Pinanson's Press Splitter SA SMC DANTE is a Press Splitter with Dante input plus analogue audio.
Features
Models
Mezzo offers the same sound clarity, reliability, and overall build quality of any Powersoft install dedicated amplifier platform in a ½ rack unit form factor. It comes in 2 power supply sizes, 2 or 4 channels, and state of the art DSP.
All models offer multiple analog input options, and the 2 channel versions feature line level outputs.
AD versions of Mezzo add audio networking capabilities with DanteTM/AES67 and an internal Gigabit Ethernet switch and a second port so that multiple products can share the same network cable.
The smaller versions of Mezzo are sealed designs, therefore approved for hidden placement, such as mounted above the ceiling or tucked in a wall box.
The included mounting accessories allow multiple options: 1 or 2 Mezzo in a 19” Rack, 1 Mezzo in an 11” rack, wall mount brackets allow it to be mounted on any flat surface, also under a table or in the ceiling. Rubber feet allow Mezzo to be placed on a shelf.
Dante-enabled models:
A terrific complement for any full-range loudspeaker and the perfect companion for the PreSonus® CDL12 Constant Directivity loudspeaker, the CDL18s delivers a tight, coherent low-end, driven by an integrated 1000-watt Class D power amp, and features a unique ported design that maximizes efficiency in a compact form-factor. The Dante®-enabled CDL18s provides the articulate sub-bass frequency reproduction demanded by audio professionals thanks to its custom 18-inch low-frequency transducer with 4-inch voice coil, providing 7 mm of driver travel before over-excursion to move more air for a low-end punch you can feel. When flown together in a vertical array, or combined for ground-stacked applications, the CDL18s and CDL12 form a complete, coherent loudspeaker system with an even response across the frequency spectrum.
The AoDoM 2 channel provides one RJ45 Dante input and two Neutrik NC3MXX-BAG series black XLR analog outputs. Using our rugged aluminum extrusion channels and hand soldered, 3 ft. analog audio tails, ProCo AoDoM modules provide simple connection of analog equipment to a Dante network and provide studio-quality, low-latency audio via the XLR connectors. Comaptible with any Dante ecosystem and provides line level analog audio signal to output devices.
The DANTEx is an optional plug-in card for the Rane Terminal 1010x that allows system designers to integrate a Terminal 1010x processor with Dante-equipped microphones, amplifiers, breakout boxes, mixing consoles and other supported devices. It provides 32 inputs and 32 outputs of Dante digital audio with supported samples rates of 44.1kHz, 48kHz, 88.2kHz and 96kHz. Built-in sample rate conversion (SRC) converts the Dante sample rate to the fixed 48kHz sample rate required by the Terminal 1010x.
The Dante interface is managed using Audinate’s Dante Controller software. Dante controller is a free software application that enables the user to route and configure devices on a Dante network.
The Terminal 1010x takes the DSP Experience to the next level with an intuitive front-panel that enables users to control 10 analog balanced inputs for Mic/Line/+48V and 10 balanced outputs. There are also 6 flexible RAD Plus PoE ports to connect breakout boxes and wall plate remote controls and 4 Universal GPIO logic ports for external devices such as alarm systems, sensors, lights, projectors, etc. There is also a slot for an optional DANTE™ 32x32 card for network connectivity.
A HAL1x Multiprocessor supports 16 in x 16 out audio, with 8 in x 8 out on balanced analog connections, and another 8 in x 8 out through RADs. It is unique among the HAL Multiprocessors because it carries an Expansion Bus, which can increase the I/O up to 512 in x 512 out by adding up to 32 daisy-chained Expanders to a single HAL1x. A few to hundreds of more gain-sharing mic inputs are possible with AM Automixers. HAL1x's DSP brain has over 5 times the DSP horsepower of the popular Rane RPM 88.
