The Attero Tech by QSC Zip4 is a four-zone Dante/AES67 paging interface that addresses the unique communications needs of large sporting venues, transit hubs like airport terminals and train stations, as well as convention centers and corporate facilities. Paging audio and bi-directional control status data can be routed over a Dante or AES67 network to the Q-SYS Ecosystem, third-party network AV system or other Paging Management System controllers to distribute paging audio in up to four zones.
The Attero Tech by QSC DTH1620 is multi-channel, low-power (16-channel x 20 watts) Dante/AES67 network amplifier, designed for themed entertainment usage and other specialized audio applications, and optimized for integration into the Q-SYS Ecosystem.
The Zip4-3G four-zone Dante/AES67 paging interface addresses the unique communications needs of large sporting venues, transit hubs like airport terminals and train stations, as well as convention centers and corporate facilities. Paging audio and bi-directional control and status data can be routed over a Dante or AES67 network to the Q-SYS Ecosystem, third-party network AV system or other Paging Management System controller to distribute paging audio to up to four different zones. Finally, it allows for a gooseneck paging microphone.
The unHX2D is a DanteTM enabled HDMI de-embedder/embedder designed to bridge 2-channel PCM HDMI audio to/from a Dante audio network. In addition, the unHX2D includes two line level analog inputs and outputs that can be independently bridged to/from a Dante audio network. An adjustable audio delay buffer is included on the Dante output for audio and video lip sync. The unHX2D features flexible audio routing between system input sources and outputs, and facilitates bridging audio from either video sources or monitors to a Dante network. The HDMI output operates as a pass thru repeater of HDMI input video source. The unHX2D also includes installer adjustable EDID management settings via software.
The unD6IO-BT is the latest addition to Attero Tech's innovative Dante wall plates. The unD6IO-BT allows any Bluetooth smart phone, tablet, or PC to stream audio wirelessly onto a Dante network. Bluetooth pairing is simple and intuitive. The unD6IO-BT also sports a 3.5mm stero analog input, stero RCA analog inputs, a 3.5mm stereo analog output, and 2 balanced analog outputs on side mounted Phoenix connectors. The unD6IO-BT is the perfect BYOD interface to a Dante network.
An audio monitoring solution aimed at providing end users with a simple solution for selection and monitoring of up to 64 Dante audio channels.
OUTPUTS - User selectable reception of one of up to 64 Dante audio channels.
INPUTS & OUTPUTS - Internal monitoring speaker and built-in microphone.
CONTROL - Volume, channel, source select and mute buttons.
DISPLAY - Easy to read OLED display for presentation of channel names, volume settings and configuration.
PoE POWER - PoE powered to work with any compliant 802.3af PoE network switch or mid-span injector, external +24VDC supply.
DAISY CHAIN - Dante Daisy Chaining allows multiple unDNEMO, as well as other Attero Tech daisy chain enabled devices, to be connected over a single home-run to the Ethernet switch.
A 4-in, 2-Out I/O Interface that is a convenient, cost-effective way to add up to 6 channels of Dante audio to an existing Dante-based networked audio system.
INPUTS - 2 XLR input with switchable mic/line gain and switchable phantom power on the inputs. Choice of unbalanced input (RCA or 3.5mm stereo jack) selectable by software.
OUTPUTS - 1 3.5mm output, and two balanced outputs on a side‐mounted depluggable connector with software controlled volume.
CONTROL - Audio flow assignment, input gain, phantom power and unbalanced input selection are all controllable via the Dante network connection.
The unDX4I is a 4 input, 2-gang wall plate interface that also includes two outputs.
The unDX4I DanteTM Audio Interface is a cost effective multi‐IO wall box. The unDX4I features four balanced mic/line XLR inputs and two balanced line outputs on a Phoenix connector. All inputs and outputs can be used simultaneously and all audio channels are available separately. The unDX4I is designed to fit into most
dual gang US junction boxes and is PoE enabled, so all connectivity (power and data) is provided by a single CAT‐5 cable. The unDX4I’s size and IO density make it easy to put Dante connectivity wherever it’s needed ‐ near the audio source or sink ‐ thereby eliminating costly and interference prone analog wiring.
This product has reached end of life
The unD3IO 2-in, 2-Out I/O Interface is a convenient, cost-effective way to add up to two channels (in and out) of Dante audio to an existing Dante-based networked audio system.
The unDX2IO+ Dante™ Audio Interface is a cost effective multi‐IO wall box to add up to two channels (in and out) of Dante audio to an existing Dante-based networked audio system.. The unDX2IO features XLR balanced audio inputs and outputs, switchable mic/line gain and switchable phantom power on the inputs. An additional 2 Balanced line inputs are accessible on side of unit for use with a companion unXP2I passive expansion plate. All inputs and outputs can be used simultaneously and all audio channels are available separately. The unDX2IO+ is designed to fit into most dual gang US junction boxes and is PoE enabled, so all connectivity (power and data) is provided by a single CAT5 cable.
CONTROL - Audio flow assignment, input gain and phantom power are all controllable via the Dante network connection.
The unDX2IO+ replaces the legacy unDX2IO.
Third party applications that use Dante Ready™ allow customers to purchase and activate Dante audio channels after installation using the Dante Activator tool in Dante Controller 4.5 or higher. Dante Activator is tied to an active Audinate user account and accepts standard credit card payments.
