Cart
← Back to Product Catalog

Allen & Heath – Dante 64×64

Dante Interface Cards

More details

Similar Products

musicrown-dls-dante|musicrown-dls-dante
  • Musicrown

Musicrown – DLS Dante

Musicrown's Dante DLS is a Dante interface card. Musicrown's Dante DLS is a Dante interface card. 
  • High quality A/D(24-Bit)、D/A（24-Bit）convert, 48KHz sampling rate. Has extremely low network latency.
  • Network audio and local audio channel quantity can support maximum at 4IN/4OUT, can satisfy all kinds of application requirement.
  • Dante digital network port configuration is a double standard network interface, which fully supports the function of unite switching and hot backup.
  • Dante can be used in the standard existing network interchanger, has highly interoperability: perfect cooperation with other start using Dante device.
  • +5VDC power supply.
DLS Series:
  • DLS 2.0 - 2 analog input, 2 Dante output
  • DLS 0.2 - 2 analog output, 2 Dante input
  • DLS 2.2 - 2 analog input/output, 2 Dante input/output
  • DLS 4.0 - 4 analog input, 4 Dante output
  • DLS 0.4 - 4 analog output, 4 Dante input
  • DLS 4.4 - 4 analog input/output, 4 Dante input/output
    Dante Interface Cards
See the product
MDT22-E1|IMG_2664 (1)
  • Kingray

Kingray – MDT22-E1

▲ 2 audio (digital signal) inputs, 2 audio (digital signal) outputs, external GPIO

▲ ARM processor cooperates with embedded operating system to expand Cirrus Logic Audio Codec

▲ 24-bit, Σ- △ AD / DA, 44.1kHz, 48kHz, 88.2kHz, 96kHz sampling rates are optional,

▲   I2S digital audio format

▲ Freely set the sampling rate and equipment name

▲ Network audio transmission and control use standard Category 5 network cable (CAT5)

▲ Supports PCM16, PCM24, and PCM32 encodings, and can also use custom encoding formats

    Dante Interface Cards
See the product
  • Extron Electronics

Quantum OUT32AT

Quantum OUT32AT output card for Quantum Ultra II videowall processors that provides direct connection to Dante® systems. It delivers up to 32 stereo pairs of digital audio from a videowall system to a Dante audio network. Audio for each Dante stereo pair can originate from a source connected to an Extron Quantum IN4FOX3 or Quantum IN4HDMI 4K PLUS input card. Alternatively, it can follow the active program audio for any of up to 20 available canvases. A single Quantum OUT32AT output card can support an entire Quantum Ultra II system, simplifying audio management and videowall design.
    Dante Interface Cards
  • Dante Ch: 0x64
See the product