VUE Audiotechnik – e-351 PoE


More details

Similar Products

CNET6D
  • DMIX

DMIX – CNET6D

Technical parameters:

Speaker model: CNET6D

Speaker type: 6.5" Active two-division loudspeaker

Unit configuration: 6.5"(165mm) woofer 1"(25mm) Treble driver

Frequency response: 100Hz-18kHz

Rated power: 50W

Sound pressure level: 113dB

Sensitivity: 89dB

Rated impedance: 8Ω

Directivity (H×V) : 80°×80°

Dante Digital network interface: 2×RJ45 interface

Analog interface: 1×XLR Balanced input,1×XLR Balanced output

Active power amplifier module: 100W

    Speakers
Spik3-Lyre
  • FRENETIK

FRENETIK – Spik 3

Amplified speaker system, 2-way 3", Dante™ PoE+

Amplified speaker system, 2-way 3″, Dante™ PoE+
Ultra compact 2-way powered aluminium speaker system – Dante™ and PoE+ • 60W class D amplifier card with integrated programmed DSP • Wide and homogeneous directivity 95° x 85° • Remote control of volume, bass and treble via FRENETIK Adjust software • Temperature monitoring of the card • No logo on the front panel. Available in Black or White.
Technical data:
• Ref.: SP30DP (black) | SP30DP-W (white)
• Type: 2-way amplified speaker, Dante™ PoE+
• Amplification: 60 W (class D)
• Dante™ Receiver: 1 (16 / 24 / 32 bit - 44.1 à 96 kHz)
• Transducers: 1 x 3" woofer / 1 x 3" tweeter
• Peak SPL capacity (1 m): 109 dB
• Bandwidth (-10 dB): 125 Hz - 20 kHz
• Directivity (H x V): 100° x 100°
• Input connector: 1 x RJ45
• Insert: 2 x M10
• Power supply: PoE+ (IEEE 802.3 at)
• Dimensions: 205 x 95 x 117 mm
• Weight: 2.40 kg
• Packaging: per pair

    Speakers
amadeus-pmx-8d_600px|amadeus-pmx-8d_600px
  • Amadeus

Amadeus – PMX 8 D

The PMX 8 D system hosts a coaxial driver with a 8-inch (20 cm) neodymium woofer (LF) and a 1-inch diaphragm compression driver (HF). The PMX 8 D is bi-amplified using two dedicated high resonance digital amplifiers, featuring outstanding efficiency, with each amp delivering 400 Watts under 8 ohms. The PMX 8 D system hosts a coaxial driver with a 8-inch (20 cm) neodymium woofer (LF) and a 1-inch diaphragm compression driver (HF). The PMX 8 D is bi-amplified using two dedicated high resonance digital amplifiers, featuring outstanding efficiency, with each amp delivering 400 Watts under 8 ohms.  Each speaker channel is under control by a powerful, 64-bit digital processing unit capable of a 118 dB dynamic range. Each of these on-board DSP units include a module dedicated to managing core system parameters including system EQ, time alignment between sections, limiting, and transducer thermal protection. This level of control makes the PMX D Series fully protected and able to operate at the full extent of its abilities.
    Speakers