Lectrosonics - DNTBOB 88

Lectrosonics – DNTBOB 88

Product Information

DNTBOB 88 is a high quality, general purpose 8-in / 8-out interface to transmit and receive line level analog audio signals via a Dante network. Analog inputs are converted to digital and appear on the network as transmit channels. Audio for the analog outputs is taken from subscriptions to transmit channels on the network from other sources. When connected to a network, each break out box will appear as a separate device in the Dante Controller software interface.

Specifications

Dante Ch: 8x8

DiGiCo – A168D Stage

The A168D Stage is a portable 16 input 8 output I/O Expander, again using the Dante network protocol to provide additional I/O anywhere on a network. It comes with 16 mic preamps on XLR inputs with Phantom Power status LEDs and 8 XLR line outputs with direct preamp control from the 4REA4 controller software. It runs at 48k and 96k and is AES67 compatible. Primary and secondary ports again come with locking EtherCON connectors and can run in redundant or switched mode.

I/O Interfaces

Dante Ch: 16x8
24-bit

See the product

BARE

BARE – BR-104A

BR-104A digital audio processor is an audio processing and control system that can be freely designed. It uses advanced DSP processing technology and has a new algorithm of automatic mixing and feedback cancellation, which can solve various practical problems in application scenarios. Since most of the controls are operated by software, the appearance is more concise and lively. The operator only needs to click the mouse lightly, instead of adjusting complex large-scale mixers on the spot to complete the function conversion as before, which greatly simplifies the operation.

I/O Interfaces

See the product

BARE

BARE – DF-8

Features： 1. Automatically assign IP address through router DHCP; 2. Each receiving channel can be controlled independently, and it can be applied to any location in the local area network. 3. With backup analog input interface and Dante network interface, transmission double backup; 4. With a link output interface, analog audio and digital audio can be connected hand in hand; 5. Integrate network transmission, pure digital power amplifier and full-range speaker with RS-232 control and monitoring; 6. It has high efficiency and high sound energy output, excellent sound quality, perfect protection function and good electromagnetic compatibility characteristics; 7. It has perfect protection functions (short circuit protection, over current protection, over and under protection, DC protection, power limit, temperature limit, long-term output power limit, clipping limiter).

I/O Interfaces

Dante Ch: 8 In
48kHz

See the product

Lectrosonics – DNTBOB 88

Product Information

Specifications

Similar Products

DiGiCo – A168D Stage

BARE – BR-104A

BARE – DF-8

Stay connected to Dante

Support

Company

Dante Networking Alliance