Cart
← Back to Product Catalog

Powersoft – Duecanali 1604 DSP+D

Amplifiers

More details

Similar Products

ashly-nXe-1.54_600px|ashly-nXe-1.54_600px
  • Ashly Audio

Ashly – nXe1.54bd

The nXe1.54bd is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 1,500W per channel at Low Z and 70V modes, and 1,250W in 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors is Neutrik® XLR/TRS combo jack and Euroblock, while output connectors is Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The amplifier has temperature dependent variable speed forced-air cooling.
    Amplifiers
  • Dante Ch: 4x0
See the product
Cobalt C-3000 Fully Featured FM Transmitter
  • Aqua Broadcast

Cobalt C-5000 Fully Featured FM Transmitter

The COBALT C-5000 is a fully featured 5000W / 5kW FM Transmitter that has superior audio quality and sound clarity thanks to it‘s Direct to Channel Digital technology (DDS). Running on a Ifully customized LINUX OS system, this low distortion modulator is available on all models within the COBALT family of FM Transmitters. Inputs and outputs include Analog, AES/EBU, Digital MPX (AES192), Ethernet, USB, GPIO, GPS Sync with built in SFN capabilities.
    Amplifiers
  • 24-bit
  • 32kHz-192kHz
See the product
CMX - Power amplifier with DSP & Dante
  • CMX

CMX – DSP-4060

The CMX DSP-4060 is a power amplifier with DSP and Dante.

  • 4 x 60W power amplifier
  • 100V, 70V, 4 Ohm & 8 Ohm output with selectors
  • Built-in DSP with EQ, gain control, crossover, delay, limiter, high-pass filter & low-cut filter
  • Dante network control with 4 In 4 Out matrix
  • Two Ethernet RJ-45 network connector for both Dante and DSP configure
  • Remote GPIO for failure outputs
  • 1U height 19” rack mount type power amplifier
  • Balanced line input by phoenix connector for four channels.
  • Each four inputs with separate gain control.
  • Separate four channel indicators for protection, clip, input and output.
  • Complete short circuit, overload, high temp, clip and DC protection.
  • Dante increases connectivity flexibility, and provides the freedom to use the amplifier power away from the source, wherever it is needed. It also enables the models to allow mixed inputs using either digital or onboard analog audio connections
    Amplifiers
See the product