Stewart Audio - NETAV I/O 2x2

Stewart Audio – NETAV I/O 2×2

Product Information

NetAV I/O 2×2 is a network enabled bridge product with 2 channels of analog to digital on to the network and 2 channels of digital to analog off of the network. This simple product is ideal for integrating legacy devices into your Dante network.

Sub Compact 1/4 rack package
Two mic/line inputs with selectable pre-gain and phantom power
Two analog outputs from Dante Network
Configurable via Control Center Software
External inline power supply
Made in the USA

Blustream – DA11ABL-WP-US

The DA11ABL-WP-US is a multi-input / output wall plate to convert Bluetooth and analog audio within a digital Dante® networked audio system. The DA11ABL-WP converts 2 x input channels of Bluetooth, or unbalanced audio to Dante® digital audio, and 2 x channels of Dante® audio to 2 x output channels of unbalanced audio. Software configuration for the DA11ABL-WP allows for the Bluetooth name to be amended as required where being deployed in multi-user spaces. The DA11ABL-WP is a plug & play device that is powered using PoE (Power over Ethernet), or via 12V power supply, offers support for AES67 RTP audio transport, and magnetic faceplate design allows for both UK & EU backbox compatibility. The DA11ABL-WP is the ideal BYOD interface to allow any Bluetooth device to stream audio wirelessly to a Dante® audio system.

I/O Interfaces

Dante Ch: 2x2
16-bit, 24-bit, 32-bit

See the product

Visionary Solutions

Visionary Solutions – D200L

2 input balanced line level Dante™ interface. 2 XLR female, 1 RJ45, PoE. 2 input balanced line level Dante™ interface. 2 XLR female, 1 RJ45, PoE.

2 Channels of balanced audio input to Dante™ networks.
Professional Line Levels.
Power Over Ethernet
Configure with Dante™ Controller, no other software required.

Distributed exclusively in the U.S. by BTX Technologies.

I/O Interfaces

See the product

Shure

Shure – ANI4OUT-XLR

New ANI4IN and ANI4OUT devices can bring up to four wired microphones onto or from a Dante network for easy audio routing and browser-based connectivity. New ANI4IN and ANI4OUT devices can bring up to four wired microphones onto or from a Dante network for easy audio routing and browser-based connectivity. Both new Microflex Advance array microphones are fully digital for networked set-up, management and control on Dante™ networks.

I/O Interfaces

Dante Ch: 4x0
24-bit

See the product

Stewart Audio – NETAV I/O 2×2

Product Information

Similar Products

Blustream – DA11ABL-WP-US

Visionary Solutions – D200L

Shure – ANI4OUT-XLR

Stay connected to Dante

Support

Company

Dante Networking Alliance