Cart
← Back to Product Catalog

WorxAudio – WaveSeries 218S

Speakers

More details

Similar Products

PK-828A+Dante-1
  • Magnetic

Magnetic – PK-828A+Dante

Model:PK-828A+Dante
LF Unit:8" x2(neodymium)
HF Unit:1.75"x1(neodymium)
Cabinet and paiting:Birch of plywood and Polyurea
Frequency Response:55Hz-18KHz(±3dB)
Nominal Impedance:LF 4ohm,HF 8ohm
Input Sensitivity:108dB (1W/1m)
AES Power:800W LF,70W HF
Peak Power:1600W LF,100W HF
Max SPL:132dB
Input Connector:1xXLR female+1xXLR male1xVolume,1xpreset,USB,Dante
Amplifier @THD1%RMS:800Wx800W@4ohm
DSP:96KHz sample rate,floating point DSPPhase,All past filter,12 EQ,Crossover,Limiter1000ms for each input and outputDriver freeAPP for IOS/Androi(new version)
Dante:Yes
WIFI:Ethernet by TCP/IP
Standby and Green energy:Yes(<0.9W)
Working Voltage:85-265V,with PFC
Dimensions(WxDxH):280x335x693mm
Weight:23kg
    Speakers
See the product
soundtube-IPD4-CM62-BGM_1200px|soundtube-IPD4-CM62-BGM_1200px
  • SoundTube

SoundTube – IPD4-CM62-BGM

The IPD4-CM62-BGM is a 6.5-inch in-ceiling Dante speaker with connection and power for up to three additional non-Dante SoundTube speakers. The IPD4-CM62-BGM gives integrators an economical way to expand in-ceiling speaker zones on a Dante network. This speaker incorporates a 6.5-inch (165 mm) polypropylene woofer with rubber surround and 1-inch (25 mm) silk dome tweeter in a ported steel backcan. In addition to its PoE connection to the SoundTube STNet Switch, the IPD4-CM62-BGM can power up to three additional non-IP speakers. Each IPD4 speaker can be broken down into 2 channels; IPD4 speakers are matched in a system with standard passive SoundTube speakers of the same type. All IPD4 speakers come in both an active and a passive version. As with SoundTube's other IPD in-ceiling speakers, IPD4 speakers feature BroadBeam Ring technology for broad, even dispersion of high frequencies and include SoundTube's exclusive SpeedWing quick-mounting technology.
    Speakers
See the product
fohhn-DLI-130_1200px|fohhn-DLI-130_1200px
  • Fohhn

Fohhn – Linea Focus DLI-130 DAN

The active, electronically inclinable DLI-130 DAN line source speaker enables intelligent and target-oriented sound coverage in venues that have the most difficult acoustic conditions. Using intuitive software, both the vertical dispersion characteristics and the inclination angle of the loudspeaker beam can be precisely adjusted – in real time – to perfectly suit to the room’s acoustic situation. The Linea Focus DLI-130 DAN is a high performance line source system, which can be electronically controlled and monitored. The system is equipped with eight state-of-the-art Class D amplifiers and DSP technology specially developed for this area of application, plus eight coated 4” long excursion drivers. This perfect balance of amplifier-, digital signal processor- and loudspeaker technology enables a maximum SPL of 124 dB to be achieved. The DLI-130 DAN comes with a digital input interface for DANTE. The loudspeaker’s vertical beam dispersion characteristics can be intuitively controlled – in real time – using FOHHN AUDIO SOFT: The vertical beam width, ranging from 0° to 90°, and vertical inclination angle, ranging from -40° to +40°, can both be adjusted in precise 0.1° increments. This means that unwanted reflections from floors and ceilings can be avoided. The result: optimum levels of speech intelligibility, a pleasing sound image and excellent sound quality – even in the most challenging acoustic conditions.
    Speakers
See the product