Product Information
Four Audio’s DBO1 is a Dante breakout box providing 8 analog output channels and optional 4 AES outputs or 2 AES inputs + 2 AES outputs with outstanding audio performance values.
Similar Products
- Lectrosonics
Lectrosonics – DNTBOB 88
DNTBOB 88 is a high quality, general purpose 8-in / 8-out interface to transmit and receive line level analog audio signals via a Dante network. Analog inputs are converted to digital and appear on the network as transmit channels. Audio for the analog outputs is taken from subscriptions to transmit channels on the network from other sources. When connected to a network, each break out box will appear as a separate device in the Dante Controller software interface.
- I/O Interfaces
- PTN Electronics
PTN Electronics – DAN-D4
The DAN-D4 is a Dante Dangle. It connects to your Dante network and supports Analog 0X2 channels audio, allowing to connect analog amplifier to your Dante audio network.
- I/O Interfaces
- Extron Electronics
Extron – AXI 22 AT
The Extron AXI 22 AT is a quarter rack width audio interface for integrating two mic/line sources onto a Dante™-enabled audio system.
The Extron AXI 22 AT is a quarter rack width audio interface for integrating two mic/line sources onto a Dante™-enabled audio system. It features two mic or line inputs on a 3.5 mm captive screw connector, with switchable 48 volt phantom power. Input select, gain, and phantom power settings are controllable from the front panel, via DSP Configurator Software, or by SIS command. The AXI 22 AT also features two line level outputs for routing any two Dante channels from the network to the audio system. The AXI 22 AT interfaces with any Dante-equipped audio processor, and can be powered through PoE.
- I/O Interfaces