Dante-enabled Product Catalog

The es-269 compact ACM subwoofer system redefines small subwoofer capabilities by producing high output exceptionally high-quality sound from a very compact dual driver system.  The es-269 compact ACM subwoofer system redefines small subwoofer capabilities by producing high output exceptionally high-quality sound from a very compact dual driver system. With reference quality flat low-end response from 200 to 45 Hz, the es-269 is capable of output levels of systems typically twice the size. The es-269 apples VUE’s patent-pending ACM -Active Compliance Management- technology from the hm-class subwoofers, to a new compact even “mini” subwoofer breaking the normal size ratio to SPL output standards. ACM technology combines both band-pass and vented alignments into a single enclosure. The s-269 places two high performance, 6×9-inch transducers into this configuration, with both woofers sharing a common vented chamber. One woofer’s frontal radiation is direct, while the second woofer’s frontal radiation drives the band-pass chamber. Using sophisticated DSP the two ACM subsections combine acoustically precisely aligning the phase arrivals of the front facing woofer, the common chamber vent, and output of the bandpass chamber vent. The powerful amplifier sends 200W of pure sine wave power (350W “burst”) with a unique optimized signal to each woofer. The combination of 700 watts of burst power produces over 124 dB peak output in a half space environment (ground stacked). The combination of ACM, precision-engineered transducers, and sophisticated electronics allows the s-269 to deliver much higher output throughout its operating bandwidth from a remarkably small enclosure. Features

• Exceptionally low front profile: Architect-pleasing design with esoteric audiophile quality and professional audio output down to 40 Hz
• ACM (Active Compliance Management): Patent-pending hybrid design combines both band-pass and vented alignments into a single, compact footprint for more output and definition.
• Very low distortion with professional sound pressure output
• Innovative Purpose-designed dual 6×9-inch high output cone transducers
• Premium birch plywood enclosure with extensive internal bracing and a highly-durable Dura Coat finish.
• Specially designed for use with the VUEDrive V242 Systems  Engine to provide a new level of sonic accuracy and output
• Flexible mounting bracket allows fixed installation on the wall or to the ceiling

The two-way e-352 Nano Speaker redefines small loudspeaker capabilities by producing high output exceptionally high-quality sound form a very compact aluminum die-cast weather and corrosion resistant system.  The two-way e-352 Nano Speaker redefines small loudspeaker capabilities by producing high output exceptionally high-quality sound form a very compact aluminum die-cast weather and corrosion resistant system. With reference quality flat response from 130 Hz to well above what the most discerning humans can hear, the e-352 is capable of output levels of systems typically twice the size. The e-352 utilizes applying state-of-the-art materials and technology to achieve audiophile quality at professional sound pressure levels. State-of-the-art dual 3.5-inch cone transducers achieve high output by combining a very powerful Neodymium magnetic circuits for efficiency with high-temperature voice coils and physical optimization of the magnet assembly for maximum heat dissipation to the aluminum enclosure. Mated to these drivers is a unique beryllium 25 mm dome tweeter with powerful Neodymium magnetic assembly for low distortion extend high-frequency response and high efficiency. The passive crossover is precisely mated to the specialized DSP in the VUEDrive V242 Systems Engine to maximize response accuracy while providing maximum power and transducer protection. The die-cast aluminum enclosure provides considerable rigidity for resonance-free operation as compared with other compact systems with plastic enclosures. The aluminum baffle features an integrated high-frequency waveguide and very low diffraction to ensure the full high-frequency clarity of the beryllium dome hf driver is not compromised. The Aluminum enclosure’s ability to withstand corrosion and moisture damage also makes the e-352 well suited for use outdoors and in harsh weather applications. Features

• Redefines the SPL-to-size ratio: Architect-pleasing design with esoteric audiophile quality and professional audio output
• Very low distortion and flat response provides ultra high-end audiophile quality with professional sound pressure output
• Truextent® beryllium dome tweeter with exceptionally strong Neodymium magnetic circuit for  exceptional output, high-frequency bandwidth, and clarity
• Minimum-diffraction front baffle for audiophile high-frequency performance
• State-of-the-art dual 3.5-inch low-frequency high output cone transducers with Neodymium magnetic circuit
• Die-cast Aluminum Body — the e-352’s elegant enclosure is made from solid die-cast aluminum for maximum rigidity and corrosion resistance (available in black and white with optional full frontal metal grill IP-56 configuration)
• Passive system specially designed for use with the VUEDrive V242 Systems Engines dsp amplifier to provide a new level of sonic accuracy and output
•  Flexible mounting with included bracket enables quick and intuitive speaker aiming, with M6 screw to accept safety anchor.

Wisycom's MRK980 is a true diversity, ultra-wideband dual channel receiver.  WWisycom's MRK980 is a true diversity, ultra-wideband dual channel receiver.  With its 1090MHz of band switching, it ensures the users an exceptional band flexibility, combined with a superb selectivity and intermodulation immunity, for best operating performances of the wireless microphone systems. MRK980 also features an internal DSP processor, Wisycom famous Multicompanding system, new Dante compatibility and a completely and renewed user interface, which make this system easy and quick to setup. Features

• Two channels true diversity receiver (full DSP processing)
• Up to 1090 MHz bandwidth in 170/1260 MHz range
• Push to talk (PTT) enabled with dedicated outputs (optional)
• Analogue, AES/EBU & Dante outputs (with redundancy)
• Dante machine Synchronized mode: no sample rate delay!
• Next Gen Multiband front-end filtering:
  • High Q moving filter in 170-230 MHz
  • High Q moving filter in 470-800 MHz
  • High Q moving filter in 960-1160 MHz (DME) (or 806-810 MHz saw filter – Japan)
  • Country specific saw filters: USA 940-960 MHz or Japan 1240-1260 MHz
• Wideband and Narrowband DSP-FM operation (SW selectable):
  • Narrowband allows 50% more band efficiency (200/250 kHz channel density)
  • Narrowband allows about 3dB extra sensitivity and noise immunity
• Extreme low noise VCO with ultrafast spectrum scan for optimal quick & easy setup
• High contrast OLED display
• Monitor & control through USB and Wisycom Manager 2.0 (computer SW)
• Expansion slot for GPIO or future additional feature

The T Series is a very flexible and cost effective amplifier platform loudspeaker processor The T Series is a very flexible and cost effective amplifier platform loudspeaker processor. All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops. The amplifiers feature input via Dante, AES3 and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches/repeaters/ splitters. A simple Dante system has a daisy chain with the mixing console at one end and a WiFi access point at the other end and the amplifiers in-between.

The T Series is a very flexible and cost effective amplifier platform loudspeaker processor The T Series is a very flexible and cost effective amplifier platform loudspeaker processor. All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops. The amplifiers feature input via Dante, AES3 and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches/repeaters/ splitters. A simple Dante system has a daisy chain with the mixing console at one end and a WiFi access point at the other end and the amplifiers in-between.

The T Series is a very flexible and cost effective amplifier platform loudspeaker processor The T Series is a very flexible and cost effective amplifier platform loudspeaker processor. All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops. The amplifiers feature input via Dante, AES3 and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches/repeaters/ splitters. A simple Dante system has a daisy chain with the mixing console at one end and a WiFi access point at the other end and the amplifiers in-between.

The T Series is a very flexible and cost effective amplifier platform loudspeaker processor The T Series is a very flexible and cost effective amplifier platform loudspeaker processor. All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops. The amplifiers feature input via Dante, AES3 and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches/repeaters/ splitters. A simple Dante system has a daisy chain with the mixing console at one end and a WiFi access point at the other end and the amplifiers in-between.

Atlas is a USB multi-track audio interface for personal recording and sound production, for professional musicians, songwriters, engineers and producers as well as recording studios, post production facilities and scoring stages. Atlas is ideal for music and sound recording, mixing, multitracking, overdubbing, stem-based mastering, analogue summing and critical listening applications.    Atlas is a USB multi-track audio interface for personal recording and sound production, for professional musicians, songwriters, engineers and producers as well as recording studios, post production facilities and scoring stages. Atlas is ideal for music and sound recording, mixing, multitracking, overdubbing, stem-based mastering, analogue summing and critical listening applications.  Atlas offers eight analogue recording channels, eight monitoring outputs, stereo digital input and output on a phono connector plus concurrent optical digital I/O ports that can interface to S/PDIF or ADAT data formats, giving Atlas a maximum capability of 18 concurrent input and output channels plus stereo headphones.   

Titan is a USB multi-track audio interface for personal recording and sound production, for professional musicians, songwriters, engineers and producers as well as recording studios, post production facilities and scoring stages. Titan is ideal for music and sound recording, multitracking, overdubbing, stem-based mastering, analogue summing and critical listening applications.    Titan is a USB multi-track audio interface for personal recording and sound production, for professional musicians, songwriters, engineers and producers as well as recording studios, post production facilities and scoring stages. Titan is ideal for music and sound recording, multitracking, overdubbing, stem-based mastering, analogue summing and critical listening applications. 

The DANTE module allows multiple Titan or Atlas units to be connected directly to a DANTE equipped network.   The DANTE module allows multiple Titan or Atlas units to be connected directly to a DANTE equipped network. With this setup, DANTE users can enjoy the excellent sound quality of both the Titan and Atlas A/D and D/A converters, and their equally well regarded on-board microphone preamplifiers. Titan was recently rated 'the pinnacle of USB recording' with 'fantastic converters and mic pre's' by John Gatski, of Everything Audio Network.  Control of the Prism Sound Titan or Atlas units when connected to DANTE is easy. When connected over a network the units are controlled using a dedicated software app that is available for both Mac and Windows. This enables you to control the units from any computer on the network or via its dedicated USB port. The set up information can be stored for instant recall within the dedicated app unlike many third party interfaces whose settings cannot be recalled.  

Montarbo® WIND PRO 208A is an active acoustic loudspeaker designed to guarantee extremely high performances in terms of power and quality. Montarbo® WIND PRO 208A is an active acoustic loudspeaker designed to guarantee extremely high performances in terms of power and quality. Features

• Very high performance-to-size ratio
• 2-channel amplifier 800 W + 800 W RMS
• 132 dB SPL
• Quasi 3-Way acoustic design
• 8” neodimium coaxial speaker with 2” voice coil and 1” Driver with 3” voice coil
• 8” neodimium woofer with 3” voice coil
• 80° conical coverage
• 24 Bit 96 kHz DSP with M-Modelling Technology
• Integrated DANTE
• M-Modelling Technology
• Compatible Softwares: M-Connect and M-Simulation
• Wi-Fi Connection
• M-ID authentication system via app
• Integrated Rigging

Montarbo® WIND PRO 210A is an active acoustic loudspeaker designed to guarantee extremely high performances in terms of power and quality. Montarbo® WIND PRO 210A is an active acoustic loudspeaker designed to guarantee extremely high performances in terms of power and quality. Features

• Very high performance-to-size ratio
• 2-channel amplifier 800 W + 800 W RMS
• 135 dB SPL
• Quasi 3-Way acoustic design
• 10” ferrite coaxial speaker with 3” voice coil and 1,4” Driver with 3” voice coil
• 10” neodimium woofer with 2,5” voice coil
• 70° horizontal, 50° vertical coverage
• 24 Bit 96 kHz DSP with M-Modelling Technology
• Integrated DANTE
• M-Modelling Technology
• Compatible Softwares: M-Connect and M-Simulation
• Wi-Fi Connection
• M-ID authentication system via app
• Integrated Rigging

Montarbo® WIND PRO 212A is an active acoustic loudspeaker designed to guarantee extremely high performances in terms of power and quality. Montarbo® WIND PRO 212A is an active acoustic loudspeaker designed to guarantee extremely high performances in terms of power and quality. Features

• Very high performance-to-size ratio
• 2-channel amplifier 1200 W + 1200 W RMS
• 139 dB SPL
• Quasi 3-Way acoustic design
• 12” neodimium coaxial speaker with 3” voice coil and 1,4” Driver with 2,4” voice coil
• 12” ferrite woofer with 3” voice coil
• 70° horizontal, 50° vertical coverage
• 24 Bit 96 kHz DSP with M-Modelling Technology
• Integrated DANTE
• M-Modelling Technology
• Compatible Softwares: M-Connect and M-Simulation
• Wi-Fi Connection
• M-ID authentication system via app
• Integrated Rigging

Montarbo® WIND PRO 215A is an active acoustic loudspeaker designed to guarantee extremely high performances in terms of power and quality. Montarbo® WIND PRO 215A is an active acoustic loudspeaker designed to guarantee extremely high performances in terms of power and quality. Features

