ATEN - VE66DTH

ATEN – VE66DTH

Product Information

ATEN VE66DTH is a Dante-enabled six−input/six−output Audio Interface with HDMI. Using Dante™ – the most popular audio networking solution created by Audinate, the VE66DTH is capable of delivering uncompressed, close-to-zero latency digital audio signals across your standard IP network. Key features include:

Features Dante™ networked audio interface – a complete audio networking solution that distributes uncompressed, multi-channel audio transmission via standard Ethernet networks, with near-zero latency and perfect synchronization
Integrates up to 6-channel balanced mono audio Line/Mic input signals onto a Dante-enabled audio system and supports both dynamic and condenser microphones
Delivers up to 6-channel balanced mono audio Line outputs from the Dante network to the audio system
Supports HDMI 2.0 input with HDCP 2.2 compliant & HDMI 2.0 local output

promedias – proDT XI UP

Flush-mounted connection with XLR Input female to Dante, EDIZIOdue

AES67 & DDM ready!
1x0 LINE IN (XLR female)
PoE / 5VDC Input DANTE® Broadway
Sample Rate: max. 192kHz | Latency: min. 0.25ms
Network Speed: 1Gb/s / 100Mb/s
Dimensions: Gr. I (1x1) - 88x88x72mm bzw. 67mm
Installation dimensions: Ø64x60mm bzw. Ø60x60mm (cutout x depth)
Color: white (Feller 61), similar to RAL 9010 (also available as standard, e.g. black 60 or option RAL/NCS colour!)

I/O Interfaces

See the product

Sonifex

Sonifex – AVN-AESIO8 8 AES3 Input, 8 AES3 Output Dante® Interface, PoE

The AVN-AESIO8 audio converter and interface converts up to eight digital stereo AES3 inputs and eight digital stereo AES3 outputs to and from the Dante Audio-over-IP networking standard. Each input can accept sample rates from 32kHz to 192kHz, which will be sample rate converted to the Dante system sample rate. A valid input signal is confirmed by front panel AES3 lock LEDs for each input. All outputs follow the Dante system sample rate.

This cost effective 1U rack-mount unit offers an easy solution for AV professionals and system integrators. It is simple to configure and operate, with all set-up done via the standard Dante Controller software and power via PoE (Power Over Ethernet).

All digital AES3 inputs and outputs are on high-quality Neutrik XLR connectors and there are front panel status/confidence LEDs for PoE, Link and Clock.

I/O Interfaces

Dante Ch: 16x16
16-bit, 24-bit, 32-bit

See the product

Muxlab

Muxlab – Bluetooth and Analog Audio to Dante Interface

The Bluetooth & Analog Audio to Dante Interface (Model 500555) is a two-way audio transmission panel for Bluetooth, Analog Audio and Dante. It connects to mobile phones, iPad, and other devices through Bluetooth interface or to analog audio sources, and converts the received audio signal into digital signal transmission through Dante network. Power, control, and audio data are transmitted by only one network cable, and there is no need to worry about ground loops or other audio issues. The Bluetooth Audio to Dante Interface is designed to be compatible with standard dual gang US wall boxes with Decora faceplates.

I/O Interfaces

See the product

ATEN – VE66DTH

Product Information

Similar Products

promedias – proDT XI UP

Sonifex – AVN-AESIO8 8 AES3 Input, 8 AES3 Output Dante® Interface, PoE

Muxlab – Bluetooth and Analog Audio to Dante Interface

Stay connected to Dante

Support

Company

Dante Networking Alliance