AEQ – NetBOX 32 AD


More details

Similar Products

201982115447
  • BARE

BARE – BR-102D12

BR-102D is a Dante interface with 12 microphone inputs . It is ideal for adding microphone inputs to Dante systems. The BR-102D can be installed near the sound source to minimize analog wiring that is prone to interference. Dante connection simplifies the system's infrastructure wiring. Each BR-102D unit can be connected to a network switch using a category 5 network cable. All adjustable parameters of BR-102D can be controlled by dante controller software. The BR-102D has 12 balanced microphone inputs. Each microphone input comes with a 48v phantom power switch that can independently switch phantom power. Each channel independently displays the channel level, and has an independent switch to adjust the input microphone volume. The front panel has indicators to show the power and network status for easy troubleshooting.

    I/O Interfaces
micromedia-Digimedia-AMP-Pro_1200px|micromedia-Digimedia-AMP-Pro_1200px
  • Micromedia

Micromedia – Digimedia AMP Pro

Digimedia AMP Pro is a 2 channel Dante™ interface with analog amplifier output and PoE (Power over Ethernet) on board. There is Dante Domain Manager and AES67 support build in. Audio output power depends on PoE and can go up to 20W. Digimedia AMP Pro is a 2 channel Dante™ interface with analog amplifier output and PoE (Power over Ethernet) on board. There is Dante Domain Manager and AES67 support build in. Audio output power depends on PoE and can go up to 20W.
    I/O Interfaces
Tranfer-back
  • FRENETIK

FRENETIK – Transfer

Allows the conversion and distribution of 4 analog sources on Dante™ network • detachable euroblock input/output connectors • PoE (provided) or 12V power supply (not provided)

Technical data:

Type: Dante™ interface 4x4
Input Connectors: 4 x euroblock
Output Connectors: 4 x euroblock
Audio network connector: RJ45
Input impedance: > 1.8 kohms
Maximum input level: +8 dBu
Output impedance: 200 ohms
Maximum output level: + 20 dBu
Frequency response: 20 Hz - 20 kHz (+/- 1 dB)
THD+N: < 0.02%
Power supply: PoE 802.3 af (provided) or 12 V external (not provided)
Consumption: 10 W max
Dimensions: 52 x 81 x 121 mm
Weight: 357 g

    I/O Interfaces