Cart
← Back to Product Catalog

FRENETIK – Spik Sub

Speakers

More details

Similar Products

soundtube-IPD4-CM62-BGM_1200px|soundtube-IPD4-CM62-BGM_1200px
  • SoundTube

SoundTube – IPD4-CM62-BGM

The IPD4-CM62-BGM is a 6.5-inch in-ceiling Dante speaker with connection and power for up to three additional non-Dante SoundTube speakers. The IPD4-CM62-BGM gives integrators an economical way to expand in-ceiling speaker zones on a Dante network. This speaker incorporates a 6.5-inch (165 mm) polypropylene woofer with rubber surround and 1-inch (25 mm) silk dome tweeter in a ported steel backcan. In addition to its PoE connection to the SoundTube STNet Switch, the IPD4-CM62-BGM can power up to three additional non-IP speakers. Each IPD4 speaker can be broken down into 2 channels; IPD4 speakers are matched in a system with standard passive SoundTube speakers of the same type. All IPD4 speakers come in both an active and a passive version. As with SoundTube's other IPD in-ceiling speakers, IPD4 speakers feature BroadBeam Ring technology for broad, even dispersion of high frequencies and include SoundTube's exclusive SpeedWing quick-mounting technology.
    Speakers
See the product
MLA208a
  • DMIX

DMIX – MLA 208a

Speaker model: MLA 208a

Speaker type: Dual 8 "dichotomous active line array loudspeakers

Unit configuration: LF: 2×8"woofer 2"(50mm) Voice coil

HF: 2×1.4"(34mm) Voice coil high frequency driver

Frequency response: 75Hz-19kHz (-10dB)

Rated power: LF: 300W , HF: 60W

Sensitivity: LF: 98dB , HF: 107dB

Sound pressure level： 130dB (peak)

Radiation Angle: 110°×10° (adjustable)

Crossover point: DSP control

Size (mm) : 740×259×416 (W×H×D)

Module amplifier power: HF：300W，LF：1000W (Class D)/8Ω

Module input link: 2 balanced XLR inputs or 2 AES inputs or a set of Dante signal inputs and outputs

Module DSP control: RS485、USB or Dante

    Speakers
See the product
worxaudio-waveseries-218S_600px|worxaudio-waveseries-218S_600px
  • WorxAudio

WorxAudio – WaveSeries 218S

The 218S is a high performance bass reflex loudspeaker, designed to extend the low frequency response of WaveSeries loudspeaker systems to 31Hz. It has dual long excursion eighteen-inch cone driver in a tuned enclosure, providing extended response with extremely low distortion. The 218S is a high performance bass reflex loudspeaker, designed to extend the low frequency response of WaveSeries loudspeaker systems to 31Hz. It has dual long excursion eighteen-inch cone driver in a tuned enclosure, providing extended response with extremely low distortion. The 218S is ideally suited for music reproduction and operates as a low frequency section in conjunction with other mid – high enclosures, or as a sub bass section for any loudspeaker system requiring enhanced low frequency performance. The sturdy multi-ply plywood enclosure, with a catalyzed polyurethane finish, is designed to withstand the most demanding portable applications. A perforated, powder coated steel grill with a high transmission ratio offers excellent protective properties. The 218S can be purchased in two versions. The portable configuration has large recessed handles, rigid casters, and a mid – high pole receptacle, while the installation version can be fitted with a variety of flyware. Both are available in white, black or unfinished exterior. The 218S loudspeaker is designed to satisfy a wide variety of low frequency audio applications and offers extraordinary performance and value.
    Speakers
See the product