Cart
← Back to Product Catalog

Dynacord – IPX5:4

Amplifiers

More details

Similar Products

ied-1542NA-D_600px_0|ied-1542NA-D_600px_0
  • AtlasIED

AtlasIED – IED1542NA-D

This product has reached "end-of-life" and is discontinued by the manufacturer The 1542NA-D is a compact power amplifier module capable of driving small loudspeaker loads in a GLOBALCOM® system.The 1542NA-D provides two outputs, each with 4 watts of power into an 8Ω load. This makes the module ideal for powering small zones that are made up of only a few low-powered loudspeakers.The audio inputs to the module are through the Ethernet audio network and are configured from the GLOBALCOM® System Management Center. The 1542NA-D model allows the use of Dante™ audio networking protocols.The 1542NA-D is powered using standard PoE and draw a maximum power of 13 watts. If PoE equipment is not used, an input is provided for an external +48VDC power supply. A green power indicator LED is included to show that the unit is powered on. Each channel has a green LED indicator that illuminates when signal is present and a yellow LED to indicate clipping. Another yellow LED illuminates to indicate that the device is in thermal overload. When this condition occurs, the device will stop passing signal until the condition has cleared.The amplifier is provided in an enclosure that either mounts to a DIN rail or is screwed down on a panel or wall to allow for convenient installation in remote closets close to the loudspeaker zone.Features
  • Available in single-channel or two-channel configurations
  • Available with Dante™ audio network interface
  • Control and configure using a web browser and GLOBALCOM® System Management Center
  • Settings storage in non-volatile memory
  • Full integration with theAtlasIED GLOBALCOM® vACS
  • Utilizes IEEE 802.af Power over Ethernet (PoE)
  • Removable connectors for easy installation
  • Rugged DIN-rail or panel/wall mount enclosure
    Amplifiers
See the product
asystems-nt4004D
  • Asystems

Asystems – NT4004D

The Asystems NT4004 Network Power Amplifier offers fixed installation contractors and integrators a streamlined, cost-effective solution for providing quality audio in multi-zone facilities. The NT4004 comprises four pristine input channels, multi-channel power amp and 40-bit signal processing. Internal signal processors include 10-band parametric EQs, limiters, crossovers and speaker delay compensation. Among the numerous essential audio processors available in the control software, Asystems engineers have thoughtfully included real-time power monitoring/management features that maintain consistent and controlled operating temperature to ensure system reliability for long-term peace of mind. Once you put an Asystems NT4004 in the rack, it stays in the rack.

https://www.asystems-sys.com/index.php/products/audio-switcher/network-amplifiers/nt4004

    Amplifiers
See the product
  • Extron Electronics

NetPA U 2004 FX

The Extron NetPA U 2004 FX is a four channel, high performance Dante-enabled power amplifier with software configurable outputs that can simultaneously drive 8 ohm, 4 ohm, 70V, or 100V loads in multi-zone systems. For maximum flexibility, the total power of two adjacent 200 watt channels is shared, delivering up to 400 watts per single channel, according to system requirements. With its integrated DSP, the NetPA U 2004 FX includes essential signal processing for complex, decentralized systems while AES67 support ensures compatibility with other network audio devices. This Ecofficient Level 2 design features InstaWake, the ability to go from standby to full power in under 50 milliseconds. The fan cooled 1U enclosure does not require empty rack spaces for ventilation and includes front and rear rack mount hardware for stability.
    Amplifiers
See the product