The 64-channel 48 kHz bi-directional audio interface brings even more I/O options to the WING by making it ready for integration with Dante enabled IP networks. Dante is a proprietary AoIP solution from Audinate, which also complies with the AES67 standard for improved interoperability. It uses either standard 100Mbit/s or Gigabit Network infrastructure with DSCP-based QoS, with support for mixed sample and bit rates coexisting on the same network. The WING-DANTE card utilizes 24-bit signal transmission with sample-accurate synchronization and low latency, ensuring the highest audio integrity. Its secondary input allows you to set up a seamless, redundant network access.
4 x 4 Dante ™ converter Allows the conversion and distribution of 4 analog sources on the Dante ™ network and 4 Dante ™ sources in analog line level • Microphone (with detachable phantom power) / line inputs • Detachable euroblock input / output connectors • LCD configuration screen • Mains power supply included
Technical data:
Type: Dante™ interface 4x4 Input Connectors: 4 x euroblock Output Connectors: 4 x euroblock Input impedance: > 11 kohms Maximum input level: + 12dBu Output impedance: < 100 ohms Maximum output level: + 12 dBu Frequency reponses: 20 Hz - 20 kHz (+- 0,2dB) THD: < 0.012% (@ 1kHz +12 dBu) Power supply: 100 - 240 V, 50/60 Hz Consumption: 7,5 W Dimensions (HxWxD): 45 x 215 x 145 mm Weight: 1.38 kg (excluding accessories)
Allows the conversion and distribution of 4 analog sources on Dante™ network • detachable euroblock input/output connectors • PoE (provided) or 12V power supply (not provided)
Technical data:
Type: Dante™ interface 4x4 Input Connectors: 4 x euroblock Output Connectors: 4 x euroblock Audio network connector: RJ45 Input impedance: > 1.8 kohms Maximum input level: +8 dBu Output impedance: 200 ohms Maximum output level: + 20 dBu Frequency response: 20 Hz - 20 kHz (+/- 1 dB) THD+N: < 0.02% Power supply: PoE 802.3 af (provided) or 12 V external (not provided) Consumption: 10 W max Dimensions: 52 x 81 x 121 mm Weight: 357 g
2 way 8" coaxial ceiling speaker, Dante™ PoE+ • last generation 60W class D amplifier card with integrated DSP • Allows powering of another passive ceiling Spik Up P • Wide and homogeneous directivity 100° x 100° • Euroblock connector for use with external amplification • Remote control of volume, bass, treble via FRENETIK Adjust software • Temperature monitoring • No logo on the front
Technical data:
Type: Amplified 2-way coaxial ceiling speaker, Dante™ PoE+ Power (passive mode): 40 W (8 ohms) Amplification: 60 W (class D) Dante™ Receiver: 1 (16 / 24 / 32 bit - 44.1 à 96 kHz) Transducers : 1 x 8" woofer / 1 x 1" tweeter Peak SPL capacity (1 m): 110 dB Bandwidth (-10 dB): 100 Hz - 16 kHz Directivity (H x V): 100° x 100° Connection: 1 x RJ45 (Dante™ active mode) + 1 Euroblock (passive mode) Cut out diameter: : Ø 240 mm Power: PoE+ (IEEE 802.3 at) Dimensions: Ø 272 x P 187 mm Weight: 3.10 kg
Compact amplified subwoofer, Dante™ processed, PoE+ • Latest generation 60 W class D amplifier board with integrated DSP • Omnidirectional • Wooden cabinet - Euroblock connector for use with external amplification • Base plate for coupling with SPIK 6 (with SMP tube) • Remote control of volume, bass, treble via FRENETIK Adjust software • Board temperature monitoring • No logo on front panel
Technical data: Type: Amplified Sub, Dante™ PoE+ Power (passive mode): 150 W (8 ohms) Amplification: 60 W (class D) Dante™ Receiver: 1 (16 / 24 / 32 bit - 44.1 à 96 kHz) Transducers: 1 x 8" woofer Peak SPL capacity (1 m): 119 dB Bandwidth (-10 dB): 40 Hz - 100 Hz Input connectors: 1 x RJ45 (Dante™ active mode) + 1 Euroblock (passive mode) Top plate : for SMP tube Insert : no Power supply: PoE+ (IEEE 802.3 at) Dimensions: 330 x 290 x 400 mm Weight: 12.00 kg
