Bose - PowerShare PS604D

Bose – PowerShare PS604D

Product Information

PowerShare amplifiers deliver outstanding audio performance and reliability with patented technologies inherited from the field-proven PowerMatch line — now with added flexibility. Using innovative PowerShare technology, the amp shares power across all output channels and delivers 600 watts for installed applications.

Put the power where you need it. PowerShare amplifiers deliver outstanding audio performance and reliability with patented technologies inherited from the field-proven PowerMatch line — now with added flexibility. Using innovative PowerShare technology, the amp shares power across all output channels and delivers 600 watts for installed applications. This means you can distribute the total 600 watts asymmetrically across all outputs or use any individual output to deliver full power. And with support for both low- and high-impedance loads up to 100V, it’s easy to adapt PowerShare amplifiers to a wide range of applications. ControlSpace Designer software allows for Ethernet-based configuration and quick setup of external control options. With onboard Dante® audio networking, you have the flexibility to place PowerShare amplifiers away from source locations and closer to loudspeakers. This unique set of features and technologies makes PowerShare one of the most versatile, high-performance amplifiers available today.

Features

PowerShare Technology
Distribute the total 600 watts asymmetrically across all outputs using patented PowerShare technology, which allows each output to deliver full power. Instead of selecting amplifier power based on the needs of the largest zone, you now have the freedom to use total amplifier power in any application. This enables more flexibility during the initial design, or later on-site when making unplanned changes that take advantage of surplus power.
Load-independent Outputs
Configure any channel for low-impedance (4-8 Ω) or high-impedance (70/100V) applications without bridging or using jumpers.
Integrated Dante Audio Networking
Support four audio input channels from a Dante network and mix onboard analog inputs with digital Dante inputs as selected in ControlSpace Designer software.
Dual Feedback Loop System
Improve performance and reliability. The Dual Feedback Loop system, inherited from the field-proven Bose PowerMatch amplifier line, allows for continuous monitoring and control of both the current and voltage delivered to each output load. This combination provides improved linearity and lower distortion while protecting loudspeakers.
ControlSpace Networking
Configure using ControlSpace Designer software for inclusion into larger networked audio systems where end-user controllers and scheduling events can control amplifier parameters.
Integrated Loudspeaker Processing
Adjust various parameters using ControlSpace Designer software: nine-band PEQs, matrix mixing, crossover, limiters, delay, mute/output polarity, and more.
Auto-standby
Save power — PowerShare amplifiers can be configured to automatically enter standby mode when the audio signal falls below a set threshold, then wake when audio returns.

Applications

Performing arts venues
Places of worship
Conference centers
Retail stores
Restaurants and bars
Hospitality venues

Specifications

Dante Ch: 4x0
Bit Depth: 24-bit
Sample Rate: 48kHz

XTA – DNA100

Now you don’t have to choose between the highest quality amplification, and digital audio networking convenience. Or between incredible power and the ability to work within analogue or digital systems. You can have it all. Now you don’t have to choose between the highest quality amplification, and digital audio networking convenience. Or between incredible power and the ability to work within analogue or digital systems. You can have it all. The DNA Series offers the assurance of XTA’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking. Fast rear panel switching allows the amplifier to accept either four channels of analogue audio or pick up four channels of networked audio, via Dante, which is then converted using 24 bit 96kHz ADCs. Connect to an DPA amplifier using a single CAT5 cable to realise a stereo 4 way system with no further external processing required. Switch back to analogue to use as a powerful traditional quad channel amplifier. Run bridged channel pairs or link adjacent inputs for total flexibility in either analogue or digital mode.

Amplifiers

Dante Ch: 4x0
24-bit

See the product

Fohhn

Fohhn – DI-4.1000

The DI-4.1000 has an output power of 1000 W / 4 ohms per channel, four input- and four output channels. It has a compact 2U / 19“ enclosure and weighs just 9.4 kg. The amplifier works extremely quietly and its fans are not used while idling. The new DI-Series digital amplifiers have been developed and manufactured in house by Fohhn in Germany. At every stage of development, new intelligent technologies have been implemented. The DSP-controlled amplifiers perform at the highest level and guarantee maximum operational reliability, highest power density and excellent sound. Since 2002, Fohhn has been developing extremely high quality, reliable digital electronics that have been consistently incorporated into the company’s own product lines. The DI-Series amplifiers represent 15 years of know-how in digital electronics, with a great many customer wishes brought to fruition as a result. Developed for mobile sound reinforcement applications and fixed installations, the amplifiers offer all the essential features plus virtually unlimited connectivity with regard to audio signal inputs. Even if you opt right now for an AES/EBU, Dante™, Optocore or Analog option, you are not permanently committed: The optional input interfaces can be changed, as required, customizing your amplifier to suit the relevant digital or analogue network. Extensive DSP input and output processing enables you to intelligently adapt your loudspeaker systems to the particular sound reinforcement situation and room acoustic. All DSP functions can be controlled in real time using FOHHN AUDIO SOFT. The DI-4.1000 has an output power of 1000 W / 4 ohms per channel, four input- and four output channels. It has a compact 2U / 19“ enclosure and weighs just 9.4 kg. The amplifier works extremely quietly and its fans are not used while idling. Features

developed for mobile applications and fixed installations
network compatible, remote control, remote monitoring
extensive DSP input and output processing
input options: AES/EBU (terminal block or XLR), Dante™, Optocore or Analog
output options: terminal block or Speakon connectors
microprocessor-controlled universal power supply, 100-240 V AC, with Power Correction Factor (PFC) and sensory functions for mains voltage, power consumption and temperature
Auto Power Save for fan-free idling, temperature-controlled fans
two configurable switching contacts, one fault contact
performance presets for all relevant Fohhn loudspeakers
up to 10 seconds peak power

Amplifiers

Dante Ch: 4x0
16-bit, 24-bit

See the product

Yamaha

Yamaha – XMV Series

XMV Series multi-channel power amplifiers combine Class-D efficiency with features designed specifically to benefit commercial installation sound systems. The Series is comprised of 4 different models with varying output power capabilities and flexible in/out connectivity to accommodate a wide range of installation environments.

Amplifiers

See the product

Bose – PowerShare PS604D

Product Information

Specifications

Similar Products

XTA – DNA100

Fohhn – DI-4.1000

Yamaha – XMV Series

Stay connected to Dante

Support

Company

Dante Networking Alliance