The P-Series from Renkus-Heinz represents the pinnacle of performance for compact point-source loudspeakers. Latest generation Complex Conic horn geometry coupled with patented CoEntrant Mid/High driver technology delivers uncompromising detail and extreme sound pressure levels. Advanced amplification, processing, and protection through RH’s own SA Amplifiers provide the ultimate in performance, consistency, and reliability. Application focused loudspeakers and comprehensive accessory packages have been purposefully designed to address the acoustical and logistical challenges of live sound reinforcement from mains and fills, to stage and control room monitoring.
Dante-enabled P Series Models:
The ARNI (Audio Routed Network Interface) G2 component of an OMNEO system enhances the scalability of the system by its ability to act as a DHCP (Dynamic Host Configuration Protocol) server which eliminates the need to use the IPv4LL protocol. As a DHCP server, ARNI G2 supports one (1) subnet when there is no DHCP server available. It can act as a DNS (Domain Name System) server, storing the DNS-SD (Domain Name System-Service Directory) records of nodes and responding to controller queries, meaning standard DNS can be used for DNS-SD and name resolving. ARNI G2 also extends the use of PTP (Precision Time Protocol) over multiple IP (Internet Protocol) subnets by acting as a boundary clock, synchronized to a master clock using unicast PTP and acts as the clock master in its own subnet using multicast PTP to synchronize the OMNEO nodes.
The KP-4016PB is a 16-Position HD Color Display Keypanel with pushbutton that delivers superior high-quality digital audio using the Bosch-branded OMNEO technology with Dante by Audinate audio over IP via either copper or fiber. The KP-4016PB delivers top-notch audio, free of noise, delay, and other artifacts present in older technology. This family of keypanels includes a rich set of connectors as standard, including GPIO and RC. As with other RTS products, emphasis has been placed on backward compatibility with previous generations of matrices including analog technology.
The KP-4016PB keypanel utilizes the latest generation of wide angle TFT displays providing superior clarity, resolution, and longer display life, delivering high-quality readability under a variety of lighting conditions.
The KP-5032PB is a 32-Position HD Color Display Keypanel with pushbutton that delivers superior high-quality digital audio using the Bosch-branded OMNEO technology with Dante by Audinate audio over IP via either copper or fiber. The KP-5032PB delivers top-notch audio, free of noise, delay, and other artifacts present in older technology. This family of keypanels includes a rich set of connectors as standard, including GPIO and RC. As with other RTS products, emphasis has been placed on backward compatibility with previous generations of matrices including analog technology.
The KP-5032PB keypanel utilizes the latest generation of wide angle TFT displays providing superior clarity, resolution, and longer display life, delivering high-quality readability under a variety of lighting conditions.
The AVN-AO16 audio converter and interface converts up to sixteen analogue outputs from the Dante Audio-over-IP networking standard. This cost effective 1U rack-mount unit offers an easy solution for AV professionals and system integrators. It is simple to configure and operate, with all set-up done via the standard Dante Controller software and power via PoE (Power Over Ethernet).
All analogue outputs are on high-quality Neutrik XLR connectors and there are front panel status/confidence LEDs for POE, Link, and Clock.
The AVN-DIO01 is a Dante AoIP network to analogue XLR stereo output converter in the Sonifex DIO range of Dante input/output devices. It features two balanced analogue XLR outputs and one Neutrik EtherCon® connector for direct connection to a Dante AoIP network. The D/A circuitry offers >120dB of dynamic range - ten times better than similar competing products.
All Sonifex DIO interfaces provide a simple, convenient, and elegant plug and play method of connecting legacy analogue and digital audio equipment to the Dante AoIP audio network.
All DIO products use Dante Controller for configuration and are powered by PoE (Power over Ethernet). They use rugged aluminium boxes with side slots for screw-mounting and contain superior audio circuitry for optimal audio performance. All feature rugged Neutrik EtherCon® connectors and Neutrik lockable audio connectors for ultra-reliable connectivity.
SoundTube Entertainment’s IPD-Hub 2 Amplifier creates an IP-based audio distribution alternative to traditional 70v or 100v audio systems. Designed for small to medium applications, the IPD-Hub 2 combines Attero Tech Axiom endpoints with Dante infrastructure to create a complete IP-based system at a comparable price point to traditional 70v or 100v systems. The IPD-Hub 2 features two-channel DSP amplification with a multitude of power options, including PoE, PoE+, 40W PoE and 24v PS.
