BOX 2 * 2 / IO is a powerful digital signal processor that does not require extensive learning. It provides 2 microphone / line inputs and 2 line outputs with phantom power. Embedded installation, with many high-quality features, no design, no learning at all. A complete audio processing solution for the optimization of specific locations and systems. Suitable for retrofitting Dante ™ audio applications and upgrading traditional audio systems.
BR-102D is a Dante interface with 12 microphone inputs . It is ideal for adding microphone inputs to Dante systems. The BR-102D can be installed near the sound source to minimize analog wiring that is prone to interference. Dante connection simplifies the system's infrastructure wiring. Each BR-102D unit can be connected to a network switch using a category 5 network cable. All adjustable parameters of BR-102D can be controlled by dante controller software. The BR-102D has 12 balanced microphone inputs. Each microphone input comes with a 48v phantom power switch that can independently switch phantom power. Each channel independently displays the channel level, and has an independent switch to adjust the input microphone volume. The front panel has indicators to show the power and network status for easy troubleshooting.
The Quicklink TX Duo allows you to manage two simultaneous Skype calls to be processed as 2 SDI/NDI outputs. The TX Duo enables you to access 300 million Skype users for inclusion for remote interviews within live broadcasts, TV game shows, worship events or large managed corporate events.
The Quicklink TX Quad will allow you to easily manage 4 simultaneous incoming Skype calls to be processed as 4 SDI or NDI outputs in one single unit. A high availability upgrade option is available on this unit.
BR-102D is a Dante interface with 12 microphone inputs . It is ideal for adding microphone inputs to Dante systems. The BR-102D can be installed near the sound source to minimize analog wiring that is prone to interference. Dante connection simplifies the system's infrastructure wiring. Each BR-102D unit can be connected to a network switch using a category 5 network cable. All adjustable parameters of BR-102D can be controlled by dante controller software. The BR-102D has 12 balanced microphones inputs. Each microphone input comes with a 48v phantom power switch that can independently switch phantom power. Each channel independently displays the channel level, and has an independent switch to adjust the input microphone volume. The front panel has indicators to show the power and network status for easy troubleshooting.
BR-1016 network audio processor is an audio processing and control system that can be freely designed. It uses advanced DSP processing technology and has a new algorithm of automatic mixing and feedback cancellation, which can solve various practical problems in application scenarios. Since most of the controls are operated by software, the appearance is more concise and lively. The operator only needs to click the mouse lightly, instead of adjusting complex large-scale mixers on the spot to complete the function conversion as before, which greatly simplifies the operation.
The BR-106S network audio processor is an audio processing and control system that can be freely designed. It uses advanced DSP processing technology and has a new algorithm of automatic mixing and feedback cancellation, which can solve various practical problems in application scenarios. Since most of the controls are operated by software, the appearance is more concise and lively. The operator only needs to click the mouse lightly, instead of adjusting complex large-scale mixers on the spot to complete the function conversion as before, which greatly simplifies the operation.
BR-102S network audio processor is an audio processing and control system that can be freely designed. It uses advanced DSP processing technology and has a new algorithm of automatic mixing and feedback cancellation, which can solve various practical problems in application scenarios. Since most of the controls are operated by software, the appearance is more concise and lively. The operator only needs to click the mouse lightly, instead of adjusting complex large-scale mixers on the spot to complete the function conversion as before, which greatly simplifies the operation.
The BR-108S network audio processor is an audio processing and control system that can be freely designed. It uses advanced DSP processing technology and has a new algorithm of automatic mixing and feedback cancellation, which can solve various practical problems in application scenarios. Since most of the controls are operated by software, the appearance is more concise and lively. The operator only needs to click the mouse lightly, instead of adjusting complex large-scale mixers on the spot to complete the function conversion as before, which greatly simplifies the operation.
BR-104S digital audio processor is an audio processing and control system that can be freely designed. It uses advanced DSP processing technology and has a new algorithm of automatic mixing and feedback cancellation, which can solve various practical problems in application scenarios. Since most of the controls are operated by software, the appearance is more concise and lively. The operator only needs to click the mouse lightly, instead of adjusting complex large-scale mixers on the spot to complete the function conversion as before, which greatly simplifies the operation.
