Sonifex - AVN-AI16 16 Input Dante® Interface, PoE

Sonifex – AVN-AI16 16 Input Dante® Interface, PoE

Product Information

The AVN-AI16 audio converter and interface converts up to sixteen analogue inputs to the Dante Audio-over-IP networking standard. This cost effective 1U rack-mount unit offers an easy solution for AV professionals and system integrators. It is simple to configure and operate, with all set-up, except line-up levels, done via the standard Dante Controller software and power via PoE (Power Over Ethernet).

All analogue inputs are on high-quality Neutrik XLR connectors and there are front panel status/confidence LEDs for PoE, Link, and Clock. Global 0dBFS line-up can be set to +12dBu, +18dBu or +24dBu to meet your specific requirement via the front panel recessed toggle switch.

Specifications

Dante Ch: 0x16
Bit Depth: 16-bit, 24-bit, 32-bit
Sample Rate: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
AES67 Enabled

Pinanson – Press Splitter – SPP Dante

Press Splitter with Dante input plus analogue audio. Passive distribution and PoE.

I/O Interfaces

See the product

Redx

Redx – PoE25DD

The PoE25DD is a 20w/8 ohm output audio power module. It adopts the latest PoE technology standard and can solve power supply and Dante digital audio signal transmission and control with only one network cable. The PoE25DD is a 20w/8 ohm output audio power module. It adopts the latest PoE technology standard and can solve power supply and Dante digital audio signal transmission and control with only one network cable.

Integration of network PoE power supply and Dante audio data transmission, simplifying cable layout and compliance with Ethernet engineering specifications;
Audio transmission realizes digitization, networking, and system expansion;
distributed digital audio systems: In large audio systems with multiple input and output devices, the audio devices are connected decentralized, routing and signal distribution through software;
Through the Dante interface, it is ensured that the network audio data has excellent delay indicators, and the number of audio channels carried by a single network cable terminal reaches 64 channels of input and 64 channels of output;
Dante Controller software allows easy network-wide Dante device discovery and full network audio routing configuration.
The PoE network cabling uses an Ethernet cable to carry 48V DC power. It has no restrictions on high-voltage AC wiring and better meets site safety and fire protection specifications. It can be widely used in ballrooms/function rooms, bars/restaurants, classrooms, conference rooms, chapels, theme parks, and shopping malls.

I/O Interfaces

See the product

BARE

BARE – TNT-0808D

The audio processing center is an audio processor with 16 inputs (8 analog and 8 digital) and 16 outputs (8 analog and 8 digital). The industry-leading ADI DSP SHARC21489 is used, and the maximum operating frequency is up to 450MHz. The input and output modules of DSP can be customized according to the actual situation. At the same time, it has independent AFC, AEC, ANS, AGC, gain sharing automatic mixing, threshold automatic mixing and other processing modules to meet the audio processor and transmission needs of various places. Such as meeting rooms, multi-function halls, conference center auditoriums, administrative centers, etc.

I/O Interfaces

See the product

Sonifex – AVN-AI16 16 Input Dante® Interface, PoE

Product Information

Specifications

Similar Products

Pinanson – Press Splitter – SPP Dante

Redx – PoE25DD

BARE – TNT-0808D

Stay connected to Dante

Support

Company

Dante Networking Alliance