Cart
← Back to Product Catalog

Sennheiser – SL DI 4 XLR

Microphone Preamps

More details

Similar Products

1073opx-134-p[ekm]1000x666[ekm]
  • AMS Neve

AMS Neve – 1073OPX

Eight Legendary 1073® remote-controlled Preamps with Marinair® Transformers, USB and Dante digital connectivity taking the Classic Neve preamp sound into the future.

Features:

  • 8 Channels of remote-controlled 1073 Mic/Line/Instrument Preamplifiers.  
  • Exclusive Neve® Marinair® transformers on Microphone input.
  • Class-A transformer-less DI input
  • Remote control software can control up to 8 1073® OPX racks at a time (64 preamps!)
  • Automatic Total Recall™ of all settings.
  • Front Mic/Line combi input
  • Rear Mic/Line D-Type connection
  • 80Hz High pass filter
  • -25dB pad
  • Phase flip
  • Smart Phantom Power control
  • Hi/Lo Impedance selector from 300Ω to 1.3KΩ
  • Separate stereo monitor path with Independent level control
  • Latency-free monitoring of all signal sources
  • Eight front D.I inputs for instrument tracking
  • Front mounted Headphone output
  • Digital Option containing:
    • USB connection for use as standalone primary audio interface/core audio device.   
    • Dante Primary and Secondary connection for Audio-over-IP application. 
    • Word Clock Sync In/Out 
    • Selectable Headroom from +18, +24, +26dB 
    Microphone Preamps
See the product
1090-isa-428mkii-front-rear (2)
  • Focusrite

Focusrite – ISA 428 Mk II

ISA 428 MkII incorporates four of Focusrite's renowned mic pres in a simple-to-operate 2U enclosure, placing four mic preamps, instrument inputs and line ins at your fingertips. The original Focusrite mic pre was designed to suit the microphones of the time; today's model makes one small change, adding three additional input impedances to the classic ISA 110 setting, allowing you to match any microphone, old or new, and access a wide range of sounds, from the character and warmth of a vintage mic to the clear transparency of a modern design.

Each mic pre has the option of mic, line or the front-panel instrument input, with variable input impedance to ensure you are getting the best performance from the source. Up to 60dB of gain is available on the four-position rotary and gain range switches, with a further +20dB of continuously variable trim, meaning a huge 80dB of gain is available should it be required. The high-pass filter features variable cut-off frequency between 16 and 420Hz. An array of 6-segment LED meters show peak signal level for the four mic pres, in addition to the four direct inputs to the optional A-D card. Switchable rear-panel insert points allow the use of inline processors such as compression.

    Microphone Preamps
See the product
Sennheiser_-_EM_6000
  • Sennheiser

Sennheiser – EM 6000

Sennheiser's EM 6000 is a digital 2-channel receiver for live productions and transmissions, even in the toughest environments. Huge spectral efficiency with equidistant frequency grid and true bit diversity. Analog and digital outputs (XLR, jack, AES-3, redundant Dante™), high-contrast OLED display with LQI indicator.   Sennheiser's EM 6000 is a digital 2-channel receiver for live productions and transmissions, even in the toughest environments. Huge spectral efficiency with equidistant frequency grid and true bit diversity. Analog and digital outputs (XLR, jack, AES-3, redundant Dante™), high-contrast OLED display with LQI indicator. Higher channel density with maximum signal reliability at the same time: Digital 6000 is intermodulation-free and assures through its equidistant frequency grid excellent spectral efficiency and the simplest frequency configuration– even in the toughest frequency environments where other systems already fail. Error correction and audio error masking recognize and fix problems long before they even become audible. When it comes to setup and the user interface, the EM 6000 stands out for clarity, relevance and short pathways. Digital 6000 can be seamlessly integrated into existing digital or analog infrastructures. The EM 6000 receiver has a digital AES-3 output with word clock inputs and outputs, high-quality transformer-balanced analog XLR and 6.3 mm jack outputs as well as a 6.3 mm headphone output. The Dante™ version with an Audinate Brooklyn ll card additionally offers two Amphenol RJ-45 connectors for integrating the receiver into a Dante™ network, for redundant networks or daisy chain cabling. Whether we’re talking about reducing information down to the really meaningful key values or smart menus on a high-contrast OLED display, every operating element is a result of practical experience and designed for practical use. All the vital parameters are summarized in one view. Important functions can be reached directly via home screens without long navigation paths. The auto-setup enables scanning and frequency distribution to all connected devices directly via the receiver; naturally Digital 6000 can also be monitored and configured via the Wireless System Manager (WSM). The EM 6000 is compatible with UHF Sennheiser antenna systems.
    Microphone Preamps
  • Dante Ch: 0x4
  • 24-bit
See the product