Cart
← Back to Product Catalog

Klark Teknik – DN9650

I/O Interfaces

More details

Similar Products

unito-DIO_600px|unito-DIO_600px
  • DELEC

DELEC – unito DIO

The DIO is the Swiss army knife for audio, with an impressive range of tools and converters. The DIO is the Swiss army knife for audio, with an impressive range of tools and converters. 2 port Ethernet switch (1x 1Gb Copper and 1x SFP cage), Dante audio, AES Input and Output, Mic Input, Line Input, Line Output, Headphone Output with external volume control and 2 x GPIO. The DIO is powered by PoE (Power over Ethernet) or runs via an external PSU. Redundancy is provided between both power sources.
  • 1000 point FIR filters on outputs. (Perfect for PA integration with existing 100/70V systems.)
  • Customized DSP options
  • Native Delec communication panel integration
    I/O Interfaces
See the product
ktdn30
  • Klark Teknik

Klark Teknik – DN 30T

The new DN 30T, a compact Audinate Dante audio transmitter for connecting mic/instrument or line level sources to a Dante network. The DN 30T can be connected to any Dante receiver via a standard CAT5e or CAT6 cable. This same connection can be used to power the device through Power over Ethernet (PoE) or via a 24-volt DC input. The DN 30T has stated 96 kHz analog to digital conversion. Balanced or unbalanced 1/4-inch, RCA or stereo 1/8-inch cables are available for connecting to either a smartphone, tablet, microphone or instrument. Input levels can also be adjusted via the level knob. The compact DN 30T is encased in a thick aluminum extrusion housing to protect the electronics. The enclosure also has rubber corner bumpers. Floor and wall mount brackets are included for fixed installation applications.
    I/O Interfaces
See the product
PIC_CDT100_MK3_002
  • Clockaudio

Clockaudio – CDT 100 MK3

The Clockaudio Dante Transporter is an advanced professional Dante communication product which combines audio and control transmission across a standard IP network. Based on high performance and pre-configurable hardware platform it guarantees perfect sound quality. The CDT 100 Mk3 has a variety of uses including but not limited to boardrooms, video and conference rooms, or any place else where multiple microphones and control devices are connected back to the AV equipment cabinet.

Features:

• Easy to install with under table mounting

• Dante Audio and control signals transported over standard IP network

• 4 audio inputs, with gain control, high pass filters and Phantom Power

• 2 line-level outputs with high pass filters

• Up to 6 units may be daisy chained

• 4 Touch Switch ports compatible with all logic enabled Clockaudio devices.

• Open API for interfacing with Control Systems

• Compatible with any Dante capable audio DSP

    I/O Interfaces
See the product