Compact coaxial wide-aperture speaker, Dante™ processed, PoE+ • Last generation 60W class D amplifier board with integrated DSP • Wide and homogeneous directivity 85° x 85° • Wooden cabinet • Euroblock connector for use with external amplification • Cut-out cabinet for wedge applications • Well for coupling with SPIK SUB ( with SMP tube) • Remote volume control, bass, treble via FRENETIK Adjust software • Board temperature monitoring • No logo on front panel
Technical data:
Type: Amplified 2-way coaxial loudspeaker,Dante™ PoE+ Power (passive mode): 100 W (8 ohms) Amplification: 60 W (classe D) Dante™ Receiver: 1 (16 / 24 / 32 bit - 44.1 à 96 kHz) Transducers: 1 x 6" woofer / 1 x 3" tweeter Peak SPL capacity (1 m): 114 dB Bandwidth (-10 dB): 75 Hz – 18 kHz Directivity (H x V): 85° x 85° Input connectors: 1 x RJ45 (Dante™ active mode) + 1 Euroblock (passive mode) Wedge applications: yes Pole mount: 35 mm Power supply: PoE+ (IEEE 802.3 at) Dimensions: 304 x 248 x 236 mm Weight: 6.00 kg
Compact 2-way coaxial wide-opening amplified processor speaker, Dante™ PoE+ • 60W class D amplifier board with integrated latest generation DSP • Wide and homogeneous directivity 95° x 95° • Wooden cabinet • Euroblock connector for use with external amplification • Remote control of volume, bass, treble via FRENETIK Adjust software • Board temperature monitoring • No logo on front panel
Technical data : Type: Amplified 2-way coaxial speaker, Dante™ PoE+ Power (passive mode): 60 W (8 ohms) Amplification: 60 W (classe D) Dante™ Receiver: 1 (16 / 24 / 32 bit - 44.1 à 96 kHz) Transducers: 1 x 5" woofer / 1 x 1" tweeter Peak SPL capacity (1 m): 112 dB Bandwidth (-10 dB): 90 Hz – 20 kHz Directivity (H x V): 95° x 95° Input connectors: 1 x RJ45 (Dante™ active mode) + 1 Euroblock (passive mode) Insert: 4 x M6 Power supply: PoE+ (IEEE 802.3 at) Dimensions: 165 x 165 x 193 mm Weight: 2.50 kg
Amplified speaker system, 2-way 3″, Dante™ PoE+ Ultra compact 2-way powered aluminium speaker system – Dante™ and PoE+ • 60W class D amplifier card with integrated programmed DSP • Wide and homogeneous directivity 95° x 85° • Remote control of volume, bass and treble via FRENETIK Adjust software • Temperature monitoring of the card • No logo on the front panel. Available in Black or White. Technical data: • Ref.: SP30DP (black) | SP30DP-W (white) • Type: 2-way amplified speaker, Dante™ PoE+ • Amplification: 60 W (class D) • Dante™ Receiver: 1 (16 / 24 / 32 bit - 44.1 à 96 kHz) • Transducers: 1 x 3" woofer / 1 x 3" tweeter • Peak SPL capacity (1 m): 109 dB • Bandwidth (-10 dB): 125 Hz - 20 kHz • Directivity (H x V): 100° x 100° • Input connector: 1 x RJ45 • Insert: 2 x M10 • Power supply: PoE+ (IEEE 802.3 at) • Dimensions: 205 x 95 x 117 mm • Weight: 2.40 kg • Packaging: per pair
Designed primarily for switching between monitoring systems the NMS802 is a Dante enabled PoE Network Monitor Switch with one Dante stereo input, one stereo analogue input, eight Dante stereo outputs and one analogue stereo output. The unit includes up to eight frames of programmable stereo delay plus cut, dim and a volume control. There are also two GPI inputs for remote control of cut and dim. The NMS802 has many features that may be programmed via its web page including key colours, delay time, input and output gains and remote control of functions. For convenience of adjustment the delay time may also be set using just the front panel controls as well as via the web page. The unit includes a redundant network connection which may alternatively be used as a network switch output. The Dante Left and Right inputs are mirrored on the rear of the NMS802 as balanced XLR analogue inputs. One of the outputs may be selected as analogue available on the rear. The unit may be powered by mains or PoE or both.
