Blustream – DA22XLR-WP-US


Learn more

Similar Products

Dante官网logo
  • BARE

BARE – DP150

Features: A digital extender, when the conference system host has insufficient power supply or a long cable distance causes the signal to attenuate and cannot work normally, the use of the extender can achieve the function of power supply expansion and communication signal enhancement; Solve the problems of long-line transmission and signal attenuation, enable the system to carry more microphone units, and enhance the stability and reliability of the system.
    I/O Interfaces
fp-nml2_400px
  • RDL

RDL – FP-NML2

The FP-NML2 is a high quality Dante network to mic/line interface that converts two Dante channels to two balanced outputs. Each output is individually switch-selectable to mic or line level. The FP-NML2 is ideal for adapting standard audio amplifiers or equipment to a Dante network. Model FP-NML2P operates from PoE. The FP-NML2 is a high quality Dante network to mic/line interface that converts two Dante channels to two balanced outputs. Each output is individually switch-selectable to mic or line level. The FP-NML2 is ideal for adapting standard audio power amplifiers, or other audio equipment, to a Dante network. Each line output provides +4 dBu balanced for a network digital audio level of -18 dBFS. Crosstalk is below the noise floor between all outputs across the entire audio spectrum. The noise floor is better than 80 dB below operating level with greater than 18 dB of headroom. The FP-NML2 operates from 24 Vdc and is available in a PoE version: FP-NML2P. If PoE power and an external 24 Vdc supply are both feeding an FP-NML2P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. 
    I/O Interfaces
Dante官网logo
  • BARE

BARE – D-10D

Features: 1. PoE power supply; 2. Soft key-type user switch to avoid mechanical sound when switching the microphone; 3. The entire expandable Dante system has 512 two-way audio channels; 4. Use a network cable to connect to the switch; 5. There are a variety of switch modes to choose from, a variety of gains are available, and a low-cut switch; 6. Equipped with a 3-pin XLRF canon female socket, suitable for quick installation of any XLRM canon male output gooseneck microphone; The sturdy casing cast by die casting and the non-slip silicon foam at the bottom of the microphone holder can reduce the impact of desktop vibration on the microphone.
    I/O Interfaces