The Model 372A Intercom Beltpack is a highly compact user-worn device that combines a single channel of talk and two channels of listen. The unit begins with the features offered by traditional analog party-line (PL) intercom user devices and adds a range of new capabilities, along with the advanced performance and flexibility that Dante® audio-over-Ethernet provides. Over a standard IP network, multiple Model 372A and other compatible Studio Technologies' beltpack units can be used to create party-line intercom applications with help from an external Dante-enabled audio matrix such as the Studio Technologies' Model 5422 Dante Intercom Audio Engine. Alternately, Model 372A units can be used "point-to-point" or interfaced with Dante-compatible matrix intercom systems.
Key Features
The Model 373A Intercom Beltpack is a highly compact user-worn device that combines a single channel of talk and two channels of listen. The unit begins with the features offered by traditional analog party-line (PL) intercom user devices and adds a range of new capabilities, along with the advanced performance and flexibility that Dante® audio-over-Ethernet provides. Over a standard IP network, multiple Model 373A and other compatible Studio Technologies' beltpack units can be used to create party-line intercom applications with help from an external Dante-enabled audio matrix such as the Studio Technologies' Model 5422 Dante Intercom Audio Engine. Alternately, Model 373A units can be used "point-to-point" or interfaced with Dante-compatible matrix intercom systems.
Key Features
Since TAIDEN introduced the world's first digital infrared wireless conference system in 2008, its HCS-5300 Series Digital Infrared Wireless Conference System has successfully equipped the United Nations Headquarters, the World Bank, the Business Roundtable Headquarters, the China National Convention Center, the Ningxia International Convention Center, Chongqing Municipal Government and many other high-profile venues.
Now TAIDEN extends its portfolio of wireless conferencing solutions by launching a compact complement, HCS-5335 Series Compact Digital Infrared Wireless Conference System. Its performance stays true to its predecessor but features ingenious integration by combining the transceiver and the control unit together. No changes or further holes need to be made in the meeting rooms to be equipped thanks to its wireless transmission of audio signals and tabletop/on-tripod installation of the new main unit, making the system an ideal solution for small to medium sized multipurpose rooms or historical buildings.
The HPA-160D/02 is a Digital audio power amplifier. Its a compact and efficient combination of digital power amplifier and switching power supply.
Taiden's HCS-8300 Series is the first Paperless Multimedia Congress System in the world. It is especially designed for high-level meetings, such as summits, congresses, conventions, parliaments and city councils
Блок представляет собой звуковой интерфейс локальной сети распространения AoIP сигналов по протоколу Dante.
Блок представляет собой звуковой интерфейс локальной сети распространения AoIP сигналов по протоколу Dante. Он может иметь различное количество входов и выходов нескольких форматов.
Опциональные модули:
Specifically designed for use where operators need to create a custom mix from a DANTE stream. With powerful user features accessible via the web UI, the MPA1 Dante is simple to use and flexible enough to meet specific and demanding workflow requirements.
Features
In today’s world of network savvy customers, organizations are placing increasing importance on ensuring their critical Network AV systems are available and performing acceptably.
Introducing PacketAV™ Sentinel – Network AV monitoring simplified by Visionary.
Sentinel offers a number of benefits for organizations, improving efficiency by ensuring that time is not wasted waiting for problems to be reported, but is more usefully spent on resolving issues. This proactive approach to Network AV monitoring allows issues to be identified before they impact end users and cause disruptions. This increases system up-time and reliability. As a result, user satisfaction is significantly improved.
Sentinel represents an opportunity for integrators to offer new services, including scalable service programs, and developing sustainable revenue streams.
The Sentinel service uses a local agent to communicate with Network AV devices in the system. It can then interact with local or cloud systems for reporting and logging, as well as API based integrations.
Sentinel is competitively priced and can scale from small, standalone systems to global enterprises.
