Dante-enabled Product Catalog
The Model 5204 Interface is a general-purpose audio device that supports applications utilizing the Dante® Audio-over-Ethernet media networking technology. Two 2-channel ("stereo") analog line-level audio signals can be connected to the Model 5204 and then converted to two channels on an associated Dante connection.
The Model 5204 Interface is a general-purpose audio device that supports applications utilizing the Dante® Audio-over-Ethernet media networking technology. Two 2-channel ("stereo") analog line-level audio signals can be connected to the Model 5204 and then converted to two channels on an associated Dante connection.
Analog audio signals connect to line input A by way of a 3-conductor ("stereo") 3.5 mm jack. This allows the direct interfacing of signals from a variety of sources such as personal audio and multimedia players, smartphones, and personal computers. These signals typically have an average (nominal) signal level in the range of –20 to –10 dBu. Line input B supports connection of balanced analog audio signals using two XLR connectors. Average signal levels for these types of signals are typically in the range of 0 to +4 dBu.
Key Features
- Dante audio-over-Ethernet technology
- Two line-level inputs to Dante outputs
- Audio channel level metering
- Excellent audio quality
- PoE powered
- USB dedicated charging port with auto-mode selection
- Standard connectors; compact, lightweight design
The Model 5202 Interface is a general-purpose audio device that supports applications utilizing the Dante® Audio-over-Ethernet media networking technology. Two Dante-associated audio channels can be assigned to the Model 5202 which provides headphone and balanced line-level outputs. The audio quality is such that virtually any audio application can be supported, from simple headphone or loudspeaker monitoring to interfacing with high-performance on-air broadcast, stadium AV, or corporate audio systems. Multi-step LED meters provide confirmation of the level of the two input audio channels. The compact, lightweight design allows the Model 5202 to be used in portable or desktop situations or deployed as a permanent solution in fixed applications. Standard connectors ensure fast, reliable deployment. The unit requires only an Ethernet connection to supply both the data interface as well as Power-over-Ethernet (PoE) power.
Key Features
- Dante audio-over-Ethernet technology
- Headphone and balanced line outputs
- Excellent audio quality
- PoE powered
- Audio channel level metering
- Standard connectors
- Compact, lightweight design
The EXP2x is an input/output expander that enables the HAL1x to send 32 and receive 32 audio channels from other Dante™ devices.
Use the EXP2x to interface a HAL1x System with a Dante network. Applications abound in houses of worship, installed sound, performing arts venues, education and corporate environments. The EXP2x allows connecting a Dante network between facilities or multiple independent HAL1x systems. Built-in sample rate converters support 48 kHz or 96 kHz sample rates on the Dante network.
- Dante Ch: 32x32
- 44.1kHz-96kHz
The DNTWP Dante™ Audio Interface is a cost effective multi IO wall box. The unDX2IO features two balanced mic/line XLR inputs and two balanced XLR line outputs. All inputs and outputs can be used simultaneously and all audio channels are available separately. The unDX2IO is designed to fit into most dual gang US junction boxes and is PoE enabled, so all connectivity (power and data) is provided by a single CAT-5 cable. The unDX2IO’s size and IO density make it easy to put Dante connectivity wherever it’s needed near the audio source or sink thereby eliminating costly and interference prone analog wiring.
The DNT22 I/O Interface is a 2-in / 2-out, cost-effective way to add up to two channels (in and out) of Dante™ audio to an existing Dante-based networked audio system. The DNT22’s small form factor and PoE power capability make it easy to put Dante connectivity wherever it’s needed - near the audio source or sink thereby eliminating costly and interference prone analog wiring.
NETBOX 8 AD inferface features 8 inputs and 8 outputs, organized in 4 mono analog and 2 digital stereo channels. Stereo digital ones can be configured as AES/EBU or SPDIF standards. The second digital stereo channel can also be switched to a USB connector to ease the connection to an audio workstation. It also provides 4 GPI and 4 GPO. The GPO port includes a power supply pin to feed the output circuitry.
NETBOX 8 AD inferface features 8 inputs and 8 outputs, organized in 4 mono analog and 2 digital stereo channels. Stereo digital ones can be configured as AES/EBU or SPDIF standards. The second digital stereo channel can also be switched to a USB connector to ease the connection to an audio workstation. It also provides 4 GPI and 4 GPO. The GPO port includes a power supply pin to feed the output circuitry.
Due to its small footprint, it can be useful to give IP access to analog or digital consoles that are not ready for this type of connectivity from factory, for recording rooms, talk-rooms or any other auxiliary location.
