Product Information
The BB-EB1616DT can be incorporated into any BlueBridge system as an I/O expander or it can be used as a standalone digital snake on networks featuring Dante™.
Specifications
- Dante Ch: 16x16
- Bit Depth: 24-bit
- Sample Rate: 48kHz
AtlasIED – BB-EB1616DT
Similar Products
- Arrakis Systems
Arrakis Systems – Simple IP 8D
Simple-IP is a one rack unit AoIP box with 8 mono inputs and 8 outputs (or 4 by 4 stereo pairs). The digital version of Simple IP uses XLR AES3 connectors, that allow you to connect your digital audio equipment.
AES67 compliant, it is excellent to use with any existing Dante or AES67 network.
Simple-IP is a one rack unit AoIP box with 8 mono inputs and 8 outputs (or 4 by 4 stereo pairs). Available in 2 models: analog & AES digital. The digital version of Simple IP uses XLR AES3 connectors, that allow you to connect your digital audio equipment. Uses standard off the shelf ethernet switches’ for connectivity. And uses the world standard DANTE ethernet AoIP protocol. Connect to products from more than 300 manufacturers. From mics to speakers to mixers.
Using the world standard DANTE ethernet audio protocol, Arrakis has built the first cost effective ethernet audio networking solution for the average radio broadcaster and professional AV installer. It replaces the multipair cables that distribute audio around your facility with a single CAT5e ethernet cable. With its AES-67 interface, Simple-IP can even send and receive streams from other non-DANTE AoIP networks. Put one in each room and one or more in your central equipment room, then run CAT5e ethernet cable and your audio routing is done.
Product demo: https://youtu.be/jAymqlc5lmo
- I/O Interfaces
- Mansion
Mansion – DIC3533A
DIC3533A is a high quality Dante interface box for converting four Dante channels to Analogue Audio outputs, and four Analogue Audio inputs to Dante network.
Line Input/Output on the front panel accept Stereo or Mono signal by switches.
Features:
*Two Mic/Line XLR Inputs and One Mini-jack Input on Front Panel
*Terminal Block for Two Audio Outputs on Rear Panel
*One Mini-jack Output on Front Panel
*Converts Mic or Line Audio Signals to Dante Network
*Mic or Line is Selectable for Each XLR Input
*Switchable 48V Phantom Power for Each Mic XLR Input
*Adjustable Mic/LIne Gain from -20 dB to +20dB for Each Input Channel
*Stereo/Mono switch for Mini-jack Input and Output
*Four Audio Signal Outputs from Dante Network
*Balanced or Unbalanced Signal Outputs
*High Resolution 24 Bit for DAC and ADC
*Power over Ethernet (PoE) or 24VDC power supply
*Provides High Quality of Preamplifier for Microphones
*Dimension: 116mm x 114.5mm x 53.1mm (WHD)
- I/O Interfaces
- Focusrite
Focusrite – RedNet A8R
RedNet A8R expands Focusrite’s growing range of 1U Dante interfaces with network and power supply redundancy, providing eight channels of analogue input and output.
RedNet A8R expands Focusrite’s growing range of 1U Dante interfaces with network and power supply redundancy, providing eight channels of analogue input and output. RedNet A8R offers high quality 192kHz/24-bit A-D and D-A digital conversion with up to 119dB dynamic range, plus two channels of AES/EBU digital I/O, to and from the Dante network.
RedNet A8R provides 24-bit conversion at 44.1, 48, 88.2, 96, 176.4 and 192kHz sample rates (remotely-selectable) and includes pull-up/down capability. Electronically-balanced analogue audio I/O is provided on DB25 connectors wired to AES59 specifications. Internal signals are balanced throughout. Inputs and outputs are remotely configurable for 0dBFS= +18dBu or +24dBu signal levels. In addition, two channels of AES/EBU I/O are provided on XLR connectors, with sample rate conversion on the input. The clock source for the unit may be internal, or external via Word Clock or DARS (via the XLR input). RedNet A8R also outputs Word Clock.
RedNet A8R features power and network redundancy, with two separate universal (100–240V) PSUs, which include IEC connectors with retaining clips, plus dual network interfaces on locking etherCON connectors. These ports can be configured remotely to Redundant or Switched (daisy-chain) mode.
Key Features
- Eight channels of high-quality line-level analogue I/O
- 24-bit precision Focusrite conversion up to 192kHz
- 119dB dynamic range, flat from 20Hz – 20kHz, +/-0.15dB
- Internally balanced throughout
- Dante-based remote-controlled audio-over-IP connectivity
- Dual power supplies and network connections with full power and network redundancy, including latching connectors for maximum reliability
- Word Clock I/O and DARS for increased flexibility, plus an additional two channels of AES/EBU I/O
- Analogue I/O to AES59 standard on DB25 connectors
- Comprehensive front-panel indicators
- Software-based routing and control – no hardware patching required
- I/O Interfaces
- Dante Ch: 10x10
- 24-bit