Cart
← Back to Product Catalog

promedias – proDT CI UP

I/O Interfaces, Wall Plates

More details

Similar Products

Amphenol_-_RJD32A3-0050
  • Amphenol

Amphenol – RJD32A3-0050

Amphe-Dante are Dante® audio to analogue audio adapters, with one RJ45 Dante output, and one AX series XLR AES3 input, and one AX series XLR AES3 output connectors in a molded housing. Amphe-Dante are Dante® audio to analogue audio adapters, with one RJ45 Dante output, and one AX series XLR AES3 input, and one AX series XLR AES3 output connectors in a molded housing. Amphe-Dante products enable simple connection of analogue equipment to a Dante network and can receive audio channels from a Dante network and provide studio-quality, low-latency audio via an XLR connector to analogue audio equipment. Any audio available on the Dante network can be routed via the XLR outputs to an amplifier, powered speaker, mixing console, digital signal processor (DSP), or other analogue audio device.
    I/O Interfaces
See the product
hugel-pru
  • Hugel

Hugel – PRU

The PRU basically serves as a audio router with up to 4 interfaces with 64 channels each in a 19"/1RU case. Every single input can be routed to one or many outputs using the EmBER+ interface. For each of the 4 interfaces the protocol can be chosen to be either Dante (Audinate's Brooklyn II) or SMPTE-2110 (Ross Video's Liberty). The built-in sample rate converters allow therefore up to 4 independently synchonized clock domains to be connected to the PRU. Using two of each module type, a 128-channel bridge between Dante and SMPTE-2110 can be formed. Optionally PRU can be extended by a central intercom matrix. The 256x256 matrix is fully equipped with summing and level adjusting features.

    I/O Interfaces
See the product
focusrite-rednet-D64R_600px
  • Focusrite

Focusrite – RedNet D64R

RedNet D64R is a 64 channel interface bridging between MADI (AES10) and Dante.  RedNet D64R is a 64 channel interface bridging between MADI (AES10) and Dante. With sample rate conversion on all input and output channels, it's simple to add MADI to connect MADI-enabled equipment with a Dante network. Both optical and coaxial connections are provided for MADI, alongside word clock connections, which allow the Dante network to synchronise with other digital audio equipment. Key features
  • Connects a MADI system and a Dante network seamlessly together.
  • Connect Dante to digital mixing consoles, interfaces and cards that use MADI; or extend a MADI system with RedNet’s versatile, superb-quality audio interfaces and connectivity – or any other Dante compatible devices. 
  • Built-in redundancy with dual locking power and etherCON network connectors. 
  • Supports both coax and optical interfaces – connect simply to any MADI equipment.
  • Slave either the Dante system or MADI streams to an external clock.
  • Supports up to 64 channels of digital audio I/O at standard sample rates (44.1/48kHz) from a MADI system, 32 channels at 96kHz and 16 at 192kHz. 
  • Sample rate conversion (SRC) on each input and output, allowing MADI and Dante systems to operate simultaneously at different sample rates. 
  • Simple 1U rack-mount module with the classic red aluminium faceplate. 
  • RedNet Control and Dante software allow remote routing and control from the audio computer system via a software control panel – no hardware patching required.
    I/O Interfaces
See the product