Cart
← Back to Product Catalog

Auvitran – Audio ToolBox AVBx3

I/O Interfaces

More details

Similar Products

avn-aesio8r-iso-square
  • Sonifex

Sonifex – AVN-AESIO8R 8 AES3 Input, 8 AES3 Output Dual Dante® Interface, PoE

The AVN-AESIO8R audio converter and interface converts up to eight digital stereo AES3 inputs and eight digital stereo AES3 outputs to and from the Dante Audio-over-IP networking standard. Each input can accept sample rates from 32kHz to 192kHz, which will be sample rate converted to the Dante system sample rate. A valid input signal is confirmed by front panel AES3 lock LEDs for each input. All outputs follow the Dante system sample rate.

Dual Ethernet ports allow the unit to operate in redundant mode, ensuring audio routing is maintained in the event of loss of link on either of the network connections. This cost effective 1U rack-mount unit offers an easy solution for AV professionals and system integrators. It is simple to configure and operate, with all set-up done via the standard Dante Controller software and power via PoE (Power Over Ethernet).

All digital AES3 inputs and outputs are on high-quality Neutrik XLR connectors and there are front panel status/confidence LEDs for PoE, Link and Clock.

    I/O Interfaces
  • Dante Ch: 16x16
  • 16-bit, 24-bit, 32-bit
See the product
SSL-Network-IO_A32
  • Solid State Logic

SSL – Network I/O A32

The A32 provides SSL SuperAnalogueTM I/O to Dante and AES 67 based IP networks. The A32 provides SSL SuperAnalogueTM I/O to Dante and AES 67 based IP networks. A32 includes redundant network connections* and PSUs. It features 32 line inputs and 32 line outputs.
    I/O Interfaces
  • Dante Ch: 64x64
  • 24-bit, 32-bit
See the product
lynx-aurora-8_1200px|lynx-aurora-8_1200px
  • Lynx Studio Technology

Lynx Studio Technology – Aurora 8-DNT

The Lynx Aurora 8-DNT is an Aurora 8 combined with a factory installed LT-DANTE interface LT card. The Aurora 8-DNT features 8 channels of up to 24 Bit/192 kHz Mastering Quality analog to digital and digital to analog conversion in single-rack space with an on-board 16 Channel Digital Mixer Providing Flexible I/O Routing. The Aurora™ line of digital audio converters from Lynx Studio Technology offers unprecedented audio quality and control in single-rack space eight and sixteen channel models. The Aurora 8-DNT features 192 kHz analog to digital and digital to analog conversion with front panel control of all routing and sample rate options with Dante audio network connectivity. Extended functions in Aurora are accessible via computer with the Lynx AES16, AES16e and MIDI . The rear panel has Clock and MIDI In and Out connectors and an LSlot bay, for the optional use of other audio interfaces. Other features include:
  • Simultaneous 8 Channel Analog I/O and 8 Channel AES/EBU I/O
  • 24 Bit / 192 kHz Mastering Quality A/D and D/A Conversion
  • 192 kHz AES/EBU I/O Supporting Single and Dual Wire Modes
  • Extensive Remote Control Capability via Lynx AES16, AES16e, and MIDI
  • On-board 16 Channel Digital Mixer Provides Flexible I/O Routing
  • Word clock I/O with Lynx SynchroLock™ Sample Clock Technology
  • Digital I/O DB-25 connectors follow Yamaha pinout protocol
  • Analog I/O DB-25 connectors follow Tascam pinout protocol
  • RoHS compliant
  • Available in 100V, 115V and 230V models
    I/O Interfaces
  • Dante Ch: 32x32
  • 24-bit
See the product