most pristine sound quality possible—and extensive monitoring and routing capabilities—in the most versatile audio interface available for Pro Tools | HDX, HD Native, and other pro audio applications.  Get the most pristine sound quality possible—and extensive monitoring and routing capabilities—in the most versatile audio interface available for Pro Tools | HDX, HD Native, and other pro audio applications. With Pro Tools | MTRX, you gain the superior sonic quality of DAD’s legendary AD/DA converters, plus flexible routing and monitor control when used standalone or with Avid Pro Mixing surfaces. And because the interface can be customized with the analog and digital I/O you need, you can take on the most demanding music and post-production challenges. Effortlessly.

Add up to 64 channels of low-latency digital audio using Dante (64 channels at 44.1 kHz or 16 channels at 192 kHz). Add up to 64 channels of low-latency digital audio using Dante (64 channels at 44.1 kHz or 16 channels at 192 kHz).

The AV-WALL-DT4i Dante Mic/Line Interface is a cost-effective wall box in an incredible small size of less than 45x45mm, designed to fit into a single-gang junction box (European format). It offers 2 XLR Mic inputs with 64dB gain and a line-in stereo mini Jack with 40dB gain. Gain can be controlled remotely (network) or locally (rotary button). The AV-WALL-DT4i Dante Mic/Line Interface is a cost-effective wall box in an incredible small size of less than 45x45mm. The AV-WALL-DT4i offers 64dB of true preamp gain on 2 professional XLR Mic inputs and 40dB of gain at line level on a stereo mini Jack connector. Gain can be controlled remotely via network or locally via direct rotary push button. Internal connector allows for link with optional Bluetooth extension Wall-Plate. The AV-WALL-DT4i is designed to fit into a single-gang junction box of only 45x45mm fitting small European format. AV-WALL-DT4i is PoE enabled and thus power, control and audio data connectivity is provided by a single CAT‐5e/6 cable. The size of the main box is 44.6 x 44.6 x 50 mm. It is compatible with “Mosaic” plate of Legrand®. The depth can be adjusted between 26 to 43 mm to fit near any wall depths. Wall plate size may vary depending of the region.

Specifically designed for Devialet’s revolutionary Phantom speaker and offering seamless integration, this Ethernet to Optical Adapter leverages the power of Dante-based networks, enabling professionals to build simple, robust and fully configurable custom installations for their customers. Specifically designed for Devialet’s revolutionary Phantom speaker and offering seamless integration, this Ethernet to Optical Adapter leverages the power of Dante-based networks, enabling professionals to build simple, robust and fully configurable custom installations for their customers.

The Extron AXI 02 AT is a compact audio interface that extracts two channels from a Dante® audio network. The Extron AXI 02 AT is a compact audio interface that extracts two channels from a Dante® audio network. This Dante Audio Interface provides two channels of audio output from the network to devices without Dante connectivity. It features two line level analog outputs on captive screw connectors with a mirrored two-channel S/PDIF output on a coaxial RCA connector. The AXI 02 AT interfaces with a Dante audio network over a standard local area network, and is powered through PoE. The AXI 02 AT includes a ZipClip® 100 Mounting Kit and is compatible with Extron Rack Shelves and ZipClip 200 mounting solutions.

This 8-input, 3-output digital multi-switcher features a built-in scan converter. It features 8 digital and 2 analog video inputs, accepting HDMI, HDBaseT, DVI, composite video, Y/C, analog RGB, and analog YPbPr signals. The input video signal is converted to a maximum resolution of 4K@30 and output as an HDMI or HDBaseT signal. The HDBaseT input connector can also supply power to an HDMI Cat 3D transmitter with PoH power. It features 8 digital and 2 analog audio inputs, and outputs the selected audio signal as digital audio. One of the three digital audio outputs can be selected and converted to analog audio for output. It also features a lip sync function to correct video and audio misalignment. RS-232C and LAN control ports enable remote control of various settings. In addition to remote control, you can also program control commands to control external devices connected to the unit via RS-232C, LAN, CEC, or contact closure. Control commands have a wait function (to wait for execution). This allows you to set the control command to be sent after the cooling time has elapsed, for example, for power control of a projector. Control commands can be executed from the front keys, RS-232C, or LAN, or by operating the input channel selection buttons or turning the power button ON or OFF. In addition to the standard model, the lineup also includes a Dante output model. Using network audio allows you to transmit 64 channels of audio at a sampling frequency of 48 kHz over a single LAN cable.

This 8-input, 4-output digital multi-switcher features a built-in scan converter. It features 8 digital and 2 analog video inputs, accepting HDMI, HDBaseT, DVI, composite video, Y/C, analog RGB, and analog YPbPr signals. The input video signal is converted to a maximum resolution of 4K@30 and output as an HDMI or HDBaseT signal. The HDBaseT input connector can also supply power to an HDMI Cat 3D transmitter with PoH power. It features 8 digital and 2 analog audio inputs, outputting the selected audio signal as digital audio. One of the four digital audio outputs can be selected and converted to analog audio for output. It also features a lip sync function to correct video and audio misalignment. RS-232C and LAN control ports enable remote control of various settings. In addition to remote control, you can also program control commands to control external devices connected to the unit via RS-232C, LAN, CEC, or contact closure. Control commands have a wait function (to wait for execution). This allows you to set the control command to be sent after the cooling time has elapsed, for example, for power control of a projector. Control commands can be executed from the front keys, RS-232C, or LAN, or by operating the input channel selection buttons or turning the power button ON or OFF. In addition to the standard model, the lineup also includes a Dante output model. Using network audio allows you to transmit 64 channels of audio at a sampling frequency of 48 kHz over a single LAN cable.

The third generation of Sony's acclaimed DWX series, this high performance digital wireless receiver is an ideal choice for live sound applications including theatre and concerts, as well as studio based TV production and EFP. The two-channel 1U rack-mountable wireless receiver features Sony's advanced digital audio processing, encryption and RF transmission technologies to assure secure, stable transmission and reception of very high quality audio with low latency. The DWR-R03D is ideal for use in large-scale multi-channel productions, supporting up to 21 simultaneous channels per 8MHz TV band. Support for the Dante® audio-over-IP standard enables networked multi-channel operation. The DWR-R03D is compatible with Sony Wireless Studio control software for PC (Ver 5.0 or later) and the Wireless Studio Mobile smartphone app, allowing flexible remote operation. Remote control of up to 82 transmitters is possible using the Cross Remote™ function combined with the RMU-01 remote control unit (available separately).

DK Vascom's PSW 700 Series are analog/digital hybrid wireless microphone systems. DK Vascom's PSW 700 Series are analog/digital hybrid wireless microphone systems.

• Optimized PLL synthesizer and microprocessor technology
• Pilot tone squelch control
• True diversity technology
• Broad switching bandwidth and fine channel adjustment by 25kHz
• Safe configuration of a multi-channel system with network
• Frequency group composed of channels minimizing influence of secondary and tertiary intermodulation
• Searching channel not in use from frequency group
• Analogue compander technology with high resolution for vocal and high-sensitivity speech
• Microphone Head Simulation by DSP
• 6 Digital Parametric Equalizer
• Digital Reverb
• Digital Auto Level Controller
• Pink Noise, Sine wave Generator
• Audio Spectrum Analyzer by FIR Filter
• PC connected function of measuring RF condition in field
• Result of server-connected measurement and analysis of RF condition(patented technology)
• Remote tuning function for whole audio environment(patented technology)
• Dante network audio interface
• SPDIF digital audio optical output