Attero Tech by Q-SYS - unDX2IO+

Attero Tech by Q-SYS – unDX2IO+

Product Information

The unDX2IO+ Dante™ Audio Interface is a cost effective multi‐IO wall box to add up to two channels (in and out) of Dante audio to an existing Dante-based networked audio system.. The unDX2IO features XLR balanced audio inputs and outputs, switchable mic/line gain and switchable phantom power on the inputs. An additional 2 Balanced line inputs are accessible on side of unit for use with a companion unXP2I passive expansion plate. All inputs and outputs can be used simultaneously and all audio channels are available separately. The unDX2IO+ is designed to fit into most dual gang US junction boxes and is PoE enabled, so all connectivity (power and data) is provided by a single CAT5 cable.

CONTROL – Audio flow assignment, input gain and phantom power are all controllable via the Dante network connection.

The unDX2IO+ replaces the legacy unDX2IO.

Specifications

Dante Ch: 4x4
Sample Rate: 44.1kHz, 48kHz
AES67 Enabled

Fairlight – MSX 500

IBC 2016 technology showcase product The Dante-powered MSX500 compact desktop unit with 4 physical slots, of which 3 are wired. This configuration is ideal when Audio over IP is a requirement, but you only need limited I/O, or you need a flexible solution that supports AoIP on-the-go. IBC 2016 technology showcase product The Dante-powered MSX500 compact desktop unit with 4 physical slots, of which 3 are wired. This configuration is ideal when Audio over IP is a requirement, but you only need limited I/O, or you need a flexible solution that supports AoIP on-the-go.

I/O Interfaces

See the product

Alcorn McBride

Alcorn McBride – V-Com VC32K

The V-Com VC32K is an intercom station kit that enables you to create customized intercom consoles with up to 32-zones of ring control. This kit is designed to mount on a standard DIN rail inside the console and comes with a handset, handset hook, ringer, panel-mount XLR harness, and earpiece volume knob. Alcorn McBride believe that intercom solutions should be a breeze to install and intuitive to operate. Just like their popular V-Page product line, they have designed their V-Com solutions to leverage industry-standard DSP platforms like Q-SYS while providing a simple button-based UI that just makes sense. The V-Com VC32K is an intercom station kit that enables you to create customized intercom consoles with up to 32-zones of ring control. This kit is designed to mount on a standard DIN rail inside the console and comes with a handset, handset hook, ringer, panel-mount XLR harness, and earpiece volume knob. A single Ethernet cable provides network audio (Dante or AES67), power (PoE), and control between each V-Com station and the DSP device. It even supports SFP network modules for applications that require the station to be far away from the equipment room.

I/O Interfaces

See the product

Glensound

Glensound – AoIP4I

The Glensound AoIP4I is packaged in a small & rugged format and designed for outside broadcast, theatre and location applications.

Both the AoIP4O and AoIP4I units are designed to easily and quickly interface existing analogue equipment to a Dante® / AES67 network audio system. Being powered by PoE means that only one cable needs to be connected to the network to carry both audio and power, providing flexibility and saving time on installation.

AoIP4I provides 4 balanced analogue audio inputs to a Dante®/AES67 audio network.

Robust proven construction techniques, simple reliable interface and excellent specification will help make your technician’s life hassle free, whilst the low cost and long asset life will keep the accountant satisfied.

I/O Interfaces

Dante Ch: 0x4
24-bit

See the product

Attero Tech by Q-SYS – unDX2IO+

Product Information

Specifications

Similar Products

Fairlight – MSX 500

Alcorn McBride – V-Com VC32K

Glensound – AoIP4I

Stay connected to Dante

Support

Company

Dante Networking Alliance