Cart
← Back to Product Catalog

AKG – DMS800

Microphone Preamps

More details

Similar Products

isa828mkii
  • Focusrite

Focusrite – ISA 828 MkII

The ISA 828MkII incorporates eight of Focusrite's classic mic preamps, with Lundahl LL1538 transformers on every input. Each channel has the option of mic or line inputs,while inputs 1-4 also feature instrument inputs on the front panel. Each mic pre has variable input impedance, to provide a range of subtly different sonic options when using microphones, including an 'ISA 110' setting, which replicates the impedance of the original Focusrite mic pre.

Up to 60dB of gain is available, with a further +20dB of continuously variable trim,providing a huge 80dB gain range. The high-pass filter has a fixed 75Hz frequency and 18dB / octave roll-off for minimising rumble, stand-borne noise and other low-frequency sounds. The ISA 828 MkII also features per-channel,six-segment LED meters, and switchable rear-panel insert points, which allow the use of inline processors such as compressors or EQs.

Dedicated connectors for mic and line-level inputs allow all sources to be connected simultaneously, making ISA 828 MkII perfect for permanent installation in a rack. A switching power supply allows for efficient, cool operation, without sacrificing sound quality or performance, and increasing reliability over its predecessor. The optional ISA ADN8 analogue-to-digital expansion card provides eight Dante, ADAT and AES3 outputs at sampling rates of up to 24-bit / 192kHz.

    Microphone Preamps
  • Dante Ch: 0x8
  • 24-bit
See the product
Whirlwind_-_ES4_Digital_Snake|Whirlwind_-_ES4_Digital_Snake
  • Whirlwind

Whirlwind – ES4 Digital Snake

The ES4 system offers sixteen channels of American made, professional quality microphone preamplification and eight line level return channels via a choice of digital transport formats. The ES4 system offers sixteen channels of American made, professional quality microphone preamplification and eight line level return channels via a choice of digital transport formats. Each ES4T (transmitter) and ES4R (receiver) can be configured for Cobranet®, or Dante® formats by simply changing the network module in the unit. The exceptional performance, ease of use, and extreme flexibility make the ES4 series products excellent I/O devices for any digital audio network. The typical Whirlwind ES4 system consists of two components: the ES4T transmitter module, which has sixteen balanced mic/line inputs and eight line level outputs. The matching ES4R receiver module has sixteen line level outputs and eight line level inputs. All inputs have variable gain controls and LED level monitoring.  
    Microphone Preamps
See the product
hear-technologies-switchback-M8RX
  • Hear Technologies

Hear Technologies – Switch Back M8RX

With intuitive design and robust capabilities, the Switch Back M8RX™ is actually two products in one. This gives the musician a choice to play live, record, or monitor their mix all in one single tool. With intuitive design and robust capabilities, the Switch Back M8RX™ is actually two products in one. This gives the musician a choice to play live, record, or monitor their mix all in one single tool. The M8RX is a personal interface to be used for live sound or recording, and also a multi-channel headphone monitoring system. While compact in size, the M8RX gives individuals options to use it in multiple ways, such as a mini recording studio setup or a simple communication system. The research and design of the M8RX is what sets it apart. Our engineers created the sleek look and feel making it perfect for hanging from a belt, mounting on a mic stand, or sitting on a table. The M8RX features a total of eight channels of audio mixing – two studio-quality microphone preamps, two channel line-inputs, and four Dante network audio inputs/outputs. The M8RX’s two mic preamps have a distortion spec below 0.001% along with zero-latency analog mixing and monitoring of the four analog inputs. With Ethernet capability becoming standard in most pro audio gear today, the M8RX includes a total of four channels of Dante network audio inputs/outputs. Along with the same high quality headphone amplifier as in the Hear Back PRO and OCTO systems, the M8RX has 5 watts of headphone power and can be connected to a computer via the Ethernet port. The unit uses PoE power over the same Cat5e cable as the Ethernet. The M8RX is manufactured in the U.S. to ensure our customers get the quality they have come to expect from Hear Technologies.
    Microphone Preamps
  • Dante Ch: 4x4
  • 24-bit
See the product