The DIO1600 is a Dante enabled interface converting sixteen analogue line level inputs and sixteen analogue line level outputs to the audio network. All inputs and outputs have adjustable gain from +12dB to -12dB. The XLR version may be specified with XLRs on the front, network connections on the rear or XLRs on the rear, network connections on the front. It can also be supplied in a 1RU format with Tascam standard audio connections similar to the DIO1616MA below. Network connections may be copper and/or fibre via two SFPs and the unit includes secondary ports for network redundancy. The DIO1600 is PoE enabled so may be operated without a mains supply if required. The unit also has a 100-240V AC mains inlet and also supports 12 volt operation so may be effectively used with a redundant power supply. All level controls are adjusted using the built in web server. The unit will operate at sample rates of 48kHz and 96kHz and may also be used in AES67 mode.
MNS-DANTE-I2S-TR-XX-1P DANTE I2S AUDIO RECEIVE / TRANSMIT MODULE [ Dante to I2S and I2S to Dante ], Which can be easy integrated into your products. Create a unique selling proposition and differentiate your product with rapid and flexible customization. [Model:MNS-DANTE-I2S-R-01-1P]: For networked audio receiver products requiring 1 channels at 44.1 kHz, 48kHz, 88.2kHz and 96kHz [ 16, 24 or 32-bit ] sample rates.
MNS-DANTE-I2S-TR-XX-1P DANTE I2S AUDIO RECEIVE / TRANSMIT MODULE [ Dante to I2S and I2S to Dante ], Which can be easy integrated into your products. Create a unique selling proposition and differentiate your product with rapid and flexible customization. [Model:MNS-DANTE-I2S-T-01-1P]: For networked audio transmitter products requiring 1 channels at 44.1 kHz, 48kHz, 88.2kHz and 96kHz [ 16, 24 or 32-bit ] sample rates.
MNS-DANTE-I2S-TR-XX-1P DANTE I2S AUDIO RECEIVE / TRANSMIT MODULE [ Dante to I2S and I2S to Dante ], Which can be easy integrated into your products. Create a unique selling proposition and differentiate your product with rapid and flexible customization. [Model:MNS-DANTE-I2S-R-02-1P]: For networked audio receiver products requiring 2 channels at 44.1 kHz, 48kHz, 88.2kHz and 96kHz [ 16, 24 or 32-bit ] sample rates.
The Model 5422A is suitable for use in fixed and mobile broadcast facilities, post-production studios, commercial and educational theater environments, and entertainment applications. Only power and Ethernet network connections are required for the Model 5422A to provide a powerful resource in a variety of Dante applications. The Model 5422A is available in two versions – one with 32 input and output channels and the other with 64 input and output channels. • Dante audio-over-IP technology with AES67 and DDM support • Creates multiple virtual party-line (PL) intercom circuits • Special audio functions including summing, IFB, and audio switching • Auto Mix for enhanced audio performance • Perfect for REMI/At-Home production applications • Two versions available: one or two 32-channel audio engines • Three Gigabit Ethernet interfaces support independent redundant Dante and management networks • Webpage management and USB flash drive software updating • AC mains and 12 volts DC powering • Lightweight enclosure, single rack-space (1U) mounting
The Model 5402 provides the PTP v1 (IEEE 1588-2002) compatibility required by Dante. Supports PTP v2 (IEEE 1588-2008) for AES67 applications. Includes an integrated GNSS (satellite) receiver to allow a precise timing reference to be acquired from the four major constellations. A sync input connection allows the Model 5402's internal oscillator to be synchronized with a variety of external timing and reference signals. A word clock output provides a general-purpose timing reference for use by external devices. Key Features • Integral GNSS (satellite) receiver for nanosecond-level timing accuracy • Supports GPS (USA), Galileo (Europe), BeiDou (China), and GLONASS (Russia) • Dedicated Leader clock for Dante audio-over-IP, AES67, ST 2110, and DDM applications • High-performance IEEE 1588 PTP v1 and v2 servers • Allows synchronization of audio between multiple sites • Word clock output with selectable rates • Eight configurable audio tone signals • Three Gigabit Ethernet interfaces support independent redundant Dante and management networks • Webpage management and USB flash drive software updating
The Model 5401A provides the PTP v1 (IEEE 1588-2002) compatibility that's required by Dante. In addition, the unit supports PTP v2 (IEEE 1588-2008) for AES67 applications. A word clock output provides a general-purpose timing reference for use by external devices. The Model 5401A also generates eight sine-wave audio tones on Dante transmitter (output) channels which can be useful during audio network installation, maintenance, and operation. A sync input connection allows the Model 5401A's internal oscillator to be synchronized with a variety of timing and reference signals.