- Dante Ch: 8x8
- AES67 Enabled
The NETBOX 4MH interface has been designed to cover the need for high quality microphone inputs and headphone outputs availability outputs, for example in radio and TV studios, stage or multimedia installations. The multichannel IP connectivity (Audinate DANTE™ protocol) makes the Inputs of the unit available at any point of the network.
The NETBOX 4MH interface has been designed to cover the need for high quality microphone inputs and headphone outputs availability outputs, for example in radio and TV studios, stage or multimedia installations. The multichannel IP connectivity (Audinate DANTE™ protocol) makes the Inputs of the unit available at any point of the network.
NETBOX 4MH interface also includes 4 General Purpose inputs and outputs (GPIO) as interfaces for signaling transport between the different devices in the IP network. As a complementary feature, the unit is soporting the same inputs and outputs as analogue balanced line Inputs and Outputs.
Further, the new interface has additional GPIOs that can be used in for example a studio installation and as an interface to signaling terminals such as the AEQ SRC 03. This greatly facilitates the implementation of services such as remote CUE and Cough-cut, User keys, ON AIR and READY lights, etc.
Technical specifications
- Channels: 4 microphone-line input, 4 line outputs, in parallel with 4 stereo headphone outputs. Mute and gain control between +12 and -30 dB, individually or in stereo pairs.
- 48V Phantom Power supply and electronic balancing for all microphone inputs.
- Data format: DANTE Audio-over-IP technology.
- Scalable and flexible network topology supporting a wide range of audio transmitters and receivers.
- Supports 100Mbps, 1 Gbps and 10 Gbps network segments.
- 2 x RJ45, 100 BASE-T Ethernet ports with galvanic isolation, usable as “daisy chain” connections.
NETBOX 32 AD interface features 32 input and 32 output channels organized in 16 mono analog + 8 stereo digital channels. The stereo digital audio channels can be configured as AES/EBU or SPDIF standard. It also incorporates 16 GPI and 16 GPO (each GPO connector includes a power supply pin to feed the output circuitry).
NETBOX 32 AD interface features 32 input and 32 output channels organized in 16 mono analog + 8 stereo digital channels. The stereo digital audio channels can be configured as AES/EBU or SPDIF standard. It also incorporates 16 GPI and 16 GPO (each GPO connector includes a power supply pin to feed the output circuitry).
Due to its high input and output capacity, it is especially suitable for central controls and link dispatches and also to increase or distribute the capacity of TDM BUS matrixes such as the AEQ BC 2000D.
The DAD DX32 is a versatile digital audio bridge and router interface designed for multiple audio applications such as multi-room recording studios, post-production facilities and audio distribution installations. It allows all digital input and output routing to be managed on a mono channel basis within a single unit or a combination of units.
The NXBoB8 and NXBoB16 can be inserted anywhere in a Dante digital audio stream, converting the signal to analogue for carrying to analogue amplifiers and PA systems.
The units will also act as an amp manager for the MC2 Ti amplifier range, learning the network setup and then interrogating the amps to check that they are performing normally and report on the operational status.
RedNet D16 AES is a 1U 19in rack-mount interface featuring 16 channels of AES/EBU connectivity to and from a Dante audio network, with Ethernet redundancy for maximum network reliability.
The NXBoB8 and NXBoB16 can be inserted anywhere in a Dante digital audio stream, converting the signal to analogue for carrying to analogue amplifiers and PA systems.
The units will also act as an amp manager for the MC2 Ti amplifier range, learning the network setup and then interrogating the amps to check that they are performing normally and report on the operational status.
AuviTran Audio ToolBox is a modular audio platform giving access to a large variety of professional audio networked configurations.
With 3 or 7 slots, AVBx3 and AVBx7 can convert microphone, line in, line out, AES EBU, ADAT, MADI, EtherSound or CobraNet to DANTE.
The AVBx3 and AVBx7 can be mounted in Installation or Touring mode for front or rear panel connectors. AVBx7 embed a built in 1024x1024 digital routing matrix.
Accessories such as redundant power supplies, Switch card with Fiber connectors, 128 channels Sample Rate Converter or GPIOs can be added to extend the ToolBox Solution.
The cost effective xOut 12 increases a system’s analog output channel capacity resulting in a reduction in overall price per channel. Designed exclusively for use with Edge and Radius DSP units, each of the twelve analog outputs’ parameters (gain and mute), along with bus assignments, are configured using SymNet Composer open architecture software. xOut 12 set up is logical and fast with no requirement to use third party software; there are no mechanical switches or circuit board jumpers to set.
AuviTran Audio ToolBox is a modular audio platform giving access to a large variety of professional audio networked configurations.
With 3 or 7 slots, AVBx3 and AVBx7 can convert microphone, line in, line out, AES EBU, ADAT, MADI, EtherSound or CobraNet to DANTE.
