Cart
← Back to Product Catalog

Studio Technologies – Model 373A Intercom Beltpack

Intercoms

More details

Similar Products
  • RTS

RTS – ARNI-E

ARNI-E significantly extends the reach of an OMNEO-based RTS intercom network to function seamlessly across subnets. ARNI enhances the flexibility of system deployments by providing network services and network-wide synchronization for OMNEO traffic. ARNI may also be configured for fully redundant operation to ensure network reliability and stability. ARNI-E allows the creation of media networks that are able to support up to 10,000 devices across 40 subnets.  Depending on the size and configuration of the network, multiple ARNI devices can be deployed to achieve the desired network layout and functionality.
    Intercoms
See the product
rts-roameo_1200px|rts-roameo_1200px
  • RTS

RTS – ROAMEO

ROAMEO from RTS is a professional, easy-to-use and future-proof wireless intercom solution based on the license-free DECT (Digital Enhanced Cordless Telecommunications) standard with a protected frequency band. ROAMEO from RTS is a professional, easy-to-use and future-proof wireless intercom solution based on the license-free DECT (Digital Enhanced Cordless Telecommunications) standard with a protected frequency band. It provides high-quality audio over a seamlessly integrated digital wireless beltpack and associated access points. Featuring a modern, rugged design, ROAMEO is suitable for a wide range of professional intercom applications where wireless communication is critical, including broadcast production studios, theater and sport event productions, houses of worship, commercial buildings and outside broadcast (OB) trucks. Operating like a wireless keypanel, ROAMEO can be fully integrated into all existing wired digital RTS matrices. The system allows users to address either individuals or specified groups. The system consists of the TR-1800 beltpack, the AP-1800 access point and accessories including charger, holster and pole-mount kit. Connection to a digital matrix is easily established via a single Ethernet cable. In addition, the system can use standard IT infrastructure, which ensures easy installation and low maintenance costs; the access points can be daisy-chained. The AP-1800 access points convert the DECT signals into Dante-compatible OMNEO IP-technology, thereby providing the highest interoperability, flexibility, reliability and resilience – a truly future-proof solution. OMNEO enables a secure setup at a competitively low system cost due to the use of standard IT components, simplified installation and lower maintenance costs.
    Intercoms
  • AES67 Enabled
See the product
ctp-systems-FWD8000f
  • CTP Systems

CTP Systems – FWD8000

The FWD8000 is a Dante enabled four wire box with eight four wire inputs, eight four wire outputs plus eight IFB inputs. A mix output and a hot microphone output are also available on the network. In addition to the network connections four of the four wire inputs and outputs are mirrored onto the rear of the unit for local analogue use as well as two IFB inputs. Power may be supplied by PoE, an external 12 volt supply or battery or via the IEC mains inlet. The FWD8000 is a Dante enabled four wire box with eight four wire inputs, eight four wire outputs plus eight IFB inputs. A mix output and a hot microphone output are also available on the network. In addition to the network connections four of the four wire inputs and outputs are mirrored onto the rear of the unit for local analogue use as well as two IFB inputs. Power may be supplied by PoE, an external 12 volt supply or battery or via the IEC mains inlet. Each channel has a cut switch, a ifb monitor button plus a vox incoming audio present indicator. Press the talk keys down for momentary operation and up to latch. The latch operation can be defeated if required. Units can be supplied with a headphone jack or a 5 pin XLR headset connector.  There is an 'all talk' key which can be set to talk to any or all of the four wire outputs. There is also a microphone cut button. When a talk key is pressed incoming audio to the loudspeaker is normally dimmed to prevent feedback, the level may be adjusted or defeated as required.  The FWD8000 has a secondary ethernet interface which may be used a switch output or for network redundancy. Mains requirement is 110-240VAC 50/60Hz. Dimensions: 1RU 200mm deep.
    Intercoms
  • Dante Ch: 16x18
See the product