• Very high performance-to-size ratio
• 2-channel amplifier 1200 W + 1200 W RMS
• 141 dB SPL
• Quasi 3-Way acoustic design
• 15” neodimium coaxial speaker with 3” voice coil and 1,4” driver with 2,4” voice coil
• 15” ferrite woofer with 3” voice coil
• 70° horizontal, 50° vertical coverage
• 24 Bit 96 kHz DSP with M-Modelling Technology
• Integrated DANTE
• M-Modelling Technology
• Compatible Softwares: M-Connect and M-Simulation
• Wi-Fi Connection
• M-ID authentication system via app
• Integrated Rigging

The XTP II CP 4o HD AT 4K PLUS is an XTP® output board with four HDMI and Dante digital audio outputs. Dante digital audio output enables audio transport of up to four stereo audio signals over a network using standard Internet protocols. The XTP II CP 4o HD AT 4K PLUS is an XTP® output board with four HDMI and four Dante® digital audio outputs. It is HDCP 2.2-compliant and accommodates data rates up to 18 Gbps for support of video resolutions up to 4K/60 with 4:4:4 color. The Dante output adds the capability to take any four stereo audio signals that are routed through the XTP system and transport them as Dante audio over a network using standard Internet protocols. This XTP output board also supports AES67, along with Audinate® Dante Controller and Dante Domain Manager software. Paired with Extron’s many Dante-enabled audio processing products, the XTP II CP 4o HD AT 4K PLUS board facilitates convenient expansion of XTP Systems as part of a complete networked audio system solution.

The Model 381 On-Air Beltpack offers a unique combination of audio resources to directly support a complete broadcast "stand-up" on-air position.  The Model 381 On-Air Beltpack offers a unique combination of audio resources to directly support a complete broadcast "stand-up" on-air position. Using Dante® audio-over-Ethernet technology, the unit provides main and talkback output channels, talent cue (IFB) input, and sidetone capabilities, as well as essential user controls in a compact, portable package. The Model 381 is compatible with the Dante Domain Manager™(DDM) software application and is AES67-compliant for direct integration into many contemporary networked audio applications. Key Features

• Dante audio-over-Ethernet technology
• Creates complete "stand-up" on-air position
• One main and one talkback output channel
• Highly-flexible 2-channel headphone output
• Integrated sidetone function
• Excellent audio quality
• Uses STcontroller for configuration
• Power-over-Ethernet (PoE) powered

The Model 5412 Audio Interface provides a simple yet high-performance means of interfacing line-level analog signals with applications that utilize Dante® audio-over-Ethernet media networking technology. The Model 5412 Audio Interface provides a simple yet high-performance means of interfacing line-level analog signals with applications that utilize Dante® audio-over-Ethernet media networking technology. Analog sources can be connected to the unit and then output in the digital domain by way of a Dante interface. Digital audio signals, which also arrive by way of Dante, are converted to analog and then output as balanced line-level signals. For application flexibility and troubleshooting a configuration choice allows other audio signals to be selected as the sources for the analog output channels. The Model 5412 is available in two versions – one with 8 input and 8 output channels and the other with 16 input and 16 output channels. Key Features

• Two versions available: 8 or 16 input and output channels
• Analog line-level inputs to Dante outputs
• Dante inputs to analog line-level outputs
• Three Gigabit Ethernet interfaces
• Standard connectors
• Excellent audio quality
• AC mains and 12 volt DC powering
• Lightweight enclosure, single rack-space (1U) mounting

The Model 5418 Mic/Line Interface provides a simple yet high-performance means of interfacing analog signals with applications that utilize Dante® audio-over-Ethernet media networking technology. The Model 5418 Mic/Line Interface provides a simple yet high-performance means of interfacing analog signals with applications that utilize Dante® audio-over-Ethernet media networking technology. Eight analog microphone- or line-level sources can be connected to the unit and then output in the digital domain by way of a Dante interface. Eight digital audio signals, which arrive by way of Dante, are converted to analog and then output as balanced line-level signals. Configuration choices also allow other audio signals to be selected as the sources for the analog output channels. A monitor section allows the input and output signals to be selectively observed using meters and a headphone output. Key Features

