Product Information
AES Interface Card
8 x AES I/O
– 16 channels in and out
– 8 cards = 128 channels in and out
– Built-in Sample Rate Converter on input
– Sample rates from 44.1 to 192 kHz
Specifications
- Dante Ch: 64x64
- AES67 Enabled
NTP Technology – AES3 / AES67
Similar Products
- TiGHT AV
TNET-ENC-C211-DA Encoder
The TNET-ENC-C211-DA is an innovative encoder that builds on our H101-DA by adding the convenience of a USB-C port with 100W Power Delivery (PD).
The TNET-ENC-C211-DA is equipped with a host of features that make it ideal for streaming high-resolution content over a network. It supports 4K60 1G Ethernet with subframe latency, dual LAN ports with PoE+ pass-through, a USB host port, HDMI loop output, 2x2 CH Dante Audio and audio embedding/de-embedding. The TNET-ENC-C211-DA is also easy to install and troubleshoot. It features a built-in LED display that provides information such as IP address, and it offers a variety of management and control options, including a built-in WEB UI, an open direct-control API, compatibility with Dante Control & DDM, and proprietary software for management and mass deployment.
Key Features:
· USB-C port with 100W PD
· 4K60 1G Ethernet with subframe latency
· Dual LAN ports with PoE/PoE+ pass-through
· VLAN tagging support
· USB host port
· HDMI loop output
· Audio embedding/de-embedding
· 2x2 CH Dante Audio break-in/out
· LED display for easy installation and troubleshooting
· Video Wall up to 16x16 with Mosaic configuration support
· USB 2.0 transport and routing/ Mouse Roaming in Video Wall mode
· Built-in WEB UI for configuration and setup
· Open direct-control API
· Compatible with Dante Controller & Dante Domain Manager
· Proprietary software for management and mass deployment
- AV Encoders & Decoders
- Dante Ch: 4x4
- 24-bit
- NTP
NTP Technology – Dual MADI Module w SFP/ Mini BNC options
You can add a wide variety of optional I/O cards to the modular Penta 721s and Penta 720. Once you start mixing and matching up to 8 card slots, you will find that the system is extremely flexible and therefore may be tailored to fit any audio-routing and/or conversion task imaginable.
ModularDual MADI Module
2 x MADI I/O
2 x 64 channels
Choice of physical interface
Select type of SFP module
Optical, MM or SM
Coax
Redundant mode
Auto switch-over in case of signal loss
Can operate as dual HotLink
2 x 128 ch.
- AV Encoders & Decoders
- ZenWin
ZW-B404
Features
- Microphone/line input: 4 x balanced audio inputs.
- Line output: 4x balanced audio output.
- Dante：1 x Dante ® Ethernet interface connector, supporting POE power supply; 1 x Dante ® Ethernet interface connector; Two interfaces implement data exchange function.
- DC 12V: A DC connector used for connecting DC 12V1A power adapters.
- Input interface: 4-channel microphone/line input,
- 3-pin green wiring terminal Output interface: 4-channel line output,
- 3-pin green terminal block Gain: Input: 0~+48dB, 6dB per step;
- Output: -60~0dB,
- 1dB per step Maximum level: Input:+18dBu @ 0dB input gain;
- Output:+18dBu @ 0dB output gain
- Input impedance:>1.8k Ω Effective
- Input Noise (EIN): -119dB @ 48dB gain
- Effective output noise:<-79dBu @ 0dB gain
- Harmonic distortion:<0.05%
- Sampling rate: 44.1kHz or 48kHz
- AV Encoders & Decoders
- Dante Ch: 4x4
- 24-bit