Cart
← Back to Product Catalog

TASCAM – MM-4D/IN-E

I/O Interfaces

More details

Similar Products

TASCAM_-_ML-4D-OUT-X
  • TASCAM

TASCAM – ML-4D/OUT-X

Built-in DSP 4 line outputs Dante converter to respond to various needs of contractor market and professional audio scene. Built-in DSP 4 line outputs Dante converter to respond to various needs of contractor market and professional audio scene. The ML-4D/OUT-X is a compact converter that converts Dante input signals into 4-channel line output signals. With half the size of a standard 1U rack, the ML-4D/OUT-X is suitable for different Dante systems as an exquisite analog output unit. The built-in DSP mixer enables small scale systems to fully perform with a variety of input/output models the TASCAM Dante Compact Processor Series offers. ML-4D/OUT-X supports up to 96kHz/24bit and uses XLR connectors for analog line output.  
    I/O Interfaces
See the product
AudioScience - Iyo Dante
  • AudioScience

AudioScience – Iyo Dante 0.32LR

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 0.32LR provides 32 balanced outputs. the output levels are configurable up to +24dBu. With RJ-45/StudioHub + GPIO Connector close-up.

RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status.

The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller.

Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack.

    I/O Interfaces
See the product
extron-axi44at|extron-axi44at
  • Extron Electronics

Extron – AXI 44 AT

The Extron AXI 44 AT is a quarter rack width audio interface for integrating four mic/line sources onto a Dante™-enabled audio system.  The Extron AXI 44 AT is a quarter rack width audio interface for integrating four mic/line sources onto a Dante™-enabled audio system. It features four mic or line inputs on 3.5 mm captive screw connectors, with switchable 48 volt phantom power. Input select, gain, and phantom power settings are controllable from the front panel, via DSP Configurator Software, or by SIS command. The AXI 44 AT also features four line level outputs for routing any four Dante channels from the network to the audio system. The AXI 44 AT interfaces with any Dante-equipped audio processor, and can be powered via PoE.
    I/O Interfaces
See the product