The AVBx3 and AVBx7 can be mounted in Installation or Touring mode for front or rear panel connectors. AVBx7 embed a built in 1024x1024 digital routing matrix.
Accessories such as redundant power supplies, Switch card with Fiber connectors, 128 channels Sample Rate Converter or GPIOs can be added to extend the ToolBox Solution.
The cost effective xIn 12 increases a system’s analog input channel capacity resulting in a reduction in overall price per channel. Designed exclusively for use with Edge and Radius DSP units, each of the twelve analog inputs’ parameters (5 gain levels, trim, mute, phantom power), along with bus assignments, are configured using SymNet Composer open architecture software. xIn 12 set up is logical and fast with no requirement to use third party software; there are no mechanical switches or circuit board jumpers to set.
The unDX2IO+ Dante™ Audio Interface is a cost effective multi‐IO wall box to add up to two channels (in and out) of Dante audio to an existing Dante-based networked audio system.. The unDX2IO features XLR balanced audio inputs and outputs, switchable mic/line gain and switchable phantom power on the inputs. An additional 2 Balanced line inputs are accessible on side of unit for use with a companion unXP2I passive expansion plate. All inputs and outputs can be used simultaneously and all audio channels are available separately. The unDX2IO+ is designed to fit into most dual gang US junction boxes and is PoE enabled, so all connectivity (power and data) is provided by a single CAT5 cable.
CONTROL - Audio flow assignment, input gain and phantom power are all controllable via the Dante network connection.
The unDX2IO+ replaces the legacy unDX2IO.
- Dante Ch: 4x4
- 44.1kHz-48kHz
NetAV I/O 2x2 is a network enabled bridge product with 2 channels of analog to digital on to the network and 2 channels of digital to analog off of the network. This simple product is ideal for integrating legacy devices into your Dante network.
- Sub Compact 1/4 rack package
- Two mic/line inputs with selectable pre-gain and phantom power
- Two analog outputs from Dante Network
- Configurable via Control Center Software
- External inline power supply
- Made in the USA
The BB-EB1616DT can be incorporated into any BlueBridge system as an I/O expander or it can be used as a standalone digital snake on networks featuring Dante™.
PENTA 725 IP audio router is a 1024 x 1024 cross points TDM router matrix with 64 bi-directional channels over IP Ethernet powered by Dante, 64 AES3 I/O channels and 6 optical MADI and Double MADI interfaces housed in a 1U 19" chassis
PENTA 721 is a compact 1U digital audio interface with 8 AES/EBU I/O channels, 3 MADI coaxial or optical I/O, 64 channels IP Audio Ethernet I/O powered by Dante and an interface for Avid Pro Tools for up 64 channels of audio I/O.
DNTBOB 88 is a high quality, general purpose 8-in / 8-out interface to transmit and receive line level analog audio signals via a Dante network. Analog inputs are converted to digital and appear on the network as transmit channels. Audio for the analog outputs is taken from subscriptions to transmit channels on the network from other sources. When connected to a network, each break out box will appear as a separate device in the Dante Controller software interface.
The DN9652 Dual Network Bridge has been designed to allow two dissimilar digital audio networks to interface simply and reliably.
- Dante Ch: 64x64
- 16-bit, 24-bit, 32-bit
The DN9650 Network Bridge allows all Midas digital consoles and MIDAS digital I/O hardware, KLARK TEKNIK DN9696 High Resolution Audio Recorders and many other AES50 devices to connect to many different multichannel digital audio networks simply and reliably.
- Dante Ch: 64x64
- 16-bit, 24-bit, 32-bit
Four Audio's DBO1 is a Dante breakout box providing 8 analog output channels and optional 4 AES outputs or 2 AES inputs + 2 AES outputs with outstanding audio performance values.
RedNet 5 connects your RedNet system to Pro Tools HD®. Up to six units can be connected to one Pro Tools HDX system, supporting up to 192 channels at 96 kHz or 96 channels at 192 kHz. Pro Tools HD® Native and Pro Tools HD® (TDM) are also supported. RedNet 5 is interoperable with other Pro Tools interfaces and no RedNet PCIe card is required.
RedNet 4 adds eight of the latest remote-controlled Focusrite mic preamps / line inputs to your RedNet system through a single Ethernet cable. With two selectable DI’s, RedNet 4 provides an effective range of analogue inputs for your system. The unit includes Focusrite’s world-class precision A-D conversion. Mic/Line/DI selection, gain, phantom power, HPF and metering are also accessible from the front panel. The benefit of remote control microphone pre-amp gain is that you can keep the mic pre close to the source (so the analogue cable run is minimal) while still setting gain stages from the control room.
