RDL – RU-MLB2


More details

Similar Products

0114853_unterputzanschluss-mit-35mm-klinkenbuchse-inp
  • promedias

promedias – proDT 3.5/CI UP

Flush-mounted connection with 3.5mm jack input & 2x cinch sockets input to Dante

  • AES67 & DDM ready!
  • 4x0 LINE IN (3.5mm Stereo/Cinch Stereo female)
  • PoE / 5VDC Input
  • Stereo L+R DANTE® Broadway
  • Sample Rate: max. 192kHz | Latency: min. 0.25ms
  • Network Speed: 1Gb/s / 100Mb/s
  • Dimensions: Gr. I+I (1x2/2x1) - 148x88x59mm bzw. 50mm
  • Installation dimensions: 120x67x44mm bzw. 120x60x44mm (cutout x depth)
  • Color: black (Feller 60), similar to RAL 9005 (also available as standard, e.g. white 61 or option RAL/NCS colour!)
    I/O Interfaces
bose-controlspace-EP40-D_1200px|bose-controlspace-EP40-D_1200px
  • Bose Professional

Bose – ControlSpace EP40-D

The Bose® ControlSpace® EP40-D 4-input Dante endpoint adds 4 mic/line inputs to a Dante-based network audio system. Front-panel indicators show channel gain/pad and phantom power status for easy troubleshooting.  The ControlSpace EP40-D 4 input Dante endpoint is the ideal interface for adding mic/line inputs to a Dante system. The small form factor of the EP40-D allows it to be mounted almost anywhere, putting it close to audio sources and minimizing interference-prone analog wiring. The EP40-D features four balanced mic/line inputs, each with software selectable +48V phantom power and 8 gain levels. Front panel indicators show each channel’s gain and phantom power status for easy troubleshooting. The EP40-D has two network connections to allow Dante daisy chaining. Dante daisy-chaining further simplifies system infrastructure wiring by allowing multiple EP40-Ds to use a single CAT-5 home run connection to a network switch. Power can also be daisy chained. The EP40-D is powered by either an external +24VDC supply or any PoE network switch. Setup and control, including like mic/line input 
    I/O Interfaces
fc-404net
  • Kramer

Kramer – FC-404NET

FC-404Net is a four-input/four-output Dante™ interface with line or microphone level inputs and line level outputs. It connects analog inputs to a digital Dante network or outputs four channels from a Dante network. FC-404Net is a four-input/four-output Dante™ interface with line or microphone level inputs and line level outputs. It connects analog inputs to a digital Dante network or outputs four channels from a Dante network.
    I/O Interfaces
  • Dante Ch: 4x4
  • 44.1kHz-96kHz