Cart
← Back to Product Catalog

NTP Technology – Dante Brooklyn 2 / ASE67

AV Encoders & Decoders

More details

Similar Products
  • AMX

NMX-DEC-N3322D

4K60 H.26x/Dante AV-H Decoder AMX SVSI NMX-DEC-N3322D decoders can decode the highest quality 4K60 H.26x and Dante AV-H video streams output by AMX N3300 encoders or other Dante AV-H cameras, digital signage players, or software. · High-quality 4K60 H.26x Decoding · Audinate® Dante AV-H support · Dante Audio · Support for high security networks · PoE+ powered with low-power mode for energy savings
    AV Encoders & Decoders
See the product
  • Tieline the Codec Company

Tieline Gateway

The Gateway is a DSP-based IP codec which can transport 16 channels across the public internet and any QoS-enabled IP network. It can route compressed and uncompressed IP audio streams throughout the broadcast plant with native support for AES67, ST 2110-30, ST 2022-7, RAVENNA, Livewire+, AMWA NMOS IS-04 and IS-05, Ember+, AES3 and analog I/O as standard. An optional Dante or WheatNet-IP card is also available. This facilitates acting as a media converter to simplify audio routing between a range of equipment using proprietary AoIP protocols like WheatNet-IP, Dante and Livewire, plus devices supporting RAVENNA, AES67 and ST 2110-30. It supports 16 full-duplex audio channels as well as multiple unicasting to 80 endpoints and multicasting. Transport of phase-locked multichannel audio in 5.1 or 7.1 formats is also supported. Configure with the built-in embedded HTML5 Toolbox Web-GUI interface or
    AV Encoders & Decoders
See the product
  • Bolin Technology

Dante AV Ultra Transceiver D20H

Bolin’s D20 Series Dante AV Ultra transceiver device can be programmed as an encoder or a decoder via firmware update. D20 Series is a single channel networked AV over IP transceiver that is fully compatible with Dante audio devices within a Dante ecosystem for HDMI sources up to 4K60Hz 4096 x 2160, with embedded audio and PTZ camera movement control via IP or IR pass-through. It provides audio and video streaming over a standard gigabit network and D20S/D20H models as decoders output baseband video, either HDMI or 12G SDI, to work in professional AV applications. D20H has HDMI 2.0 output only, which provides decoded image to output via HDMI 2.0. Integrated high-performance scaling engine provides scalable encoded source for a wide array of UHD, HD resolutions to match the different capabilities and requirements of sources, displays, codecs, and other equipment.
    AV Encoders & Decoders
See the product