• Dante audio-over-Ethernet technology
• Eight mic/line inputs to Dante outputs
• Eight Dante inputs to line-level analog outputs
• Flexible monitoring with metering and headphone output
• Three Gigabit Ethernet interfaces
• Standard connectors
• Excellent audio quality
• AC mains and 12 volt DC powering
• Lightweight enclosure, single rack-space (1U) mounting

Add up to 128 channels of high-density, low-latency digital audio using Dante (128 channels at 44.1 kHz or 32 channels at 192 kHz) Add up to 128 channels of high-density, low-latency digital audio using Dante (128 channels at 44.1 kHz or 32 channels at 192 kHz)

Though identical in appearance to the SD7, the SD7B goes a stage further as it has been developed for broadcast applications. Though identical in appearance to the SD7, the SD7B goes a stage further as it has been developed for broadcast applications. As well as full Flexi channel capability, routing flexibility has been vastly increased to allow for LCRS and 5.1 mixes as well as stereo and LCR. In addition, broadcast-specific features include a complete 5.1 monitor matrix with 48 x 6 source to speaker selection; mutli channel folding; user defined stem order selection; Mix Minus busses (one per mono channel); backstop PFL (over press) and Auto PFL; and Audio Follow Video implementation.  Scratching the surface A combination of technologies have been seamlessly integrated into the SD7B's worksurface to meet the everyday needs of any engineer. We've managed to pack them into three user-friendly interactive 15-inch high-resolution touch screens, each of which accommodates a bank of 12 faders,  to provide the user with the perfect platform – everything is just 'where it should be'. To make navigation even easier, we've added high-definition interactive meter bridges and multicoloured knobs and switches; and for further functionality and flexibility, 16 assignable faders (one bank of 12, one bank of four) sit neatly below the master screen in the centre of the console, taking the SD7B's fader tally to a sizeable 52. To increase the fader count further for multi-engineer applications and shows, an EX-007 Fader Expansion unit is available. Two EX-007s can be connected via a simple Cat5e connector for remote control or simply to increase your fader count to 100.

Quantum is a newer and smarter engine which offers so much more to users on so many levels, and allows engineers to upgrade into new generation technology with no learning curve whatsoever.  When DiGiCo built SD7, we never thought anyone would fill the console. However, due to the constant rise in production values, and audiences demanding more and more from their favourite artists, tours are now regularly pushing multiple SD7s to maximum capacity. Shows are way bigger than they used to be and as a result, engineers need a lot more outputs, signals, and channels.   To address this issue, we have developed Quantum, a newer and smarter engine which offers so much more to users on so many levels, and allows engineers to upgrade into new generation technology with no learning curve whatsoever. In creating Quantum, we wanted to guarantee that our customer base could maintain a return on their historical investment by providing them an affordable engine upgrade for their existing work surface.  We needed to make the next major technological step forward, into generation seven FPGA technology, and that's what Quantum has done. It will make shows easier to manage, with plenty of room for growth; it's a more flexible system, four generations newer in terms of capacity, therefore so much more can be done with it. Faster, more efficient, future-proof, and way more powerful.

The Dante card allows 64 channels tobesentto/ received from a Dante network. As well as providing audio exchange with other Dante-enabled equipment, the card also allows 64 channels of audio to be connected directly to a PC or Mac computer for recording or processing, by using a standard Ethernet connection*.  Routing and setup of the network is done using an external computer running Dante Controller software (available FOC from the Audinate website). A BNC sync output connector on the card allows the console’s wordclock input to be driven by the network clock, if required by the clocking setup.

The 9U Vi Stagebox houses 64 mic/line inputs and 32 analogue line outputs. Mic/line amp gain, 48 V phantom power and 100 Hz lo-cut filter before the A-D converters can all be controlled remotely from the desk.  The 9U Vi Stagebox houses 64 mic/line inputs and 32 analogue line outputs. Mic/line amp gain, 48 V phantom power and 100 Hz lo-cut filter before the A-D converters can all be controlled remotely from the desk.  The Stagebox is available in Standard 64/32 configuration, or can be reconfigured as part-fitted or with alternative cards as required.  Optional AES/EBU, CobraNet®, Ethersound®, Aviom A-Net® 16, Blu Link or Dante cards are available, as well as transformer balanced options for the mic input cards.

