Focusrite – RedNet D16 AES


More details

Similar Products

Burl_B2_ADC_Dante_Front|Burl_B2_ADC_Dante_Front
  • Burl Audio

Burl – B2 Bomber ADC

The B2 Bomber analog to digital converter is designed to give you the ultimate in recording tone. BURL Audio designed an analog audio path that is complimentary to your mic pre and to the analog to digital process. By using a revolutionary hybrid circuit with a proprietary transformer, the BURL AUDIO BX1, and a discrete class-A, zero feedback, zero capacitor signal path, we have achieved dynamic and tonal balance. Features:
  • 44.1k Hz to 192k Hz, 24 bit, 2 channel ADC
  • Proprietary, high definition, BURL Audio BX1 transformer input
  • All class A, discrete transistors signal path with zero feedback, zero caps
  • Audiophile quality 6 position attenuator with standard headroom settings
  • High definition metering with simultaneous RMS and peak indication
  • Dante, 2 AES, SPDIF and Toslink output
  • BNC word clock input with two outputs of extremely low jitter clock
  • Frequency response at 48kHz sample rate is 12Hz to 22kHz, +/- 0.1dB
  • Frequency response at 96kHz sample rate is 15Hz to 46kHz, +/- 0.1dB
  • Frequency response at 192kHz sample rate is 18Hz to 94kHz, +/- 0.1dB
  • 120dB Dynamic Range (A- weighted), 117dB (no weighting)
  • -100dB THD+N (+4dBU = -15dBFs)
  • -94 dB THD+N (+18dBU = -1dBFs)
  • Rugged, Made in USA design
    I/O Interfaces
AVBx3-DANTE-RECORDING-INTERFACE|AVBx3-DANTE-RECORDING-INTERFACE
  • Auvitran

Auvitran – Audio ToolBox AVBx3

AuviTran Audio ToolBox is a modular audio platform giving access to a large variety of professional audio networked configurations. With 3 or 7 slots, AVBx3 and AVBx7 can convert microphone, line in, line out, AES EBU, ADAT, MADI, EtherSound or CobraNet to DANTE. The AVBx3 and AVBx7 can be mounted in Installation or Touring mode for front or rear panel connectors. AVBx7 embed a built in 1024x1024 digital routing matrix. Accessories such as redundant power supplies, Switch card with Fiber connectors, 128 channels Sample Rate Converter or GPIOs can be added to extend the ToolBox Solution.
    I/O Interfaces
  • Dante Ch: 64x64
  • 24-bit
avn-ao16r-iso-square
  • Sonifex

Sonifex – AVN-AO16R 16 Output Dual Dante®Interface, PoE

The AVN-AO16R audio converter and interface converts up to sixteen analogue outputs from the Dante Audio-over-IP networking standard. Dual Ethernet ports allow the unit to operate in redundant mode, ensuring audio routing is maintained in the event of loss of link on either of the network connections.

This cost effective 1U rack-mount unit offers an easy solution for AV professionals and system integrators. It is simple to configure and operate, with all set-up, except line-up levels, done via the standard Dante Controller software and power via PoE (Power Over Ethernet).

All analogue outputs are on high-quality Neutrik XLR connectors and there are front panel status/confidence LEDs for PoE, Link, and Clock. Global 0dBFS line-up can be set to +12dBu, +18dBu or +24dBu to meet your specific requirement via the front panel recessed toggle switch.

    I/O Interfaces
  • Dante Ch: 16x0
  • 16-bit, 24-bit, 32-bit