The BR-106A digital audio processor is an audio processing and control system that can be freely designed. It uses advanced DSP processing technology and has a new algorithm of automatic mixing and feedback cancellation, which can solve various practical problems in application scenarios. Since most of the controls are operated by software, the appearance is more concise and lively. The operator only needs to click the mouse lightly, instead of adjusting complex large-scale mixers on the spot to complete the function conversion as before, which greatly simplifies the operation.
BR-104A digital audio processor is an audio processing and control system that can be freely designed. It uses advanced DSP processing technology and has a new algorithm of automatic mixing and feedback cancellation, which can solve various practical problems in application scenarios. Since most of the controls are operated by software, the appearance is more concise and lively. The operator only needs to click the mouse lightly, instead of adjusting complex large-scale mixers on the spot to complete the function conversion as before, which greatly simplifies the operation.
TesiraCONNECT™ TC-5D serves as the central connection point for all Biamp® and Dante™ devices in a conference room. It simplifies installations by providing power and media over a single category cable between devices such as Tesira AVB DSPs, USB extenders, PoE+ amplifiers and microphones as well as 3rd party Dante devices. Four of the five Gigabit RJ-45 ports provide PoE+ power (IEEE 802.3at Class 4, 30W) to connected endpoints, while the remaining RJ-45 port is used for DSP connection or daisychaining
TesiraCONNECT devices together. TC-5D eliminates the need for third-party switches; it works out-of-the box with Tesira and Dante products and does not require any device configuration. The small form factor allows it to be easily mounted to a wall or under a table, or placed above the ceiling or inside a credenza in the conference room.
Bei Klangwert bekommen nur die innovativsten Produkte die Bezeichnung i. Das i steht für die Entwicklung und Nutzung von innovativen Ideen, aus denen intelligente, individuelle und intuitive Klangwert Produkte entstehen. High-End Produkte, die ein Zeichen setzen und inspirieren - Produkte vor allem für Ihre Anwendung.
Aus der Klangwert Controller Bibliothek können über 100 als Preset voreingestellte Lautsprecher Konfigurationen geladen werden, die im DSP der i 1200 D abrufbar sind. Dadurch wird das Optimum der Wiedergabequalität und bester Systemschutz erreicht.
Über die „easy-to-use“ PANC-Software lässt sich die i 1200 D leicht in einem IP-Netzwerk integrieren. Sämtliche anwendungsbezogene Konfigurationen können intuitiv in den internen Presets gespeichert und via UDP command abgerufen werden.
Antelope Audio’s first Dante interface is also the world’s first 64-channel AD/DA converter. Featuring all industry-standard analog and digital I/O within a 2U rack space, including 64 channels of analog in and 64 channels of analog out, Thunderbolt™ 3, DANTE, AES/EBU, HDX and MADI, the GALAXY 64 is equipped to handle all audio going in and out of your production facility or live venue.
The GALAXY 64 is a Synergy Core interface running both ARM DSP + FPGA chips, all in custom configurations, processing tens of input/output audio streams, and hundreds of low latency studio effects, all without burdening your CPU. With a total of 12x ARM DSP + 3x FPGA units on-board, a single GALAXY 64 can handle large sessions with hundreds of FX instances applied to each individual project, while employing a 3rd FPGA chip to process the routing matrix and manage conversion.
Designed for world class studio recording, live venues, post-production, broadcast, large-scale scoring, and other enterprise applications, GALAXY 64 fits 64 channels of all-encompassing connectivity, class leading signal processing, and rock-solid reliability inside a single 2U rackmount unit.
The A164D Wall LCD is a 16 input 4 output I/O Expander that uses the Dante network protocol to provide fixed, additional I/O anywhere on a network and is designed for wall or floor mounting. It comes with 16 Mic Preamps on XLR inputs with Phantom Power status LEDs and four XLR Line Outs with direct preamp control from the 4REA4 controller software. It can run at both 48K and 96k sample rates and it is AES67 compatible. Primary and secondary Dante ports come with locking EtherCON connectors and can run in both redundant and switched mode. All LCD labels are dimmable and can be customised using Dante controller software.
The A168D Stage is a portable 16 input 8 output I/O Expander, again using the Dante network protocol to provide additional I/O anywhere on a network. It comes with 16 mic preamps on XLR inputs with Phantom Power status LEDs and 8 XLR line outputs with direct preamp control from the 4REA4 controller software. It runs at 48k and 96k and is AES67 compatible. Primary and secondary ports again come with locking EtherCON connectors and can run in redundant or switched mode.