L100 is the latest addition to the SSL Live console family. It provides a physically smaller premium solution for customers who prioritise outstanding sonic performance in space restricted installations, for sub-mix positions or corporate production. L100 is the latest addition to the SSL Live console family. It provides a physically smaller premium solution for customers who prioritise outstanding sonic performance in space restricted installations, for sub-mix positions or corporate production. L100 sets itself apart with its compact, 12 + 2 fader configuration frame, while using SSL's fast access layer / bank switching and Super-Q technology to ensure no channel, group, aux, VCA, or master is ever far away from the engineer’s fingers. Users who require more faders can expand the L100 with the addition of SSL’s new Remote Tile and more screen space can be added via an external touchscreen and tablet control. The 17” multi-gesture touchscreen gives access to all of the console’s functions, and combines with Quick Controls in the Fader Tile to provide intuitive, immediate hands-on hardware control. The integrated tablet device stand combines with the newly released version of SSL’s TaCo tablet control application to offer an additional control interface for channel or Effects Rack processing. The Master Tile also provides Mute Group, Solo/Talkback, Assignable keys, and Automation controls.

SSL's L200 is a new mid scale console that brings the superb sound, accelerated workflow and advanced feature set of SSL Live to a new level of affordability. SSL's L200 is a new mid scale console that brings the superb sound, accelerated workflow and advanced feature set of SSL Live to a new level of affordability. SSL Live consoles are designed to help highly skilled operators deliver outstanding performances in the most demanding applications in Touring, Installation, Houses Of Worship and Theatre. Like all SSL consoles the secret to the success of the L200 is SSL’s dedication to great sound. Part of the success is attributable to exemplary hardware performance throughout the signal chain: bringing SSL Studio grade mic pre’s to the stage, outstanding audio conversion, 96kHz operation and magnificent summing. There is a sublime transparency, definition and detail in the fundamental sound of the L200 that is difficult to describe but is immediately recognisable as the SSL signature. An equal, perhaps even greater part of the secret of the power of the L200 is however the way it enables operators to perform at their very best. The deceptively simple ergonomic excellence of the combination of multi-touch screen control with assignable hardware controls, the use of colour coding, the open architecture which lets engineers configure the console layout to suit their own way of working, the arsenal of processing options, the precision and depth of those processing tools… and so much more… it all combines to let the operator get where they can hear they want to be extremely quickly. Like all great creative audio technology, SSL Live consoles are instruments for engineers.

The VP12X station is an off-the-shelf 12-zone paging station that’s designed to mount in a standard 8″ x 10″ Hoffman box like the C-P1612.  A single Ethernet cable provides Dante/AES67 network audio, power (PoE), and control between each V-Page station and the equipment room where the DSP is located.  It even supports SFP network modules for application that require a long run back to the equipment room. Alcorn McBride believe that paging solutions should be a breeze to install and intuitive to operate.  That’s why they designed the V-Page family of products to leverage the flexibility of industry-standard DSP platforms like Q-SYS and provide a simple button-based UI that just makes sense. The VP12X station is an off-the-shelf 12-zone paging station that’s designed to mount in a standard 8″ x 10″ Hoffman box like the C-P1612.  A single Ethernet cable provides Dante/AES67 network audio, power (PoE), and control between each V-Page station and the equipment room where the DSP is located.  It even supports SFP network modules for application that require a long run back to the equipment room.

The V-Com VC32K is an intercom station kit that enables you to create customized intercom consoles with up to 32-zones of ring control.  This kit is designed to mount on a standard DIN rail inside the console and comes with a handset, handset hook, ringer, panel-mount XLR harness, and earpiece volume knob. Alcorn McBride believe that intercom solutions should be a breeze to install and intuitive to operate.  Just like their popular V-Page product line, they have designed their V-Com solutions to leverage industry-standard DSP platforms like Q-SYS while providing a simple button-based UI that just makes sense. The V-Com VC32K is an intercom station kit that enables you to create customized intercom consoles with up to 32-zones of ring control.  This kit is designed to mount on a standard DIN rail inside the console and comes with a handset, handset hook, ringer, panel-mount XLR harness, and earpiece volume knob. A single Ethernet cable provides network audio (Dante or AES67), power (PoE), and control between each V-Com station and the DSP device.  It even supports SFP network modules for applications that require the station to be far away from the equipment room.