Cart
← Back to Product Catalog

BARE – TNT-0808D

I/O Interfaces

More details

Similar Products

mansionDIC2E23A
  • Mansion

Mansion – DIC2E23A

DIC2E23A is a high quality Dante interface box for converting two Dante channels to Analogue Audio outputs, and two Analogue Audio inputs to Dante network. Features: *Two Mic/Line Terminal Block Inputs on Rear Panel. *Converts Mic or Line Audio Signals to 2 Channels Dante Network. *Switchable Mic/Line/48V Phantom Power for Each Input. *Terminal Block for Two Audio Outputs on Rear Panel *Two Audio Signal Outputs from Dante Network. *Converts 2 Channels Dante Signals to Two Line Terminal Block Outputs. *Balanced or Unbalanced Signals for Inputs and Outputs. *Adjustable Gain Control for Output Level on Rear Panel. *LED indicators for Signal Level and Clip of Each Input Channel on Front Panel. *Adjustable Gain from -20 dB to +20dB for Each Input Channel on Front Panel. *LED indicators for Signal Level of Each Output Channel on Front Panel. *Power over Ethernet (PoE) or 24VDC power supply *LED Indicators Show the Status of Power and Network. *High Resolution 24 Bit for DAC and ADC *Provides High Quality of Preamplifier for Microphones. *Dimension: 143mm x 45mm x 93mm (WHD)
    I/O Interfaces
See the product
Amphenol_-_RJD2103-0050
  • Amphenol

Amphenol – RJD2103-0050

Amphe-Dante are Dante® audio to analogue audio adapters, with one RJ45 Dante output, and one AX series XLR analogue input in a molded housing. Amphe-Dante are Dante® audio to analogue audio adapters, with one RJ45 Dante output, and one AX series XLR analogue input in a molded housing. Amphe-Dante products enable simple connection of analogue equipment to a Dante network and can receive audio channels from a Dante network and provide studio-quality, low-latency audio via an XLR connector to analogue audio equipment. Any audio available on the Dante network can be routed via the XLR outputs to an amplifier, powered speaker, mixing console, digital signal processor (DSP), or other analogue audio device.
    I/O Interfaces
See the product
ru-nfdp_400px
  • RDL

RDL – RU-NFDP

The RU-NFD is a high quality Dante network to Format-A interface/distributor compatible with RDL Format-A twisted pair audio products. The RU-NFD converts three Dante network audio channels to RDL Format-A. The unit also converts a fourth Dante audio channel to a balanced line-level AUX output. Model RU-NFDP operates from PoE. The RU-NFD is a high quality Dante network to Format-A interface/distributor compatible with RDL Format-A twisted pair audio products. The RU-NFD converts up to three Dante network audio channels to RDL Format-A. The unit also converts a fourth Dante audio channel to a balanced line-level AUX output. RDL’s Format-A system utilizes the 4 pairs of a standard CATx cable; 3 pairs (pairs A, B and C) are designated for sending and receiving audio and the fourth pair is used to distribute 24 Vdc to connected Format-A products. The RU-NFD provides signal presence metering and is equipped to power connected Format-A endpoints. The RU-NFD is also available in a PoE version (RU-NFDP). If PoE power and an external 24 Vdc supply are both feeding an RU-NFDP, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. 
    I/O Interfaces
See the product