Symetrix - xIO Bluetooth

Symetrix – xIO Bluetooth

Product Information

Using a modern, full-featured Bluetooth 5.0 chipset allows the xIO Bluetooth to offer extended range, a stable connection, and world-class audio quality. Available in US/EU form factors, the xIO Bluetooth has a clean, sleek design compatible with standard single gang US wall boxes with Decora faceplates, as well as EU/UK standard wall boxes.

IP/PoE simplify installation by allowing a single cable from the xIO Bluetooth to a PoE enabled network switch. The xIO Bluetooth may be configured for media-only, phone bridge, or both, and can be controlled using Symetrix remotes, SymVue panels, or third-party control systems.

The xIO Bluetooth is a fully integrated member of the Symetrix xIO family of Dante endpoints allowing full control and configuration of the device, including Dante routing, from within Symetrix Composer™ software. The xIO Bluetooth is fully configurable including the Bluetooth friendly device name, Dante channel names, connect/reconnect functionality, and security.

Specifications

Dante Ch: 4x4
Bit Depth: 24-bit
Sample Rate: 48kHz
AES67 Enabled

Digigram – Audioway Bridge B2

The BRIDGE B2 is an intelligent gateway between MADI digital audio and AES67/Dante™ synchronous audio-over-IP streams. Forming the backbone of your infrastructure, the BRIDGE B2 is the ideal solution to distribute and interconnect your MADI and AES67/Dante mission-critical streams in the studio. The BRIDGE B2 is an intelligent gateway between MADI digital audio and AES67/Dante™ synchronous audio-over-IP streams. Forming the backbone of your infrastructure, the BRIDGE B2 is the ideal solution to distribute and interconnect your MADI and AES67/Dante mission-critical streams in the studio.

Stainless steel 1U chassis power consumption <50 W
Front panel control interface for rapid overview of current status
Dual AC/DC power supply 4 configurable GPIOs Wordclock synchronisation 24-bit audio routing: 44.1 kHz to 96 kHz
AES67/Dante interface: 64-in/64-out EtherCON connector AoIP stream redundancy Integrated 4-port switch
MADI interface: 1 x optical 64-in/64-out connector 1 x BNC 64-in/64-out connector

I/O Interfaces

See the product

monacor-international-dtta-2|monacor-international-dtta-2

Monacor

Monacor – DTTA-2

The DTTA-2 is a Dante I/O box, for converting analogue audio signals into Dante streams. The DTTA-2 is a Dante I/O box, for converting analogue audio signals into Dante streams.

2 x microphone/line input (XLR, bal.)
1 x aux input (3.5 mm stereo jack)
1 x Dante™ output (EtherCon/RJ45)
1 x monitor output (3.5 mm stereo jack)
Gain adjustable via recessed potentiometer (0-60 dB)
Individually switchable 12 V phantom power for the inputs
Encoding/decoding: 16/24/32 bits
Sample rates: 48/88.2/96

I/O Interfaces

See the product

LAWO

Lawo – 2x Dante I/O

The perfect way to connect to Dante networks. Dual-redundant ports give access to a total of 64 Dante streams. This interface card is used with Lawo's Power Core and Power Core RP. The perfect way to connect to Dante networks. Dual-redundant ports give access to a total of 64 Dante streams. This interface card is used with Lawo's Power Core and Power Core RP.

I/O Interfaces

Dante Ch: 64x64
24-bit

See the product

Symetrix – xIO Bluetooth

Product Information

Specifications

Similar Products

Digigram – Audioway Bridge B2

Monacor – DTTA-2

Lawo – 2x Dante I/O

Stay connected to Dante

Support

Company

Dante Networking Alliance