The Glensound AoIP4I is packaged in a small & rugged format and designed for outside broadcast, theatre and location applications.
Both the AoIP4O and AoIP4I units are designed to easily and quickly interface existing analogue equipment to a Dante® / AES67 network audio system. Being powered by PoE means that only one cable needs to be connected to the network to carry both audio and power, providing flexibility and saving time on installation.
AoIP4I provides 4 balanced analogue audio inputs to a Dante®/AES67 audio network.
Robust proven construction techniques, simple reliable interface and excellent specification will help make your technician’s life hassle free, whilst the low cost and long asset life will keep the accountant satisfied.
The Glensound AoIP4O is packaged in a small & rugged format and designed for outside broadcast, theatre and location applications.
Both the AoIP4O and AoIP4I units are designed to easily and quickly interface existing analogue equipment to a Dante® / AES67 network audio system. Being powered by PoE means that only one cable needs to be connected to the network to carry both audio and power, providing flexibility and saving time on installation.
AoIP4O provides 4 balanced analogue audio Outputs from a Dante®/AES67 audio network.
Robust proven construction techniques, simple reliable interface and excellent specification will help make your technician’s life hassle free, whilst the low cost and long asset life will keep the accountant satisfied.
The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 16.0M provides 16 balanced analog audio inputs with terminal block connectors
. Each input accommodates
microphone through line level signals with a gain range of -60 to +24dBu. +48V
phantom power is individually switchable on each input. With Terminal block
termination.
RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming
status.
The Iyo family feature an embedded web server, allowing configuration and
monitoring of input and output levels. Routing is achieved using the Dante
Controller.
Power is provided from a built-in universal AC power supply. Redundant power is
available using an external 12VDC supply via a locking 2.1mm jack.
All units can also be operated in Livewire+ AES67 interoperability mode.
The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 0.32LR provides 32 balanced outputs. the output levels are configurable up to +24dBu. With RJ-45/StudioHub + GPIO Connector close-up.
RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status.
The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller.
Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack.
The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 0.16L provides 16 balanced outputs with terminal block termination.
The output levels are
configurable up to +24dBu. With terminal block termination.
RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming
status.
The Iyo family feature an embedded web server, allowing configuration and
monitoring of input and output levels. Routing is achieved using the Dante
Controller.
Power is provided from a built-in universal AC power supply. Redundant power is
available using an external 12VDC supply via a locking 2.1mm jack.
All units can also be operated in Livewire+ AES67 interoperability mode.
The ABX-6 Dante breakout box can be equipped with up to two 1000Base-X fiber transceivers (SFP module). That allows for redundant applications via fiber optical cable. Additionally, it has two 1000Base-T ethernet connections. Thus, ABX-6 supports a convenient connection to Focus Venue, Focus Modular or DI Amplifiers over long distances.
Main features
The AV-WALL-DT4o-B is a cost-effective wall box in an incredibly small size of less than 45x45mm.
The AV-WALL-DT4oB Dante offers 2x XLR Line out and a stereo Bluetooth out Interface to Dante with an OLED screen display plus a local push button for local control in an incredible small size of less than 45x45mm
The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 32.0M provides 32 balanced analog audio inputs and 0 outputs. With terminal block connectors.
Each input accommodates
microphone through line level signals with a gain range of -60 to +24dBu. +48V
phantom power is individually switchable on each input. With Terminal block
termination.
RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming
status.
The Iyo family feature an embedded web server, allowing configuration and
monitoring of input and output levels. Routing is achieved using the Dante
Controller.
Power is provided from a built-in universal AC power supply. Redundant power is
available using an external 12VDC supply via a locking 2.1mm jack.
All units can also be operated in Livewire+ AES67 interoperability mode.
The AV-WALL-DT4i-LE is a cost-effective wall box in an incredibly small size of less than 45x45mm.
Features:
The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 0.32L provides 32 balanced outputs. The output levels are configurable up to +24dBu. With terminal block termination.
RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status.
The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller.
Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack.
All units can also be operated in Livewire+ AES67 interoperability mode.
Third party applications that use Dante Ready™ allow customers to purchase and activate Dante audio channels after installation using the Dante Activator tool in Dante Controller 4.5 or higher. Dante Activator is tied to an active Audinate user account and accepts standard credit card payments.
Activation instructions:
