Cart
← Back to Product Catalog

RDL – RU-MLB4

I/O Interfaces

More details

Similar Products

audix-DN4
  • Audix

Audix – DN4

The DN4 microphone interface is a key part of the Audix Dante | AES67 Integrated Microphone System, the fast, trouble-free way to stream Audix audio performance through Ethernet networks. High-quality audio and all microphone functions - including on-off contact closure and LED status indicators - are available through a single CAT5 - CAT7 cable with RJ45 connections at both interface and microphone. This simple configuration eliminates wiring errors, accelerates installation, and reduces cost.

The DN4 features four inputs for Audix RJ45-equipped, single-element microphones and two 5V logic outputs per port, with source/sink capability for LEDs that are controlled by network-connected DSPs and one logic input per port for buttons. Low-pass and high-pass filter settings are available on each audio channel, as are eight selectable gain levels, with all settings configurable via software.

Audio Features

  • Compatible with all Audix RJ45-equipped, single-element, analog microphones 
  • High-fidelity 24-bit, 48kHz audio
  • Balanced audio inputs with RFI filtering
  • 48V phantom power output
  • Each channel has eight selectable pre-amp gain levels, as well as low- and high-pass filters
  • All channels controlled independently
  • Flash memory prevents loss of settings in the event of power loss

Dante® Features

  • Supports AES67 audio streams
  • Dante Domain Manager (DDM) ready
  • Dynamic or static IP address
  • Evaluated to the requirement of UL2043 and is suitable for use in above-ceiling applications

Power Features

  • Operates on PoE from any IEEE 802.3af compliant equipment
    I/O Interfaces
See the product
aurora-ipx-tcw3_480px|aurora-ipx-tcw3_480px
  • Aurora Multimedia

Aurora Multimedia – IPX-TCW3

Utilizing Aurora’s IPBaseT™ technology, which combines various IP/AV standards to work together as one, the IPX-TCW3 Series provides one of the most advanced IP Streaming solutions on the market.  Utilizing Aurora’s IPBaseT™ technology, which combines various IP/AV standards to work together as one, the IPX-TCW3 Series provides one of the most advanced IP Streaming solutions on the market. It is the industry’s first 4K2K IP wall plate with zero compression and latency based on BlueRiver NT™ platform. Using a transmitter (encoder) and receiver (decoder), respectively, used to be the standard – until now. The IPX-TCW3 Series can be set up as either one to make installation, inventory, and troubleshooting easier. Another industry first is the option slot to add other IP capabilities, like ExtremeUSB® (USB 2.0 over IP) or Dante® audio, for a more complete, distributed system. Audio, video, data, and control can be sent securely to one or many IPX-TCW3 transceiver units using off-the-shelf 10G Fiber or CAT Ethernet switches. When the IPX-TCW3 is set up to be a transmitter, the 2 HDMI inputs become a source switch and the HDMI output becomes a potential loop out. When set up as a receiver, a user can select the local HDMI inputs or an IP source. Seamless switching of the sources further enhances the presentation. Regardless of how the IPX-TCW3 is set up, the audio can be de-embedded at any location, break away, and/or be sent to or received from a Dante® enabled device. The USB 2.0 option is also flexible, working as a KVM and/or a high-speed data transfer (480Mbps) for memory sticks. Choice is important. That’s why the IPX-TCW3-F has an SFP+ port that can use single or multi-mode fiber and the IPX-TCW3-C can use Category 5e/6/6A – making the IPX-TCW3-F the ultimate AV IP product on the market today.
    I/O Interfaces
See the product
shuremxwapt8
  • Shure

Shure – MXWAPT8

The MXWAPT is a 8-channel wireless access point compatible with Microflex Wireless microphone systems. It uses automated frequency coordination to assign clean frequencies to wireless microphones and manages two-way wireless transmission of encrypted audio and control signals. Power to the unit (via PoE) and Dante digital networked audio are both supplied over a single Ethernet cable to simplify installation, and the supplied mounting plate and paintable cover allow discreet placement in boardrooms and conference rooms where low visibility is preferred.

    I/O Interfaces
  • Dante Ch: 8x0
  • 24-bit
See the product