Key Features • Dedicated Leader clock for Dante audio-over-IP and AES67 applications • High-performance IEEE 1588 PTP v1 and v2 servers • Internal temperature-stabilized frequency reference • Compatible with external word clock, video sync, and 10 MHz sources • Word clock output with selectable rates • Eight configurable audio tone signals • Three Gigabit Ethernet interfaces support independent Dante and management networks • Webpage management and USB flash drive software updating
- 2 x MADI I/Ontp-penta-720-io-cards-madi-2 - 2 x 64 channels - 8 cards = 1024 channels - Built-in Sample Rate Converter on input - Choice of physical interface - Select type of SFP module - Optical, MM or SM - Coax - Redundant mode - Auto switch-over in case of signal loss
- 128 Channels in and out ntp-penta-720-io-cards-128-dante-2 - 8 cards = 1024 channels - Built-in Sample Rate Converter - Enables connection between unsynchronised - Dante/AES67 networks - Enables connection between networks with different sample rates - Support for Dante Domain Manager - Support for AES67 with SAP - Network delay setting up to 21 msec -128 full streams of Dante connectivity
Analog Input Two card types (Cards are physically identical). LINE card can be upgraded to MIC/LINE by license.
8 ch. LINE input 8 ch. MIC/LINE input – Features… Phantom power Mic pre gain Phase invert Selectable max. line input level +9 dBu to +30 dBu in steps of 0.1 dBLong Product Description (150 words or less): AD conversion for the DAD and Penta module product lines.
Penta - Audio Delay Processor SPQ Card serves different functions for DAD Ax32, Penta 720 and 721s, based on different software:
The programmable delay for up to 128 ch. Individual delay pr. channel 128 ‘channel-seconds of delay’ 128 ch. can be delayed up to 1 sec. 1 ch. Can be delayed up to 128 sec. Or any combination in-between Delay can be set in steps of 1 sample Suitable to achieve lipsync
You can add a wide variety of optional I/O cards to the modular Penta 721s and Penta 720. Once you start mixing and matching up to 8 card slots, you will find that the system is extremely flexible and therefore may be tailored to fit any audio-routing and/or conversion task imaginable.
ModularDual MADI Module 2 x MADI I/O 2 x 64 channels Choice of physical interface Select type of SFP module Optical, MM or SM Coax Redundant mode Auto switch-over in case of signal loss Can operate as dual HotLink 2 x 128 ch.
In a world that seems to be gradually moving towards working and mixing 'in the box', there are still situations where hands-on control is second to none.
Monitor control is one of those cases. Enter MOM - our Monitor Operating Module.
MOM is the perfect, tactile match for one or more AVID MTRX, AVID MTRX Studio, AX32, DX32, Penta 720, and Penta 721s units equipped with the PRO|MON|3 monitor control license. The MOM is a remote control, connected via Ethernet, and no audio is actually passing through the unit. The audio-routing magic happens within the AX32 or DX32R and is set up via the DADman software. But once you connect the MOM, the magic now resides right at your fingertips. Main Features: MOM will give you everything you would expect from a first-grade hardware monitor-controller:
Large Top-Quailty Rotary Knob Switching Between Different Sources Switching Between Different Monitor Configurations (from Mono to Atmos) Mute/Solo Individual Monitor Channels Talkback Dim Cut Reference Level
Third party applications that use Dante Ready™ allow customers to purchase and activate Dante audio channels after installation using the Dante Activator tool in Dante Controller 4.5 or higher. Dante Activator is tied to an active Audinate user account and accepts standard credit card payments.
