Cart
← Back to Product Catalog

Amphenol – RJD32A3-0050

I/O Interfaces

More details

Similar Products

amphenol-amphe-dante-RJD1112-0500_600px|amphenol-amphe-dante-RJD1112-0500_600px
  • Amphenol

Amphenol – Amphe-Dante RJD1112-0050

Amphe-Dante are Dante® audio to analogue audio adapters, with one RJ45 Dante input, and one AX series XLR analogue outputs in a molded housing. Amphe-Dante are Dante® audio to analogue audio adapters, with one RJ45 Dante input, and one AX series XLR analogue outputs in a molded housing. Amphe-Dante products enable simple connection of analogue equipment to a Dante network and can receive audio channels from a Dante network and provide studio-quality, low-latency audio via an XLR connector to analogue audio equipment. Any audio available on the Dante network can be routed via the XLR outputs to an amplifier, powered speaker, mixing console, digital signal processor (DSP), or other analogue audio device.
    I/O Interfaces
  • 24-bit
  • 44.1kHz-96kHz
See the product
micromedia-Digimedia-AMP-Pro_1200px|micromedia-Digimedia-AMP-Pro_1200px
  • Micromedia

Micromedia – Digimedia AMP Pro

Digimedia AMP Pro is a 2 channel Dante™ interface with analog amplifier output and PoE (Power over Ethernet) on board. There is Dante Domain Manager and AES67 support build in. Audio output power depends on PoE and can go up to 20W. Digimedia AMP Pro is a 2 channel Dante™ interface with analog amplifier output and PoE (Power over Ethernet) on board. There is Dante Domain Manager and AES67 support build in. Audio output power depends on PoE and can go up to 20W.
    I/O Interfaces
See the product
dac-288
  • Inter-M

Inter-M – DAC-288

The DAC-288 is a digital audio transport system utilizing Audinate’s DanteTM network audio solution. The DAC-288 connects to your network with a single Ethernet cable. It offers eight channels (2 mic/line selectable) of line-level analogue in and out, using precision 24-bit A-D and D-A conversion for superb audio performance, and 119dB dynamic range at sample rates up to 192kHz. This product is used as the audio matrix, each having eight inputs, where you can send uncompressed audio with low latency using standard TCP/ IP Ethernet network.
    I/O Interfaces
See the product