PacketAV Duet is nothing short of a paradigm shift for networked AV. True convergence is finally here; a single platform to support Dante™/AES67 and Video over IP. Integrate 4K UHD video over IP into your Dante™ enabled audio network and bypass the constraints of traditional switch matrix systems by harnessing the flexibility and scalability of converged IP networks.
This is video for audio professionals.
The PacketAV Duet Wallplate Encoder provides powerful 4K UHD Video and Dante/AES67 Audio encoding over Gigabit Ethernet in a convenient wallplate form-factor. It can be easily mounted in a wall, tabletop, lectern, or floor box using a standard 2-gang US or UK back box, and connected to power (standard POE) and Ethernet using only a single category cable.
Visionary’s PackeTV® and PacketAV® products can be deployed on any industry standard IP network. They can be used on existing enterprise IP networks or a physically separate parallel network [private network] to offload traffic, using the same network protocols, methods, and devices but without intermingling of video traffic with data or voice; with equal ease of installation.
Applications
The es-269V subwoofer brings a full arsenal of VUEDrive electronics inside the cabinet of VUE’s popular es-269 ACM subwoofer. The “V” version offers 2000W of internal amplification, making it the ultimate Dante endpoint for delivering high definition audio at professional levels when combined with VUE’s e-class loudspeakers. The built-in VUEDrive Systems Engine sends 1000W to the internal dual 6x9-inch transducers while providing two 500W output channels, or zones, for adding up to four e-351 or two e-352 passive models. Output channels can also be used to drive a second es-269 passive subwoofer. The es-269V features full network control via SystemVUE software, along with Analog and Dante audio inputs. Acoustically, the es-269V delivers impressive size-to-SPL performance thanks to VUE’s patent-pending Active Compliance Management (ACM) technology. ACM places two high-performance 6x9-inch drivers into a unique arrangement that leverages the benefits of both band-pass and vented alignments.
Vue audiotechnik's e-351 PoE is a “Nano” coaxial speaker, which incorporates Dante-enabled VUEDrive electronics, including 30W of fully optimized bi-amplification that is powered via ethernet form a POE+ (802.3at) switch. Like it’s passive sibling, the e-351 PoE combines an ultra-rigid aluminum enclosure with a revolutionary 3.5-inch coaxial driver that utilizes VUE’s highly-lauded Beryllium HF component to deliver a level of output, fidelity, and efficiency that’s far beyond more conventional compact systems
The FM+ End users can listen with either an FM receiver or over Wi-Fi with their own smartphone. Along with this flexibility comes exceptional audio quality, as the FM+ is built on a professional digital audio (DSP) platform. Added plus: Its optional Dante interface provides integrators with a full audio networking solution.
The new FM+ is designed to support those who want to use their own smartphones and headphones for a more discreet assistive listening experience. Simplicity is also available for those who want a more traditional assistive listening system with a dedicated FM receiver and headset.
The FM+ Dante interface provides integrators with a full digital audio networking solution. It is based on the Audinate UXT Ultimo chipset. This chipset supports both AES67 and SMPTE 2110.
WaveCAST is a Wi-Fi platform designed for pro-audio applications where high-quality sound is required. Hearing assistance can be optimized for hearing loss, music can be optimized for high-fidelity playback, and voice can be set for maximum speech intelligibility. Custom pre-sets can also be established for specific performance applications.
Professional audio inputs on the WaveCAST include 1/4” XLR connectors, phantom power and a line level output jack. In addition to multi-stage gain control inputs, the DSP features include AGC, limiters, high and low pass filter, and adjustable range compressor control.. WaveCAST supports both unicast and multicast network configurations. Up to four WaveCAST systems can be connected to the same Wi-Fi network to provide multiple listening channels -- supporting 45 users in unicast mode or 1500+ users in multicast mode.
The WaveCAST Dante interface is based on the Audinate UXT Ultimo chipset. This chipset supports both AES67 and SMPTE 2110.
Third party applications that use Dante Ready™ allow customers to purchase and activate Dante audio channels after installation using the Dante Activator tool in Dante Controller 4.5 or higher. Dante Activator is tied to an active Audinate user account and accepts standard credit card payments.
Activation instructions:
